SN75LVPE3410

現行

PCIe® 3.0 8-Gbps 4 通道線性轉接驅動器

產品詳細資料

Type Redriver Protocols CXL, PCI/PCIe, PCIe, PCIe1, PCIe2, PCIe3 Applications Backplane, CXL, PCIE, PCIe, SAS, SATA Number of channels 4 Speed (max) (Gbpp) 8 Rating Catalog Operating temperature range (°C) 0 to 70
Type Redriver Protocols CXL, PCI/PCIe, PCIe, PCIe1, PCIe2, PCIe3 Applications Backplane, CXL, PCIE, PCIe, SAS, SATA Number of channels 4 Speed (max) (Gbpp) 8 Rating Catalog Operating temperature range (°C) 0 to 70
WQFN (RNQ) 40 24 mm² (6 mm × 4 mm)
  • Quad-channel linear equalizer supporting PCIe 1.0/2.0/3.0 up to 8 Gbps interfaces
  • CTLE boosts up to 12 dB at 4 GHz helps to extend channel reach
  • Ultra-low latency of 70 ps
  • Excellent return loss of -17 dB at 4 GHz
  • Low additive random jitter of 60 fs (typical) with PRBS data
  • Single 3.3-V supply
  • Internal voltage regulator provides immunity to supply noise
  • Low active power of 124 mW/channel
  • No heat sink required
  • Pin-strap or SMBus programming
  • Support for x2, x4, x8, x16 PCIe bus width with one or multiple SN75LVPE3410
  • Automatic receiver detection for PCIe use cases
  • Protocol agnostic linear redriver allows seamless support for PCIe link training
  • Commercial temperature range of 0°C to 70°C
  • 4.0 mm × 6.0 mm, 40 pin WQFN package
  • Quad-channel linear equalizer supporting PCIe 1.0/2.0/3.0 up to 8 Gbps interfaces
  • CTLE boosts up to 12 dB at 4 GHz helps to extend channel reach
  • Ultra-low latency of 70 ps
  • Excellent return loss of -17 dB at 4 GHz
  • Low additive random jitter of 60 fs (typical) with PRBS data
  • Single 3.3-V supply
  • Internal voltage regulator provides immunity to supply noise
  • Low active power of 124 mW/channel
  • No heat sink required
  • Pin-strap or SMBus programming
  • Support for x2, x4, x8, x16 PCIe bus width with one or multiple SN75LVPE3410
  • Automatic receiver detection for PCIe use cases
  • Protocol agnostic linear redriver allows seamless support for PCIe link training
  • Commercial temperature range of 0°C to 70°C
  • 4.0 mm × 6.0 mm, 40 pin WQFN package

The SN75LVPE3410 is a four channel low-power high-performance linear repeater or redriver designed to support PCI Express (PCIe™) Generation 1.0, 2.0 and 3.0.

The SN75LVPE3410 receivers deploy continuous time linear equalizers (CTLE) to provide a programmable high-frequency boost. The equalizer can open an input eye that is completely closed due to inter-symbol interference (ISI) induced by an interconnect medium, such as PCB traces. The CTLE receiver is followed by a linear output driver. The linear datapaths of SN75LVPE3410 preserve transmit preset signal characteristics. The linear redriver becomes part of the passive channel that as a whole get link trained for best transmit and receive equalization settings. This transparency in the link training protocol result in best electrical link and lowest possible latency. The programmable equalization of the device along with its linear datapaths maximizes the flexibility of physical placement within the interconnect channel and improves overall channel performance.

The programmable settings can be applied easily through software (SMBus or I 2C) or by using pin control.

The SN75LVPE3410 is a four channel low-power high-performance linear repeater or redriver designed to support PCI Express (PCIe™) Generation 1.0, 2.0 and 3.0.

The SN75LVPE3410 receivers deploy continuous time linear equalizers (CTLE) to provide a programmable high-frequency boost. The equalizer can open an input eye that is completely closed due to inter-symbol interference (ISI) induced by an interconnect medium, such as PCB traces. The CTLE receiver is followed by a linear output driver. The linear datapaths of SN75LVPE3410 preserve transmit preset signal characteristics. The linear redriver becomes part of the passive channel that as a whole get link trained for best transmit and receive equalization settings. This transparency in the link training protocol result in best electrical link and lowest possible latency. The programmable equalization of the device along with its linear datapaths maximizes the flexibility of physical placement within the interconnect channel and improves overall channel performance.

The programmable settings can be applied easily through software (SMBus or I 2C) or by using pin control.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 SN75LVPE3410 Quad-Channel PCI-Express 3.0 Linear Redriver datasheet PDF | HTML 2023/6/1
使用指南 SN75LVPE3410 Programming Guide PDF | HTML 2023/4/11

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DS160PR410EVM-RSC — 四通道 PCI-express gen-4 線性轉接驅動器評估模組

DS160PR410EVM-RSC 評估模組 (EVM) 提供完整的高頻寬平台,可評估德州儀器 DS160PR410 PCI-Express 線性轉接驅動器的訊號調整功能。其具有八個 DS160PR410 裝置,可延長 PCIe 4.0 16x 匯流排的傳輸距離。評估板可用來進行標準合規測試、性能評估和初始系統原型設計。
使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發模組 (EVM) 的 GUI

SIGCONARCHITECT3 — Texas Instruments SigCon Architect EVM GUI v3.0.0.14 Setup

Texas Instruments SigCon Architect EVM GUI v3.0.0.14 Setup
支援產品和硬體
開發模組 (EVM) 的 GUI

SIGCONARCHITECT3-WRTE — Texas Instruments SigCon Architect EVM GUI v3 Setup with RTE

Texas Instruments SigCon Architect EVM GUI v3 Setup with RTE
支援產品和硬體
支援軟體

SIGCONARCHITECT — SigCon Architect v2.0.0.8

SigCon Architect v2.0.0.8
支援產品和硬體
支援軟體

SIGCONARCHITECT-REPEATER-PROFILES — SigCon Architect Repeater Profiles v1.1

支援產品和硬體
支援軟體

SIGCONARCHITECT-RETIMER-PROFILES — SigCon Architect Retimer Profiles v1.3

支援產品和硬體
支援軟體

SIGCONARCHITECT-WRTE — SigCon Architect With RTE v2.0.0.8

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RNQ) 40 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片