首頁 音訊、觸覺和壓電 音訊放大器 通用型音訊放大器
首頁
音訊、觸覺和壓電
音訊放大器
通用型音訊放大器

TAS5701

現行

具 H/W 控制的 20-W 立體聲道、0 至 21-V 電源、數位輸入、開迴路 D 類音訊放大器

立即訂購
產品規格表

TAS5701

現行
產品規格表 立即訂購

產品詳細資料

Audio input type Digital Input Architecture Class-D Speaker channels (max) Stereo Control interface Hardware Output power (W) 20 Power stage supply (max) (V) 21 Power stage supply (min) (V) 10 THD + N at 1 kHz (%) 0.05 Load (min) (Ω) 6 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 3.6 Rating Catalog Operating temperature range (°C) 0 to 85
Audio input type Digital Input Architecture Class-D Speaker channels (max) Stereo Control interface Hardware Output power (W) 20 Power stage supply (max) (V) 21 Power stage supply (min) (V) 10 THD + N at 1 kHz (%) 0.05 Load (min) (Ω) 6 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 3.6 Rating Catalog Operating temperature range (°C) 0 to 85
HTQFP (PAP) 64 144 mm² (12 mm × 12 mm)
  • Audio Input/Output
    • 20-W Into an 8- Load From an 18-V Supply
    • Wide PVDD Range (0 V to 21 V)
    • Efficient Class-D Operation Eliminates Need for Heat Sinks
    • Two Serial Audio Inputs (3 Audio channels)
    • Supports 32-kHz to 192-kHz Sample Rates (LJ/RJ/I2S)
    • Line-Level Subwoofer PWM Outputs
  • Audio/PWM Processing
    • BD (Filter-free) Modulation Supporting Bridge-Tied Loads ONLY
    • 4-Step Volume Control (0 dB, 6 dB, 12 dB, 18 dB)
      – All Channels Share Same Control
    • Soft Mute (50% Duty Cycle)
    • DC Blocking Filters
    • Fixed Maximum Modulation Limit At 97.7%
    • ≥100-dB SNR – Measured at Maximum Output With THD+N = 1%, 1 kHz,
      A-Weighted Noise, Gain = 0 dB
    • THD < 0.1% at 1/2 Rated Power
  • General Features
    • 5-V Tolerant Inputs (See pin list for details on which inputs are 5-V tolerant)
    • Shutdown Mode for Low Power Consumption
    • Thermal and Short-Circuit Protection
    • Autodetect: Automatically Detect Sample-Rate Changes –
      No Need for External Microprocessor Intervention
  • Audio Input/Output
    • 20-W Into an 8- Load From an 18-V Supply
    • Wide PVDD Range (0 V to 21 V)
    • Efficient Class-D Operation Eliminates Need for Heat Sinks
    • Two Serial Audio Inputs (3 Audio channels)
    • Supports 32-kHz to 192-kHz Sample Rates (LJ/RJ/I2S)
    • Line-Level Subwoofer PWM Outputs
  • Audio/PWM Processing
    • BD (Filter-free) Modulation Supporting Bridge-Tied Loads ONLY
    • 4-Step Volume Control (0 dB, 6 dB, 12 dB, 18 dB)
      – All Channels Share Same Control
    • Soft Mute (50% Duty Cycle)
    • DC Blocking Filters
    • Fixed Maximum Modulation Limit At 97.7%
    • ≥100-dB SNR – Measured at Maximum Output With THD+N = 1%, 1 kHz,
      A-Weighted Noise, Gain = 0 dB
    • THD < 0.1% at 1/2 Rated Power
  • General Features
    • 5-V Tolerant Inputs (See pin list for details on which inputs are 5-V tolerant)
    • Shutdown Mode for Low Power Consumption
    • Thermal and Short-Circuit Protection
    • Autodetect: Automatically Detect Sample-Rate Changes –
      No Need for External Microprocessor Intervention

The TAS5701 is a 20-W efficient, digital audio power amplifier for driving stereo bridge-tied speakers. Two serial data inputs support up to 3 discrete audio channels. The SDIN1 input is routed to the internal left and right outputs. The SDIN2 input is dedicated to the SUB_PWM± outputs.

The TAS5701 is a clock slave-only device receiving clocks from external sources. The TAS5701 operates at a 384-kHz switching rate for 32-, 48-, 96-, and 192-kHz data and 352.8-kHz switching rate 44.1-,88.2-, and 176.4-kHz data. The 8× oversampling combined with the fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

The TAS5701 is a 20-W efficient, digital audio power amplifier for driving stereo bridge-tied speakers. Two serial data inputs support up to 3 discrete audio channels. The SDIN1 input is routed to the internal left and right outputs. The SDIN2 input is dedicated to the SUB_PWM± outputs.

The TAS5701 is a clock slave-only device receiving clocks from external sources. The TAS5701 operates at a 384-kHz switching rate for 32-, 48-, 96-, and 192-kHz data and 352.8-kHz switching rate 44.1-,88.2-, and 176.4-kHz data. The 8× oversampling combined with the fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.
filter 尋找其它 通用型音訊放大器
下載 觀看有字幕稿的影片 影片

具 EQ 和 3 頻帶 AGL 的新一代 20W 立體聲道、16V 開迴路數位輸入音訊 D 類放大器：  TAS5733L

具有 EQ 和 3 頻帶 AGL 的新一代 25W 立體聲道、26V 開迴路數位輸入音訊 D 類放大器：  TAS5751M

具 EQ、3 頻帶 AGL 和耳機輸出的新一代 25W 立體聲道、26V 開迴路數位輸入音訊 D 類放大器：  TAS5753MD

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 20-W Stereo Digital Audio Power Amplifier, TAS5701 datasheet (Rev. A) 2010/7/19
應用說明 Using Thermal Calculation Tools for Analog Components (Rev. A) 2019/8/30
應用說明 Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) 2019/8/26
應用說明 AN-1849 An Audio Amplifier Power Supply Design (Rev. C) 2019/6/27
應用說明 AN-1737 Managing EMI in Class D Audio Applications (Rev. A) 2013/5/1

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTQFP (PAP) 64 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片