首頁 音訊、觸覺和壓電 音訊放大器 喇叭、電視與條型音箱音訊放大器
首頁
音訊、觸覺和壓電
音訊放大器
喇叭、電視與條型音箱音訊放大器

TAS5753MD

現行

具有 AGL 和 HP 的 20-W 立體聲道、39-W 單聲道、4.5 至 26.4-V、數位輸入開迴路 D 類音訊放大器

立即訂購
產品規格表

TAS5753MD

現行
產品規格表 立即訂購

產品詳細資料

Audio input type Digital Input Architecture Class-D Speaker channels (max) Stereo Control interface I2C Output power (W) 20 Power stage supply (max) (V) 26.4 Power stage supply (min) (V) 8 RDS(on) (Ω) 0.16 THD + N at 1 kHz (%) 0.13 Load (min) (Ω) 2 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 3.6 Rating Catalog Operating temperature range (°C) 0 to 85
Audio input type Digital Input Architecture Class-D Speaker channels (max) Stereo Control interface I2C Output power (W) 20 Power stage supply (max) (V) 26.4 Power stage supply (min) (V) 8 RDS(on) (Ω) 0.16 THD + N at 1 kHz (%) 0.13 Load (min) (Ω) 2 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 3.6 Rating Catalog Operating temperature range (°C) 0 to 85
HTSSOP (DCA) 48 101.25 mm² (12.5 mm × 8.1 mm)
  • Audio Input/Output
    • Supports BTL Configuration With 4-Ω Load
    • One Stereo Serial Audio Input
    • I2C Address Selection Pin
    • Supports 44.1-kHz and 48-kHz Sample Rates (LJ/RJ/I2S)
  • Headphone Amplifier and Line Driver
    • Independent Channel Volume Controls With Gain of 24 dB to Mute in 0.125-dB Steps
    • Programmable Three-Band Automatic Gain Limiting (AGL)
    • 20 Programmable Biquads for Speaker EQ and Other Audio-Processing Features
  • General Features
    • I2C Serial Control Interface Operational Without MCLK
    • Automatic Rate Detection
    • Thermal, Short-Circuit, and Undervoltage Protection
    • 105-dB SNR, A-Weighted, Referenced to Full Scale (0 dB)
    • Up to 90% Efficient
    • AD, BD, and Ternary Modulation
    • PWM Level Meter
    • Operates from 4.5-V to 24-V PVDD
  • Audio Input/Output
    • Supports BTL Configuration With 4-Ω Load
    • One Stereo Serial Audio Input
    • I2C Address Selection Pin
    • Supports 44.1-kHz and 48-kHz Sample Rates (LJ/RJ/I2S)
  • Headphone Amplifier and Line Driver
    • Independent Channel Volume Controls With Gain of 24 dB to Mute in 0.125-dB Steps
    • Programmable Three-Band Automatic Gain Limiting (AGL)
    • 20 Programmable Biquads for Speaker EQ and Other Audio-Processing Features
  • General Features
    • I2C Serial Control Interface Operational Without MCLK
    • Automatic Rate Detection
    • Thermal, Short-Circuit, and Undervoltage Protection
    • 105-dB SNR, A-Weighted, Referenced to Full Scale (0 dB)
    • Up to 90% Efficient
    • AD, BD, and Ternary Modulation
    • PWM Level Meter
    • Operates from 4.5-V to 24-V PVDD

The TAS5753MD device is an efficient, digital-input audio amplifier for driving stereo speakers configured as a bridge tied load (BTL). One serial data input allows processing of up to two discrete audio channels and seamless integration to most digital audio processors and MPEG decoders. The device accepts a wide range of input data and data rates. A fully programmable data path routes these channels to the internal speaker drivers.

The TAS5753MD device is a slave-only device receiving all clocks from external sources. The TAS5753MD device operates with a PWM carrier between a 384-kHz switching rate and a 288-kHz switching rate, depending on the input sample rate. Oversampling combined with a fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz. The device has an integrated Directpath™ Headphone amplifier and linedriver to increase the system-level integration and reduce total solution costs.

The TAS5753MD device is an efficient, digital-input audio amplifier for driving stereo speakers configured as a bridge tied load (BTL). One serial data input allows processing of up to two discrete audio channels and seamless integration to most digital audio processors and MPEG decoders. The device accepts a wide range of input data and data rates. A fully programmable data path routes these channels to the internal speaker drivers.

The TAS5753MD device is a slave-only device receiving all clocks from external sources. The TAS5753MD device operates with a PWM carrier between a 384-kHz switching rate and a 288-kHz switching rate, depending on the input sample rate. Oversampling combined with a fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz. The device has an integrated Directpath™ Headphone amplifier and linedriver to increase the system-level integration and reduce total solution costs.
filter 尋找其它 喇叭、電視與條型音箱音訊放大器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TAS5753MD 20-W I²S Input Class-D Amplifier With Digital Audio Processor and DirectPath™ HP and Line Driver datasheet (Rev. C) PDF | HTML 2017/5/15

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TAS5753MDEVM — 具有整合式耳機/線路驅動器的 TAS5753MD I2S 輸入、開迴路音訊放大器評估模組

TAS5753MDEVM 可用於評估德州儀器的 TAS5753MD — 一款 I2S 輸入的開環式功率放大器。此評估模組上配有兩個 TAS5753MD 裝置，一個設定為雙聲道運作，另一個設定為單聲道運作。TAS5733L 結合一個 PWM 處理器與開環式 D 類音訊功率放大器。TAS5753MDEVM 透過單一 8V 至 26.4V 的電源供電運作。TAS5733LEVM 結合 PurePath™ Console 主機板（PurePath-CMBEVM — 需另行訂購）與 PurePath™ Console GUI（PurePathConsole — (...)

使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
支援軟體

TAS5753MD-SW — TAS5753MD Software Product

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (DCA) 48 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片