首頁 介面 高速 SerDes V3Link SerDes
首頁
介面
高速 SerDes
V3Link SerDes

TDES954

現行

適用高速感測器的 4.16-Gbps MIPI® CSI-2 V³Link 解串列雙集線器

立即訂購
產品規格表

TDES954

現行
產品規格表 立即訂購

產品詳細資料

Applications Camera SerDes Color depth (bpp) 24 Function Deserializer Input compatibility V3Link Pixel clock frequency (max) (MHz) 100 Output compatibility MIPI CSI-2 Features CRC, Coax or STP, Flexible GPIOs, Internal Programmable Precision Frame Sync Generator, Line Fault Detection, Pattern Generation, Ultra-Low Data and Control Path Latency Signal conditioning Adaptive Equalizer, Programmable Equalizer EMI reduction LVDS Diagnostics BIST Rating Catalog Operating temperature range (°C) -20 to 85
Applications Camera SerDes Color depth (bpp) 24 Function Deserializer Input compatibility V3Link Pixel clock frequency (max) (MHz) 100 Output compatibility MIPI CSI-2 Features CRC, Coax or STP, Flexible GPIOs, Internal Programmable Precision Frame Sync Generator, Line Fault Detection, Pattern Generation, Ultra-Low Data and Control Path Latency Signal conditioning Adaptive Equalizer, Programmable Equalizer EMI reduction LVDS Diagnostics BIST Rating Catalog Operating temperature range (°C) -20 to 85
VQFN (RGZ) 48 49 mm² (7 mm × 7 mm)
  • Dual deserializer hub aggregates one or two active sensors over V3Link interface
  • Device temperature range: –20℃ to +85℃ TA
  • Power-over-coax (PoC) compatible transceiver
  • MIPI DPHY version 1.2 / CSI-2 version 1.3 compliant:
    • CSI-2 output ports
    • Supports 1, 2, 3, 4 data lanes
    • CSI-2 data rate scalable for 400 Mbps / 800 Mbps / 1.5 Gbps / 1.6 Gbps each data lane
    • Programmable data types
    • Four virtual channels
    • ECC and CRC generation
  • Ultra-low data and control path latency
  • Supports single-ended coaxial or shielded twisted-pair (STP) cable
  • Adaptive receive equalization
  • I2C with fast-mode plus up to 1 Mbps
  • Flexible GPIOs for camera synchronization and diagnostics
  • Compatible with TSER953 serializer
  • Line fault detection and advanced diagnostics
  • IEC 61000-4-2 ESD compliant
  • Dual deserializer hub aggregates one or two active sensors over V3Link interface
  • Device temperature range: –20℃ to +85℃ TA
  • Power-over-coax (PoC) compatible transceiver
  • MIPI DPHY version 1.2 / CSI-2 version 1.3 compliant:
    • CSI-2 output ports
    • Supports 1, 2, 3, 4 data lanes
    • CSI-2 data rate scalable for 400 Mbps / 800 Mbps / 1.5 Gbps / 1.6 Gbps each data lane
    • Programmable data types
    • Four virtual channels
    • ECC and CRC generation
  • Ultra-low data and control path latency
  • Supports single-ended coaxial or shielded twisted-pair (STP) cable
  • Adaptive receive equalization
  • I2C with fast-mode plus up to 1 Mbps
  • Flexible GPIOs for camera synchronization and diagnostics
  • Compatible with TSER953 serializer
  • Line fault detection and advanced diagnostics
  • IEC 61000-4-2 ESD compliant

The TDES954 is a versatile dual deserializer hub capable of receiving serialized sensor data from one or two independent sources through a V3Link interface. When paired with a TSER953 serializer, the TDES954 receives data from imagers, supporting 2MP/60fps and 4MP/30fps cameras as well as satellite RADAR and other sensors such as ToF and LIDAR. Data is received and aggregated into a MIPI CSI-2 compliant output for interconnect to a downstream processor. For sensors with DVP Mode serializers, the TDES954 receives and aggregates data from one or two sensors including Full HD 1080p 2MP 60/fps imager sensors. When configuring the CSI-2 interface for 2-lane operation, a duplicate MIPI CSI-2 clock lane is available to provide a replicated output. Replication mode creates two copies of the aggregated video stream for data logging and parallel processing.

The TDES954 and partner TSER953 chipset is designed to receive data across either 50-Ω single-ended coaxial or 100-Ω differential STP cables. The deserializer hub is ideal for Power-over-Coax applications and the receive equalizer automatically adapts to compensate for cable loss characteristics with no additional programming required, including cable degradation over time.

Each V3Link interface includes a separate low latency bidirectional control channel (BCC) that continuously conveys I2C, GPIO, and other control information. GPIO signals purposed for sensor synchronization and diagnostic features also make use of the BCC.

The TDES954 is a versatile dual deserializer hub capable of receiving serialized sensor data from one or two independent sources through a V3Link interface. When paired with a TSER953 serializer, the TDES954 receives data from imagers, supporting 2MP/60fps and 4MP/30fps cameras as well as satellite RADAR and other sensors such as ToF and LIDAR. Data is received and aggregated into a MIPI CSI-2 compliant output for interconnect to a downstream processor. For sensors with DVP Mode serializers, the TDES954 receives and aggregates data from one or two sensors including Full HD 1080p 2MP 60/fps imager sensors. When configuring the CSI-2 interface for 2-lane operation, a duplicate MIPI CSI-2 clock lane is available to provide a replicated output. Replication mode creates two copies of the aggregated video stream for data logging and parallel processing.

The TDES954 and partner TSER953 chipset is designed to receive data across either 50-Ω single-ended coaxial or 100-Ω differential STP cables. The deserializer hub is ideal for Power-over-Coax applications and the receive equalizer automatically adapts to compensate for cable loss characteristics with no additional programming required, including cable degradation over time.

Each V3Link interface includes a separate low latency bidirectional control channel (BCC) that continuously conveys I2C, GPIO, and other control information. GPIO signals purposed for sensor synchronization and diagnostic features also make use of the BCC.
filter 尋找其它 V3Link SerDes
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TDES954 Dual 4.16 Gbps V3Link Deserializer Hub With MIPI CSI-2 Interface for High Speed, High Resolution Cameras, RADAR, and Other Sensors datasheet (Rev. A) PDF | HTML 2023/2/11
技術文章 How to transfer high-resolution video data over a single wire in machine vision-ba PDF | HTML 2021/7/12

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DS90UB954-Q1EVM — FPD-link III 攝影機解串器評估模組

德州儀器 DS90UB954-Q1EVM 評估模組 (EVM) 是一款功能板設計，用於評估 DS90UB954-Q1 FPD-Link III 解序列集線器，可將序列化感測器資料轉換為 MIPI CSI-2 以進行處理。其配置為與最多兩個使用標準 FAKRA 電纜組件的 DS90UB953-Q1 或 DS90UB933-Q1 串聯器通訊。板載 MSP430 與 AnalogLaunchPAD GUI 工具耦合，可提供與 PC 的介面，以輕鬆進行裝置評估。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發套件

ARDCM-3P-V3LINK-CAM — ArduCam 多通道攝影機模組快速原型套件以 V3Link SerDes 裝置為基礎

Arducam 的 V3Link 攝影機套件擁有全高畫質，配備 IMX219 感測器和 V3Link 介面，是高頻寬、長距離視覺投影的首選。採用屏蔽式同軸纜線，確保在長達 10 公尺的距離內提供可靠電力與資料傳輸，並維持低延遲以達最佳效能。

此套件配備 4 個 8-MP 攝影機模組，可靈活切換頻道或獨立控制。實現多攝影機同步與遠端控制，提供無與倫比的靈活性和便利性。

從：ArduCam
支援產品和硬體
應用軟體及架構

ALP — Analog LaunchPad Framework Utility

To get started with Analog LaunchPad (ALP) software: Download and install the ALP Framework Utility. Add new device profiles and example scripts with the ALP-PROFILE-UPDATE tool.
支援產品和硬體
支援軟體

ALP-PROFILE-UPDATE — Analog LaunchPad Profile Update Software

ALP Profile Update contains latest fixes and updates to ALP profiles. If you are installing for the first time please install ALP Profile Update after installing ALP Framework.
支援產品和硬體
模擬型號

TDES954 IBIS Model

SNLM247.ZIP (212 KB) - IBIS 模型
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGZ) 48 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片