TDES9640

現行

適用高速感測器的 7.55-Gbps MIPI® CSI-2 V³Link™ 解串列四集線器

立即訂購

產品規格表

document-pdfAcrobat TDES9640 V3LinkTMDeserializer Hub With CSI-2 Output Ports for 8-MP+ Cameras and Other Sensors datasheet (Rev. A) (英文) PDF | HTML

TDES9640

現行

產品規格表

立即訂購

產品詳細資料

Applications

Camera SerDes

Color depth (bpp)

24

Function

Deserializer

Input compatibility

V3Link

Pixel clock frequency (max) (MHz)

100

Output compatibility

MIPI CSI-2

Features

Coax or STP, Flexible GPIOs, Internal Programmable Precision Frame Sync Generator, Line Fault Detection, Pattern Generation, Port Replication Mode, Ultra-Low Data and Control Path Latency

Signal conditioning

Adaptive Equalizer, Programmable Equalizer

EMI reduction

LVDS, SSC Compatible

Diagnostics

BIST

Rating

Catalog

Operating temperature range (°C)

-20 to 85

Applications

Camera SerDes

Color depth (bpp)

24

Function

Deserializer

Input compatibility

V3Link

Pixel clock frequency (max) (MHz)

100

Output compatibility

MIPI CSI-2

Features

Coax or STP, Flexible GPIOs, Internal Programmable Precision Frame Sync Generator, Line Fault Detection, Pattern Generation, Port Replication Mode, Ultra-Low Data and Control Path Latency

Signal conditioning

Adaptive Equalizer, Programmable Equalizer

EMI reduction

LVDS, SSC Compatible

Diagnostics

BIST

Rating

Catalog

Operating temperature range (°C)

-20 to 85

VQFNP (RUR)

88

144 mm² (12 mm × 12 mm)

Quad 7.55 Gbps deserializer hub aggregates data from up to 4 sensors simultaneously
- Supports 8MP+ imagers
- Single-ended coaxial or shielded twisted-pair (STP) cable
- Power-over-coax (PoC) support
Supports 3 data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps
CSI v2.1 compliant system interface
Supports up to 2 MIPI CSI-2 output ports and 1 replication port
- CSI Port 0: MIPI CSI-2 output port
- CSI Port 1: MIPI CSI-2 output port
- CSI Port 2: replication port (D-PHY only)
- 16 Virtual channels and VC-ID remapping
- MIPI D-PHY and C-PHY configurable
MIPI D-PHY v2.1 compatible
- Up to 4 data lanes with 2 clocks per port
- Up to 2.5 Gbps per lane, 10 Gbps per port
MIPI C-PHY v1.1 compatible
- Up to 4 trios per port
- Up to 5.7 Gbps per trio, 22.8 Gbps per port
Quad CMLOUT output ports for off-board processing
- 4 x CMLOUT ports replicated from 4 x V 3Link RX ports
- Capable of driving another deserializer at the same line rate
10 GPIO pins for sensor synchronization and diagnostics
Dual I2C ports
Frozen frame detection
Automatic receiver equalization
Compatible with TSER9615, TSER953, and with the TSER4905 (when used in Enhanced Vision mode)
Low power sleep mode with GPIO-state retention
Wide temperature range: -20°C to 85°C

Quad 7.55 Gbps deserializer hub aggregates data from up to 4 sensors simultaneously
- Supports 8MP+ imagers
- Single-ended coaxial or shielded twisted-pair (STP) cable
- Power-over-coax (PoC) support
Supports 3 data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps
CSI v2.1 compliant system interface
Supports up to 2 MIPI CSI-2 output ports and 1 replication port
- CSI Port 0: MIPI CSI-2 output port
- CSI Port 1: MIPI CSI-2 output port
- CSI Port 2: replication port (D-PHY only)
- 16 Virtual channels and VC-ID remapping
- MIPI D-PHY and C-PHY configurable
MIPI D-PHY v2.1 compatible
- Up to 4 data lanes with 2 clocks per port
- Up to 2.5 Gbps per lane, 10 Gbps per port
MIPI C-PHY v1.1 compatible
- Up to 4 trios per port
- Up to 5.7 Gbps per trio, 22.8 Gbps per port
Quad CMLOUT output ports for off-board processing
- 4 x CMLOUT ports replicated from 4 x V 3Link RX ports
- Capable of driving another deserializer at the same line rate
10 GPIO pins for sensor synchronization and diagnostics
Dual I2C ports
Frozen frame detection
Automatic receiver equalization
Compatible with TSER9615, TSER953, and with the TSER4905 (when used in Enhanced Vision mode)
Low power sleep mode with GPIO-state retention
Wide temperature range: -20°C to 85°C

The TDES9640 is a V 3Link Enhanced Vision deserializer that delivers robust ultra-high-speed 7.55 Gbps forward channel and 47.1875 Mbps bidirectional control channel for connecting up to 4 data sensors to the processing unit over a coaxial or STP cable. When paired with the TSER9615 or the TSER4905 serializers, the TDES9640 receives video data from image sensors or video sources supporting ultra-high resolutions or multiple sensors in various topologies.

Data is received and aggregated into two MIPI CSI-2 D-PHY or C-PHY outputs for interfacing with a downstream processor. An additional CSI port is used for port replication in D-PHY mode only. The flexible MIPI CSI-2 outputs support multiple virtual channels interleaving per port to differentiate multiple sensors, exposures, and data types. This functionality features video aggregation and replication modes and supports input-to-output port as well as virtual channel (VC-ID) remapping.

The TDES9640 supports advanced data protection and diagnostic features, as well as multiple levels of data integrity checking and protection in conjunction with programmable health status interrupt, which helps achieve robust sensor module and link operation in the end application.

The TDES9640 is a V 3Link Enhanced Vision deserializer that delivers robust ultra-high-speed 7.55 Gbps forward channel and 47.1875 Mbps bidirectional control channel for connecting up to 4 data sensors to the processing unit over a coaxial or STP cable. When paired with the TSER9615 or the TSER4905 serializers, the TDES9640 receives video data from image sensors or video sources supporting ultra-high resolutions or multiple sensors in various topologies.

Data is received and aggregated into two MIPI CSI-2 D-PHY or C-PHY outputs for interfacing with a downstream processor. An additional CSI port is used for port replication in D-PHY mode only. The flexible MIPI CSI-2 outputs support multiple virtual channels interleaving per port to differentiate multiple sensors, exposures, and data types. This functionality features video aggregation and replication modes and supports input-to-output port as well as virtual channel (VC-ID) remapping.

The TDES9640 supports advanced data protection and diagnostic features, as well as multiple levels of data integrity checking and protection in conjunction with programmable health status interrupt, which helps achieve robust sensor module and link operation in the end application.

filter

尋找其它 V3Link SerDes

下載觀看有字幕稿的影片影片

索取更多資訊

提供完整產品規格表及其他資源。立即索取

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 1

重要文件	類型	標題	格式選項	下載最新的英文版本		日期
*	資料表	TDES9640 V3LinkTMDeserializer Hub With CSI-2 Output Ports for 8-MP+ Cameras and Other Sensors datasheet (Rev. A)	PDF \| HTML			2023/11/16

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DS90UB9702-Q1EVM — DS90UB9702-Q1 評估模組

DS90UB9702-Q1EVM 評估模組 (EVM) 是一款功能板設計，用於評估 DS90UB9702-Q1 FPD-Link IV 解串列集線器。DS90UB9702-Q1 是一款多功能解串器，能夠使用 FPD-Link III 和 FPD-Link IV 串聯器從多達四個獨立視訊來源接收數據。與 DS90UB971-Q1 串聯器配對時，DS90UB9702-Q1 可以接收來自 8MP+ 成像儀的高色深數據。它具有兩個獨立的 MIPI DPHY CSI-2 輸出埠和一個複製 CSI-2 埠，每個埠有四個可用通道，每個通道支援最高 2.5Gbps 的速度。此裝置也支援 4x CML (...)

支援產品和硬體

要求

應用軟體及架構

ALP — Analog LaunchPad Framework Utility

To get started with Analog LaunchPad (ALP) software: Download and install the ALP Framework Utility. Add new device profiles and example scripts with the ALP-PROFILE-UPDATE tool.

支援產品和硬體

下載選項

支援軟體

ALP-PROFILE-UPDATE — Analog LaunchPad Profile Update Software

ALP Profile Update contains latest fixes and updates to ALP profiles. If you are installing for the first time please install ALP Profile Update after installing ALP Framework.

支援產品和硬體

下載選項

模擬型號