THVD2410

現行

具有 IEC ESD 的 ±70-V 故障保護 3.3-V 至 5-V RS-485 收發器

立即訂購

產品規格表

document-pdfAcrobat THVD24x0 ±70-V Fault-Protected 3.3-V to 5-V RS-485 Transceivers With IEC ESD datasheet (Rev. B) (英文) PDF | HTML

THVD2410

現行

立即訂購

產品詳細資料

Number of receivers

1

Number of transmitters

1

Duplex

Half

Signaling rate (max) (Mbps)

0.5

IEC 61000-4-2 contact (±V)

12000

Fault protection (V)

-70 to 70

Common-mode range (V)

-25 to 25

Number of nodes

256

Features

Extended common mode, Fault protection, IEC ESD protection

Isolated

No

Supply current (max) (µA)

5600

Rating

Catalog

Operating temperature range (°C)

-40 to 125

TI functional safety category

Functional Safety-Capable

Number of receivers

1

Number of transmitters

1

Duplex

Half

Signaling rate (max) (Mbps)

0.5

IEC 61000-4-2 contact (±V)

12000

Fault protection (V)

-70 to 70

Common-mode range (V)

-25 to 25

Number of nodes

256

Features

Extended common mode, Fault protection, IEC ESD protection

Isolated

No

Supply current (max) (µA)

5600

Rating

Catalog

Operating temperature range (°C)

-40 to 125

TI functional safety category

Functional Safety-Capable

VSON (DRB)

8

9 mm² (3 mm × 3 mm)

SOIC (D)

8

29.4 mm² (4.9 mm × 6 mm)

VSSOP (DGK)

8

14.7 mm² (3 mm × 4.9 mm)

Meets or exceeds the requirements of the TIA/EIA-485A and TIA/EIA-422B standards
Functional Safety-Capable
- Documentation available to aid functional safety system design
3-V to 5.5-V supply voltage
Differential output exceeds 2.1 V for PROFIBUS compatibility with 5-V supply
Bus I/O protection
- ±70-V DC bus fault
- ±16-kV HBM ESD
- ±12-kV IEC 61000-4-2 contact discharge
- ±12-kV IEC 61000-4-2 air-gap discharge
- ±4-kV IEC 61000-4-4 fast transient burst
Half-duplex devices available in two speed grades
- THVD2410: 500 kbps
- THVD2450: 50 Mbps
Extended ambient temperature range: -40°C to 125°C
Extended operational common-mode range: ±25 V
Enhanced receiver hysteresis for noise immunity
Low power consumption
- Low shutdown supply current: < 1 µA
- Current during operation: < 5.6 mA
Glitch-free power-up/down for hot plug-in capability
Open, short, and idle bus failsafe
Thermal shutdown
1/8 unit load (up to 256 bus nodes)
Small VSON and VSSOP packages to save board space or SOIC for drop-in compatibility

Meets or exceeds the requirements of the TIA/EIA-485A and TIA/EIA-422B standards
Functional Safety-Capable
- Documentation available to aid functional safety system design
3-V to 5.5-V supply voltage
Differential output exceeds 2.1 V for PROFIBUS compatibility with 5-V supply
Bus I/O protection
- ±70-V DC bus fault
- ±16-kV HBM ESD
- ±12-kV IEC 61000-4-2 contact discharge
- ±12-kV IEC 61000-4-2 air-gap discharge
- ±4-kV IEC 61000-4-4 fast transient burst
Half-duplex devices available in two speed grades
- THVD2410: 500 kbps
- THVD2450: 50 Mbps
Extended ambient temperature range: -40°C to 125°C
Extended operational common-mode range: ±25 V
Enhanced receiver hysteresis for noise immunity
Low power consumption
- Low shutdown supply current: < 1 µA
- Current during operation: < 5.6 mA
Glitch-free power-up/down for hot plug-in capability
Open, short, and idle bus failsafe
Thermal shutdown
1/8 unit load (up to 256 bus nodes)
Small VSON and VSSOP packages to save board space or SOIC for drop-in compatibility

THVD2410 and THVD2450 are ±70-V fault-protected, half-duplex, RS-422/RS-485 transceivers operating on a single 3-V to 5.5-V supply. Bus interface pins are protected against overvoltage conditions during all modes of operation ensuring robust communication in rugged industrial environments.

These devices feature integrated IEC ESD protection, eliminating the need for external system-level protection components. Extended ±25-V input common-mode range guarantees reliable data communication over longer cable run lengths and/or in the presence of large ground loop voltages. Enhanced 250-mV receiver hysteresis ensures high noise rejection. In addition, the receiver fail-safe feature guarantees a logic high when the inputs are open or shorted together.

THVD24x0 devices are available in small VSSOP and VSON packages for space-constrained applications. These devices are characterized over ambient free-air temperatures from –40°C to 125°C.

THVD2410 and THVD2450 are ±70-V fault-protected, half-duplex, RS-422/RS-485 transceivers operating on a single 3-V to 5.5-V supply. Bus interface pins are protected against overvoltage conditions during all modes of operation ensuring robust communication in rugged industrial environments.

These devices feature integrated IEC ESD protection, eliminating the need for external system-level protection components. Extended ±25-V input common-mode range guarantees reliable data communication over longer cable run lengths and/or in the presence of large ground loop voltages. Enhanced 250-mV receiver hysteresis ensures high noise rejection. In addition, the receiver fail-safe feature guarantees a logic high when the inputs are open or shorted together.

THVD24x0 devices are available in small VSSOP and VSON packages for space-constrained applications. These devices are characterized over ambient free-air temperatures from –40°C to 125°C.

filter

尋找其它 RS-485 & RS-422 收發器

下載觀看有字幕稿的影片影片

您可能會感興趣的類似產品

open-in-new

比較替代產品

針腳對針腳的功能與所比較的裝置相同。

THVD1439

現行

具整合式 4-kV IEC 突波和 IEC ESD/EFT 防護的 3.3-V 至 5-V、250-Kbps、RS-485 收發器 With integrated surge protection

功能相同，但針腳輸出與所比較的裝置不同。

THVD2410V

現行

具彈性 IO 和 70-V 匯流排故障保護功能的 3-V 至 5.5-V、1-Mbps 半雙工 RS-485 收發器 With 1.65-V to VCC IO support

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 4

重要文件	類型	標題	格式選項
*	資料表	THVD24x0 ±70-V Fault-Protected 3.3-V to 5-V RS-485 Transceivers With IEC ESD datasheet (Rev. B)	PDF \| HTML	2021/10/25
	應用說明	Mitigating UART Receiver Glitches While Switching Modes on RS-485 Transceivers	PDF \| HTML	2024/12/11
	應用說明	RS-485: High-Fault Protection, Wide-Input Common Mode, and Deglitch Function	PDF \| HTML	2022/4/20
	功能安全資訊	THVD24x0 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA	PDF \| HTML	2020/10/28

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

RS485-HF-DPLX-EVM — RS-485 半雙工評估模組

RS-485 半雙工評估模組 (EVM) 可協助設計師評估裝置性能，其支援使用 SN65HVD1x、SN65HVD2x、SN65HVD7x、SN65HVD8x 和 SN65HVD96 半雙工收發器之一快速開發與分析資料傳輸系統。EVM 板出貨時並未將 RS-485 裝置焊接至電路板上。使用者可索取樣品或購買任何 TI RS-485 半雙工裝置，以進行評估。如需相容裝置的完整清單，請參閱 EVM 使用指南。

使用指南: PDF | HTML

支援產品和硬體

有庫存

限制：

登入以進行訂購

lock

登入以檢視庫存

??asset.out-of-stock-ti_zh_TW??

無法提供

封裝	針腳	CAD 符號、佔位空間與 3D 模型
VSON (DRB)	8	Ultra Librarian
SOIC (D)	8	Ultra Librarian
VSSOP (DGK)	8	Ultra Librarian

適用 TI 的評估品項標準條款與條件。

THVD2410

具有 IEC ESD 的 ±70-V 故障保護 3.3-V 至 5-V RS-485 收發器

THVD2410

產品詳細資料

您可能會感興趣的類似產品

針腳對針腳的功能與所比較的裝置相同。

功能相同，但針腳輸出與所比較的裝置不同。

技術文件

設計與開發

RS485-HF-DPLX-EVM — RS-485 半雙工評估模組

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

影片系列

影片