產品詳細資料

CPU Arm Cortex-M4F Frequency (MHz) 120 Flash memory (kByte) 1024 RAM (kByte) 256 ADC type 1 12-bit SAR Features 8-/16-/32-bit EPI, Hardware encrpytion (AES/DES/SHA/MD5), Hibernation with calendar mode UART 8 CAN (#) 2 PWM (Ch) 8 Security Cryptographic acceleration, Secure communication, Secure debug SPI 4 USB USB 2.0 Hardware accelerators Floating point unit Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface 10/100 Ethernet MAC+PHY, CAN, I2C, SSI/SPI, UART, USB 2.0 OTG/host/device Nonvolatile memory (kByte) 1024 Number of GPIOs 90 Number of I2Cs 10
CPU Arm Cortex-M4F Frequency (MHz) 120 Flash memory (kByte) 1024 RAM (kByte) 256 ADC type 1 12-bit SAR Features 8-/16-/32-bit EPI, Hardware encrpytion (AES/DES/SHA/MD5), Hibernation with calendar mode UART 8 CAN (#) 2 PWM (Ch) 8 Security Cryptographic acceleration, Secure communication, Secure debug SPI 4 USB USB 2.0 Hardware accelerators Floating point unit Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface 10/100 Ethernet MAC+PHY, CAN, I2C, SSI/SPI, UART, USB 2.0 OTG/host/device Nonvolatile memory (kByte) 1024 Number of GPIOs 90 Number of I2Cs 10
TQFP (PDT) 128 256 mm² (16 mm × 16 mm)
  • Performance
    • ARM® Cortex™-M4F processor core
    • 120-MHz operation; 150 DMIPS performance
    • 1024 KB Flash memory
    • 256 KB single-cycle System SRAM
    • 6KB of EEPROM
    • Internal ROM loaded with TivaWare™ for C Series software
    • 8-/16-/32- bit dedicated External Peripheral Interface (EPI) for peripherals and memory
  • Security
    • Cyclical Redundancy Check (CRC) hardware with 16-/32-bit Hash function that supports four CRC forms
    • Advanced Encryption Standard (AES) hardware-accelerated data encryption and decryption based on 128-, 192-, and 256-bit keys
    • Data Encryption Standard (DES) block cipher implementation with 168-bit effective key length
    • Hardware Accelerated Hash (SHA/MD5) advanced hash engine that supports SHA-1, SHA-2 or MD5 Hash computation
    • Support for four tamper inputs and configurable tamper event response
  • Communication Interfaces
    • Eight Universal Asynchronous Receivers/Transmitters (UARTs)
    • Four Quad Synchronous Serial Interface (QSSI) modules with Bi-, Quad- and advanced SSI support
    • Ten Inter-Integrated Circuit (I2C) modules with four transmission speeds including high-speed mode
    • Two Controller Area Network (CAN) 2.0 A/B controllers
    • 10/100 Ethernet MAC
    • Ethernet PHY with IEEE 1588 PTP hardware support
    • Universal Serial Bus (USB) 2.0 OTG/Host/Device with ULPI interface option and Link Power Management (LPM) support
  • System Integration
    • ARM® PrimeCell® 32-channel configurable Micro Direct Memory Access (µDMA) controller
    • Eight 16/32-bit General-Purpose Timer (GPTM) blocks
    • Two watchdog timers
    • Low-power battery-backed Hibernation module
    • 15 physical General-Purpose Input/Output (GPIO) blocks
  • Advanced Motion Control
    • One Pulse Width Modulator (PWM) module, with four PWM generator blocks and a control block, for a total of 8 PWM outputs
    • One Quadrature Encoder Interface (QEI) module
  • Analog Support
    • Two 12-bit Analog-to-Digital Converter (ADC) modules, each with a maximum sample rate of one million samples/second
    • Three independent integrated analog comparators
    • 16 digital comparators
  • One JTAG module with integrated ARM Serial Wire Debug (SWD)
  • 128-pin TQFP package
  • Operating Range (Ambient)
    • Industrial (-40°C to 85°C) temperature range
    • Extended (-40°C to 105°C) temperature range
  • Performance
    • ARM® Cortex™-M4F processor core
    • 120-MHz operation; 150 DMIPS performance
    • 1024 KB Flash memory
    • 256 KB single-cycle System SRAM
    • 6KB of EEPROM
    • Internal ROM loaded with TivaWare™ for C Series software
    • 8-/16-/32- bit dedicated External Peripheral Interface (EPI) for peripherals and memory
  • Security
    • Cyclical Redundancy Check (CRC) hardware with 16-/32-bit Hash function that supports four CRC forms
    • Advanced Encryption Standard (AES) hardware-accelerated data encryption and decryption based on 128-, 192-, and 256-bit keys
    • Data Encryption Standard (DES) block cipher implementation with 168-bit effective key length
    • Hardware Accelerated Hash (SHA/MD5) advanced hash engine that supports SHA-1, SHA-2 or MD5 Hash computation
    • Support for four tamper inputs and configurable tamper event response
  • Communication Interfaces
    • Eight Universal Asynchronous Receivers/Transmitters (UARTs)
    • Four Quad Synchronous Serial Interface (QSSI) modules with Bi-, Quad- and advanced SSI support
    • Ten Inter-Integrated Circuit (I2C) modules with four transmission speeds including high-speed mode
    • Two Controller Area Network (CAN) 2.0 A/B controllers
    • 10/100 Ethernet MAC
    • Ethernet PHY with IEEE 1588 PTP hardware support
    • Universal Serial Bus (USB) 2.0 OTG/Host/Device with ULPI interface option and Link Power Management (LPM) support
  • System Integration
    • ARM® PrimeCell® 32-channel configurable Micro Direct Memory Access (µDMA) controller
    • Eight 16/32-bit General-Purpose Timer (GPTM) blocks
    • Two watchdog timers
    • Low-power battery-backed Hibernation module
    • 15 physical General-Purpose Input/Output (GPIO) blocks
  • Advanced Motion Control
    • One Pulse Width Modulator (PWM) module, with four PWM generator blocks and a control block, for a total of 8 PWM outputs
    • One Quadrature Encoder Interface (QEI) module
  • Analog Support
    • Two 12-bit Analog-to-Digital Converter (ADC) modules, each with a maximum sample rate of one million samples/second
    • Three independent integrated analog comparators
    • 16 digital comparators
  • One JTAG module with integrated ARM Serial Wire Debug (SWD)
  • 128-pin TQFP package
  • Operating Range (Ambient)
    • Industrial (-40°C to 85°C) temperature range
    • Extended (-40°C to 105°C) temperature range

Tiva™ C Series microcontrollers integrate a large variety of rich communication features to enable a new class of highly connected designs with the ability to allow critical, real-time control between performance and power. The microcontrollers feature integrated communication peripherals along with other high-performance analog and digital functions to offer a strong foundation for many different target uses, spanning from human machine interface to networked system management controllers.

In addition, Tiva™ C Series microcontrollers offer the advantages of ARM's widely available development tools, System-on-Chip (SoC) infrastructure, and a large user community. Additionally, these microcontrollers use ARM's Thumb®-compatible Thumb-2 instruction set to reduce memory requirements and, thereby, cost. Finally, the TM4C129ENCPDT microcontroller is code-compatible to all members of the extensive Tiva™ C Series, providing flexibility to fit precise needs.

Texas Instruments offers a complete solution to get to market quickly, with evaluation and development boards, white papers and application notes, an easy-to-use peripheral driver library, and a strong support, sales, and distributor network.

Tiva™ C Series microcontrollers integrate a large variety of rich communication features to enable a new class of highly connected designs with the ability to allow critical, real-time control between performance and power. The microcontrollers feature integrated communication peripherals along with other high-performance analog and digital functions to offer a strong foundation for many different target uses, spanning from human machine interface to networked system management controllers.

In addition, Tiva™ C Series microcontrollers offer the advantages of ARM's widely available development tools, System-on-Chip (SoC) infrastructure, and a large user community. Additionally, these microcontrollers use ARM's Thumb®-compatible Thumb-2 instruction set to reduce memory requirements and, thereby, cost. Finally, the TM4C129ENCPDT microcontroller is code-compatible to all members of the extensive Tiva™ C Series, providing flexibility to fit precise needs.

Texas Instruments offers a complete solution to get to market quickly, with evaluation and development boards, white papers and application notes, an easy-to-use peripheral driver library, and a strong support, sales, and distributor network.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 52
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 Tiva C Series TM4C129ENCPDT Microcontroller Data Sheet datasheet (Rev. B) 2014/6/19
* 勘誤表 Corrections to Tiva™ TM4C123x/TM4C129x Data Sheets Manual Update Sheet 2019/5/17
* 勘誤表 Tiva C Series TM4C129x Microcontrollers Silicon Revisions 1, 2, & 3 Errata (Rev. G) 2017/3/29
* 勘誤表 ARM® Cortex™-M4F Errata (v3) 2011/12/15
應用說明 Implementing Enumeration for 1-Wire® Protocol with TMP1826 and TM4C129x Microcontrollers (Rev. E) PDF | HTML 2025/1/21
應用說明 Developing Advanced Applications With FreeRTOS on TM4C MCUs PDF | HTML 2023/3/27
應用說明 Developing Common Applications With FreeRTOS on TM4C MCUs PDF | HTML 2022/10/28
使用指南 Getting Started with TivaWare™ for C Series (Rev. A) PDF | HTML 2022/8/25
應用說明 Developing Basic Applications With FreeRTOS on TM4C MCUs PDF | HTML 2022/4/19
應用說明 Shared Key Boot Loader for TM4C129 Devices With AES Hardware Encryption PDF | HTML 2022/1/31
應用說明 Digital Audio Playback on TM4C12x MCUs PDF | HTML 2021/12/16
應用說明 Developing LCD Applications for TM4C12x MCU PDF | HTML 2021/8/19
應用說明 TM4C129x Ethernet Applications for Socket-Based TI-RTOS NDK PDF | HTML 2021/4/29
應用說明 TM4C129x Ethernet Applications for Lightweight IP (lwIP) PDF | HTML 2021/2/24
應用說明 High Endurance EEPROM Emulation Driver for TM4C129x Devices PDF | HTML 2021/1/11
選擇指南 TM4C Microcontrollers Product Selection Guide (Rev. E) 2020/12/9
應用說明 Using the Edde Flex CAN Controller on the EK-TM4C1294XL LaunchPad PDF | HTML 2020/8/6
使用指南 TivaWare™ Graphics Library for C Series User's Guide (Rev. E) 2020/5/14
使用指南 TivaWare™ Peripheral Driver Library for C Series User's Guide (Rev. E) 2020/5/14
使用指南 TivaWare™ Sensor Library for C Series User's Guide (Rev. E) 2020/5/14
使用指南 TivaWare™ USB Library for C Series User's Guide (Rev. E) 2020/5/14
使用指南 TivaWare™ Bootloader for C Series User's Guide (Rev. E) 2019/12/19
使用指南 TivaWare™ for C Series Release Notes SW-TM4C-RLN-2.2.0.295 (Rev. F) 2019/12/5
應用說明 Using TM4C12x Devices Over JTAG Interface 2016/8/18
應用說明 Implementing OPUS Voice Code for TM4C129x Device 2016/6/20
使用指南 TI-RTOS 2.20 User's Guide (Rev. M) 2016/6/17
應用說明 Implementation of Programmer for Serial Bootloaders on TM4C12x Microcontroller (Rev. A) 2016/4/21
設計指南 Sub-1 GHz-Enabled IoT Node on High-Performance Microcontrollers Design Guide 2016/3/10
應用說明 Using the CMSIS DSP Library in Code Composer Studio for TM4C MCUs (Rev. G) PDF | HTML 2015/10/7
應用說明 Using Feature Set of I2C on TM4C129x Microcontrollers 2015/7/28
應用說明 Serial to Ethernet Converter for TM4C129x Microcontrollers Using RTOS PDF | HTML 2015/3/31
白皮書 Building a Gateway to the Internet of Things 2014/12/15
白皮書 Reducing the Cost, Power and Size of Connectivity in IoT Designs 2014/7/24
使用指南 Tiva C Series TM4C129x ROM User's Guide (Rev. A) 2014/5/14
白皮書 Turning the Cloud into a Rainmaker (Rev. A) 2014/4/25
更多文件說明 Tiva C Series TM4C129ENCPDT Micocontroller Pin List (Rev. A) 2013/12/17
應用說明 Differences Between Stellaris Tempest & Firestorm-Class MCUs and Tiva TM4C129x 2013/10/22
應用說明 Differences Between Tiva C Series TM4C Microcontrollers 2013/10/22
應用說明 Transitioning Designs From Stellaris LM3S Microcontrollers to Tiva C Series MCUs (Rev. A) 2013/10/22
應用說明 System Design Guidelines for the TM4C123x Family of Tiva C Series MCUs 2013/7/31
應用說明 System Design Guidelines for the TM4C129x Family of Tiva C Series MCUs 2013/7/16
應用說明 Stellaris® Graphics Library Display Drivers (AN01287) (Rev. A) 2013/7/9
應用說明 Stellaris Application Update Using Stellaris USB DFU Class (AN01273) (Rev. A) 2013/7/8
應用說明 Dual-SPI Emulating I²S on Tiva™ C Series TM4C123x MCUs (Rev. B) 2013/6/12
應用說明 Migrating Software Projects from StellarisWare to TivaWare for C Series Software (Rev. A) 2013/5/1
白皮書 An Introduction to the Tiva C Series Platform of Microcontrollers 2013/4/12
應用說明 Powering Cortex-M4 MCUs Using the High Efficiency DCS-Control Topology 2013/2/3
應用說明 ADC Oversampling Techniques for Stellaris Microcontrollers (AN01239) (Rev. A) 2013/1/8
應用說明 Using SYS/BIOS with Stellaris® ARM® Cortex™-M3 Microcontrollers (Rev. A) 2012/11/19
應用說明 Using Execute, Write/Erase Flash Protection on Stellaris MCUs Using CCS (Rev. A) 2012/8/15
應用說明 Diagnosing Software Faults in Stellaris® Microcontrollers 2012/6/4
應用說明 Software UART for Stellaris Microcontrollers (AN01270) 2009/7/7

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

EK-TM4C1294XL — 基於 ARM® Cortex®-M4F 的 MCU TM4C1294 Connected LaunchPad™ 評估套件

TM4C1294 Connected LaunchPad 評估套件是適用於 Arm® Cortex-M4F 架構微控制器 (MCU) 的低成本開發平台。Connected LaunchPad 設計重點在於 TM4C1294NCPDT MCU,其晶片內建 10/100 Ethernet 媒體存取控制 (MAC) 與實體層 (PHY)、USB 2.0、休眠模組、動作控制脈衝寬度調變,以及多種同步序列連線。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

EK-TM4C129EXL — 適用於物聯網應用的 ARM® Cortex®-M4F 架構 MCU TM4C129E Crypto Connected LaunchPad™

由具備硬體加密加速器的 MCU 提供動力,Crypto Connected LaunchPad 可讓您開發從安全雲端連線、建築/工廠自動化與智慧電網到工業控制的高性能、具備資料保護的連網 IoT 應用。

TM4C129E Crypto Connected LaunchPad 評估套件是適用於 ARM® Cortex-M4 架構微控制器的低成本平台。套件設計重點在於 TM4C129ENCPDT MCU,晶片內建加密加速硬體、10/100 乙太網路 MAC 與 PHY、USB 2.0、休眠模組、動作控制脈衝寬度調變與多種同步序列連線。

加密連線 LaunchPad 的開箱即用示範 (...)

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
偵錯探測器

TMDSEMU200-U — XDS200 USB 偵錯探測器

XDS200 是為 TI 嵌入式裝置偵錯的偵錯探測器(模擬器)。對於大多數裝置,建議使用較新、成本較低的 XDS110 (www.ti.com/tool/TMDSEMU110-U)。XDS200 支援單一 Pod 中廣泛的標準(IEEE1149.1、IEEE1149.7、SWD)。所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。

XDS200 透過 TI 20 接腳連接器(配備適用 TI 14 接腳、Arm Cortex® 10 接腳和 Arm 20 接腳的多重轉接器)連接到目標電路板,並透過 USB2.0 高速 (...)

支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
偵錯探測器

TMDSEMU560V2STM-U — XDS560™ 軟體 v2 系統追蹤 USB 偵錯探測器

XDS560v2 是 XDS560™ 系列偵錯探測器中性能最高的,且同時支援傳統 JTAG 標準 (IEEE1149.1) 與 cJTAG (IEEE1149.7)。  請注意,其不支援序列線偵錯 (SWD)。

所有 XDS 偵錯探測器均在所有配備嵌入式追蹤緩衝器 (ETB) 的 ARM 與 DSP 處理器中支援核心與系統追蹤。  對於針腳上的追蹤,則需要 XDS560v2 PRO TRACE

XDS560v2 透過 MIPI HSPT 60 針腳接頭 (具有用於 TI 14 針腳、TI 20 針腳和 ARM 20 針腳的多轉接器) 連接到目標電路板,並透過 USB2.0 高速 (...)

支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
偵錯探測器

TMDSEMU560V2STM-UE — XDS560v2 System Trace USB 與乙太網路偵錯探測器

The XDS560v2 is the highest performance of the XDS560™ family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7). Note that it does not support serial wire debug (SWD).

All XDS debug probes support Core and System Trace in all ARM and DSP processors (...)

支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
偵錯探測器

TSK-3P-BLUEBOX — TASKING BlueBox hardware debugger

TASKING’s Debug, Trace, and Test tools offer comprehensive solutions for efficient debugging, tracing, and testing of TI's embedded systems. The scalable TASKING BlueBox debuggers allow users to easily flash, debug, and test across TI's portfolio. Development on TI hardware is made even easier with (...)

支援產品和硬體
軟體開發套件 (SDK)

SW-TM4C — TivaWare for C Series Software (Complete)

The TivaWare™ for C Series software development kit (SDK) provides all the components necessary for engineers to evaluate and develop applications for the Texas Instruments TM4C Arm® Cortex®-M4F device family. The TivaWare SDK allows developers to get started quickly, leverage (...)
支援產品和硬體
IDE、配置、編譯器或偵錯程式

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

ENERGIA — Energia

Energia is an open source & community-driven integrated development environment (IDE) & software framework. Based on the Wiring framework, Energia provides an intuitive coding environment as well as a robust framework of easy-to-use functional APIs & libraries for programming a (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

支援產品和硬體
軟體程式設計工具

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分,是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄,以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面,並可在桌面上或雲端中執行。

UniFlash 可從 CCStudio 開發人員區上的雲端執行,或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。

請注意,mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。

支援產品和硬體
支援軟體

SPMC023 — LLDP Software

支援產品和硬體
模擬型號

TM4C129ENCPDT 128-TQFP BSDL Model

SPMM817.ZIP (4 KB) - BSDL 模型
支援產品和硬體
模擬型號

TM4C129ENCPDT 128-TQFP IBIS Model

SPMM837.ZIP (894 KB) - IBIS 模型
支援產品和硬體

許多 TI 參考設計包含 TM4C129ENCPDT

使用我們的參考設計選擇工具,以檢視並找出最適合您的應用和參數的設計。

封裝 針腳 CAD 符號、佔位空間與 3D 模型
TQFP (PDT) 128 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片系列

觀看所有影片

影片