首頁 音訊 音訊放大器 喇叭放大器
首頁
音訊
音訊放大器
喇叭放大器

TPA3138D2

現行

無電感器的 10W 立體聲道、18.5W 單聲道、3.5 至 14.4V 類比輸入 D 類音訊放大器

立即訂購
產品規格表

TPA3138D2

現行
產品規格表 立即訂購

產品詳細資料

Audio input type Analog Input Architecture Class-D Speaker channels (max) Stereo Rating Catalog Power stage supply (max) (V) 14.4 Power stage supply (min) (V) 3.5 Load (min) (Ω) 3.2 Output power (W) 10 SNR (dB) 102 THD + N at 1 kHz (%) 0.04 Iq (typ) (mA) 20 Control interface Hardware Closed/open loop Closed Analog supply (min) (V) 3.5 Analog supply voltage (max) (V) 14.4 PSRR (dB) 70 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Speaker channels (max) Stereo Rating Catalog Power stage supply (max) (V) 14.4 Power stage supply (min) (V) 3.5 Load (min) (Ω) 3.2 Output power (W) 10 SNR (dB) 102 THD + N at 1 kHz (%) 0.04 Iq (typ) (mA) 20 Control interface Hardware Closed/open loop Closed Analog supply (min) (V) 3.5 Analog supply voltage (max) (V) 14.4 PSRR (dB) 70 Operating temperature range (°C) -40 to 85
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4
  • Wide Supply Range 3.5-V to 14.4-V
    • 2 × 10 W into 6-Ω, 1% THD+N, 12-V Supply
    • 1 x 18.5 W into 4-Ω, 10% THD+N, 12-V Supply
    • THD+N : 0.04% at 1 W, 1 kHz input, 6-Ω
  • Longer Battery Life for Portable Applications:
    • 20-mA (12-V) Idle Current in 1SPW Mode
    • >90% Class-D Efficiency
  • Reduced Solution Size and Cost:
    • Inductor-Free Operation
    • EN55013 and EN55022 EMC Compliant When No Inductors are Used
    • No External Heatsink Required
  • Flexible Audio Solution:
    • Single-ended or Differential Analog Inputs
    • Selectable Gain: 20 dB and 26 dB
    • Pop and Click-Free Startup
  • Integrated Protections and Auto Recovery:
    • Pin-to-pin, Pin-to-Ground, and Pin-to-Power Short Circuit Protection
    • Thermal Protection, Undervoltage Protection, and Overvoltage Protection
    • Power Limiter and DC Speaker Protection
  • Pin-to-Pin Compatible with TPA3110D2, TPA3136D2 and TPA3136AD2
  • Wide Supply Range 3.5-V to 14.4-V
    • 2 × 10 W into 6-Ω, 1% THD+N, 12-V Supply
    • 1 x 18.5 W into 4-Ω, 10% THD+N, 12-V Supply
    • THD+N : 0.04% at 1 W, 1 kHz input, 6-Ω
  • Longer Battery Life for Portable Applications:
    • 20-mA (12-V) Idle Current in 1SPW Mode
    • >90% Class-D Efficiency
  • Reduced Solution Size and Cost:
    • Inductor-Free Operation
    • EN55013 and EN55022 EMC Compliant When No Inductors are Used
    • No External Heatsink Required
  • Flexible Audio Solution:
    • Single-ended or Differential Analog Inputs
    • Selectable Gain: 20 dB and 26 dB
    • Pop and Click-Free Startup
  • Integrated Protections and Auto Recovery:
    • Pin-to-pin, Pin-to-Ground, and Pin-to-Power Short Circuit Protection
    • Thermal Protection, Undervoltage Protection, and Overvoltage Protection
    • Power Limiter and DC Speaker Protection
  • Pin-to-Pin Compatible with TPA3110D2, TPA3136D2 and TPA3136AD2

The TPA3138D2 is a 10-W/ch, high-efficiency, low-idle-current Class-D stereo audio amplifier. It can drive stereo speakers with a load as low as 3.2-Ω. In the 1SPW mode, it consumes a low idle current of only 21-mA (12-V) and can operate down to 3.5-V, allowing for longer audio play and improved thermal performance in bluetooth speakers, battery-powered appliances and other power-sensitive applications.

Advanced EMI Suppression with Spread Spectrum Control enables the use of inexpensive ferrite bead filters while meeting EMC requirements for system cost reduction.

To further simplify the design, the TPA3138D2 integrates essential protection features including undervoltage, overvoltage, power limit, short circuit, overtemperature, as well as DC speaker protection. All of these protections come with automatic recovery.

Customers can leverage every TPA3138D2 feature in existing designs as it is fully pin-to-pin compatible to TI’s TPA3110D2, TPA3136D2 and TPA3136AD2.

The TPA3138D2 is a 10-W/ch, high-efficiency, low-idle-current Class-D stereo audio amplifier. It can drive stereo speakers with a load as low as 3.2-Ω. In the 1SPW mode, it consumes a low idle current of only 21-mA (12-V) and can operate down to 3.5-V, allowing for longer audio play and improved thermal performance in bluetooth speakers, battery-powered appliances and other power-sensitive applications.

Advanced EMI Suppression with Spread Spectrum Control enables the use of inexpensive ferrite bead filters while meeting EMC requirements for system cost reduction.

To further simplify the design, the TPA3138D2 integrates essential protection features including undervoltage, overvoltage, power limit, short circuit, overtemperature, as well as DC speaker protection. All of these protections come with automatic recovery.

Customers can leverage every TPA3138D2 feature in existing designs as it is fully pin-to-pin compatible to TI’s TPA3110D2, TPA3136D2 and TPA3136AD2.
open-in-new 尋找其它 喇叭放大器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的產品不同
TPA3139D2 現行 10W 3.5V 至 14.4V 無電感器立體聲道 QFN 類比輸入 D 類音訊放大器 TPA3139D2 offers similar functionality in a VQFN package.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet TPA3138D2 10-W, 3.5-V to 14.4-V, Inductor Free, Stereo Class-D Speaker Amplifier datasheet (Rev. A) PDF | HTML 2018年 6月 8日
Application note TPA3136D2 Design Considerations for EMC (Rev. A) 2018年 7月 27日
Application brief TPA3138 Transition Guide – from TPA3110, TPA3113 2018年 7月 6日
EVM User's guide TPA3138D2 Evaluation Module User's Guide 2017年 12月 5日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 引腳 下載
HTSSOP (PWP) 28 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片