首頁 介面 特定應用埠保護 IC
首頁
介面
特定應用埠保護 IC

TPD3S713-Q1

現行

車用 USB 0.05-A to 0.6-A 可調整電流限制及 VBUS/D+/D- 短路至 VBATT 防護

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
引腳對引腳的功能與所比較的產品相同
TPD3S713A-Q1 現行 車用 USB 0.05-A 至 0.6-A 可調整電流限制及 VBUS/D+/D- 短路至 VBATT 防護 Pin-to-pin product with specific fault actions. 

TPD3S713-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of switches 1 IO capacitance (typ) (pF) 10.9 IEC 61000-4-2 contact (±V) 8000 IEC 61000-4-2 air-gap (±V) 15000 Features Current limit, Short-to-battery protection Bi-/uni-directional Unidirectional Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Interface type USB 2.0
Number of switches 1 IO capacitance (typ) (pF) 10.9 IEC 61000-4-2 contact (±V) 8000 IEC 61000-4-2 air-gap (±V) 15000 Features Current limit, Short-to-battery protection Bi-/uni-directional Unidirectional Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Interface type USB 2.0
WQFN (RVC) 20 12 mm² 4 x 3
  • AEC-Q100 qualified for automotive applications:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level H2
    • Device CDM ESD classification level C5
  • Short-to-battery (up to 18 V) and short-to-ground protection on V BUS pin
  • Short-to-battery (up to 18 V) and short-to-V BUS protection on DM_IN, DP_IN pins
  • DP_IN, DM_IN and V BUS IEC 61000-4-2 rated
    • ±8-kV contact and ±15-kV air discharge
  • DP_IN, DM_IN and V BUS ISO 10605 (330 pF, 330 Ω) rated
    • ±8-kV contact and ±15-kV air discharge
  • High speed data switches (1230-MHz BW)
  • 4.5-V to 5.5-V input operating range
  • 50-mA to 600-mA adjustable current limit (±13.5% at 200 mA)
  • Integrated 73-mΩ (typical) high-side MOSFET
  • 500-mA maximum continuous output current
  • V BUS cable compensation
  • 20-pin QFN (3 mm × 4 mm) package
  • AEC-Q100 qualified for automotive applications:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level H2
    • Device CDM ESD classification level C5
  • Short-to-battery (up to 18 V) and short-to-ground protection on V BUS pin
  • Short-to-battery (up to 18 V) and short-to-V BUS protection on DM_IN, DP_IN pins
  • DP_IN, DM_IN and V BUS IEC 61000-4-2 rated
    • ±8-kV contact and ±15-kV air discharge
  • DP_IN, DM_IN and V BUS ISO 10605 (330 pF, 330 Ω) rated
    • ±8-kV contact and ±15-kV air discharge
  • High speed data switches (1230-MHz BW)
  • 4.5-V to 5.5-V input operating range
  • 50-mA to 600-mA adjustable current limit (±13.5% at 200 mA)
  • Integrated 73-mΩ (typical) high-side MOSFET
  • 500-mA maximum continuous output current
  • V BUS cable compensation
  • 20-pin QFN (3 mm × 4 mm) package

The TPD3S713x-Q1 is a single-chip solution for short-to-battery, short-circuit, and ESD protection for high-speed data and power lines in automotive USB hub, head unit, telematics, and media interface applications. The integrated data switches provide best-in-class bandwidth for minimal signal degradation during USB short-to-battery events. The high bandwidth of 1.2 GHz allows for a clean USB2.0 high-speed 480-Mbps eye diagram with the long captive cables that are common in the automotive USB environment.

The short-to-battery protection isolates the internal system circuits from any overvoltage conditions at the V BUS, DP_IN, and DM_IN pins. On these pins, the TPD3S713x-Q1 can handle overvoltages up to 18 V for hot plug and DC events and shut off the internal switches to the upstream transceiver from harmful voltage and current spikes.

The V BUS pin also provides an adjustable current limited load switch from 50 mA to 600 mA, which provides flexibility and also saves system power budget when the port requires only several tens of milliampere.

The TPD3S713x-Q1 device has a current-sense output that is able to control an upstream supply, which allows it to maintain 5 V at the remote USB port connected after a long USB cables.

The TPD3S713x-Q1 is a single-chip solution for short-to-battery, short-circuit, and ESD protection for high-speed data and power lines in automotive USB hub, head unit, telematics, and media interface applications. The integrated data switches provide best-in-class bandwidth for minimal signal degradation during USB short-to-battery events. The high bandwidth of 1.2 GHz allows for a clean USB2.0 high-speed 480-Mbps eye diagram with the long captive cables that are common in the automotive USB environment.

The short-to-battery protection isolates the internal system circuits from any overvoltage conditions at the V BUS, DP_IN, and DM_IN pins. On these pins, the TPD3S713x-Q1 can handle overvoltages up to 18 V for hot plug and DC events and shut off the internal switches to the upstream transceiver from harmful voltage and current spikes.

The V BUS pin also provides an adjustable current limited load switch from 50 mA to 600 mA, which provides flexibility and also saves system power budget when the port requires only several tens of milliampere.

The TPD3S713x-Q1 device has a current-sense output that is able to control an upstream supply, which allows it to maintain 5 V at the remote USB port connected after a long USB cables.
open-in-new 尋找其它 特定應用埠保護 IC
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet TPD3S713-Q1 and TPD3S713A-Q1 Automotive USB 2.0 Interface Protection With Adjustable Current Limit and Short-to-VBATT Protection datasheet (Rev. B) PDF | HTML 2023年 4月 19日
Functional safety information TPD3S713-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. A) PDF | HTML 2023年 10月 18日
Certificate TPD3S713Q1EVM-103 EU RoHS Declaration of Conformity (DoC) 2020年 9月 23日
EVM User's guide TPD3S713Q1EVM-103 User's Guide 2019年 12月 2日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPD3S713Q1EVM-103 — 具有可調整電流限制的 TPD3S713-Q1 車用 USB 2.0 介面保護評估模組

The TPD3S713Q1EVM-103 are evaluation modules (EVM) for The TPD3S713-Q1 which is a single-chip solution for shortto-Battery, short-circuit, and ESD protection for high speed data and power lines in automotive USB hub, head unit applications.
使用指南: PDF
TI.com 無法提供
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
檢視選項
封裝 引腳 下載
WQFN (RVC) 20 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片