TPD4S014
- Input Voltage Protection at VBUS up to 28 V
- Low Ron nFET Switch
- Supports > 2 A Charging Current
- ESD Performance D+/D-/ID/VBUS
Pins:
- ±15-kV Contact Discharge (IEC 61000-4-2)
- ±15-kV Air Gap Discharge (IEC 61000-4-2)
- Overvoltage and Undervoltage Lockout Features
- Low Capacitance TVS ESD Clamp for USB2.0 High Speed Data Rate
- Internal 17 ms Startup Delay
- Integrated Input Enable and Status Output Signal
- Thermal Shutdown Feature
- Space Saving SON Package (2 mm × 2 mm)
The TPD4S014 is a single-chip solution for USB charger port protection. This device offers low capacitance transient voltage suppressor (TVS) electrostatic discharge (ESD) clamps for the D+, D-, and standard capacitance for the ID pin. On the VBUS pin, this device provides overvoltage protection (OVP) up to 28 V DC. The overvoltage lockout feature ensures that if there is a fault condition at the VBUS line, the TPD4S014 is able to isolate the VBUS line to protect the internal circuitry from damage. There is a 17-ms turn-on delay after VBUS rises above the undervoltage lockout (UVLO) threshold in order to let the voltage stabilize before turning the nFET on. This function acts as a de-glitch and prevents unnecessary switching if there is any ringing on the line during connection.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TPD4S014 USB Charger Port Protection Including ESD Protection for All Lines and Overvoltage Protection on VBUS datasheet (Rev. G) | PDF | HTML | 2015/12/31 | ||
| 使用指南 | Reading and Understanding an ESD Protection Data Sheet (Rev. A) | PDF | HTML | 2023/9/19 | |||
| 應用說明 | ESD Protection Layout Guide (Rev. A) | PDF | HTML | 2022/4/7 | |||
| 選擇指南 | ESD by Interface Selection Guide (Rev. A) | 2017/6/26 | ||||
| 白皮書 | Designing USB for short-to-battery tolerance in automotive environments | 2016/2/10 | ||||
| 類比設計期刊 | Design Considerations for System-Level ESD Circuit Protection | 2012/9/25 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPD4S014EVM — TPD4S014EVM： 包含 ESD 防護且適用於 USB 充電器埠的完整保護解決方案
The TPD4S014 is a single-chip solution for USB charger port protection. This device offers low capacitance TVS type ESD clamps for the D+, D- and standard Capacitance for the ID pin. On the VBUS pin, this device can handle over-voltage protection up to 28V. The over voltage lock-out feature ensures (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WSON (DSQ) | 10 | Ultra Librarian |