TPS2547

現行

具負載偵測功能的 USB 充電埠控制器與 3A 電源開關

立即訂購

產品規格表

document-pdfAcrobat TPS2547 USB Charging Port Controller and 3-Amp Power Switch With Load Detection datasheet (Rev. A) (英文) PDF | HTML

TPS2547

現行

產品規格表

立即訂購

產品詳細資料

Product type

Charge port controller

Rating

Catalog

Continuous current (max) (A)

3

Current limit (A)

0.2 to 3.0

Number of switches

1

Enable

Active High

Vin (max) (V)

5.5

Vin (min) (V)

4.5

Operating temperature range (°C)

-40 to 115

Current limit accuracy at 1 A

0.1

Product type

Charge port controller

Rating

Catalog

Continuous current (max) (A)

3

Current limit (A)

0.2 to 3.0

Number of switches

1

Enable

Active High

Vin (max) (V)

5.5

Vin (min) (V)

4.5

Operating temperature range (°C)

-40 to 115

Current limit accuracy at 1 A

0.1

WQFN (RTE)

16

9 mm² 3 x 3

D+/D– CDP/DCP Modes per USB BC 1.2
D+/D– Shorted Mode per Chinese Telecommunication Industry Standard YD/T
1591-2009
Supports Non-BC1.2 Charging Modes by Automatic Selection:
- D+/D– Divider Modes 2 V/2.7 V and 2.7 V/2 V
- D+/D– 1.2-V Mode
Supports Sleep-Mode Charging and Mouse/Keyboard Wakeup
Load Detection for Power Supply Control in S4/S5 Charging and Port Power Management in All Charge Modes
USB 2.0 and 3.0 Compatible
Integrated 73-mΩ (Typical) High-Side MOSFET
3-A Programmable I_LIMIT Supports 15 Watt Loads
Operating Range: 4.5 V to 5.5 V
2 µA/270 µA I_Q When Disabled/Enabled
Drop-In, BOM Compatible with TPS2543/46
16-Pin WQFN (3.00 mm × 3.00 mm) Package
8-kV ESD Rating on DM/DP Pins
UL Recognized File No. E169910 and CB Certified - Pending

D+/D– CDP/DCP Modes per USB BC 1.2
D+/D– Shorted Mode per Chinese Telecommunication Industry Standard YD/T
1591-2009
Supports Non-BC1.2 Charging Modes by Automatic Selection:
- D+/D– Divider Modes 2 V/2.7 V and 2.7 V/2 V
- D+/D– 1.2-V Mode
Supports Sleep-Mode Charging and Mouse/Keyboard Wakeup
Load Detection for Power Supply Control in S4/S5 Charging and Port Power Management in All Charge Modes
USB 2.0 and 3.0 Compatible
Integrated 73-mΩ (Typical) High-Side MOSFET
3-A Programmable I_LIMIT Supports 15 Watt Loads
Operating Range: 4.5 V to 5.5 V
2 µA/270 µA I_Q When Disabled/Enabled
Drop-In, BOM Compatible with TPS2543/46
16-Pin WQFN (3.00 mm × 3.00 mm) Package
8-kV ESD Rating on DM/DP Pins
UL Recognized File No. E169910 and CB Certified - Pending

The TPS2547 is a USB charging port controller and power switch with an integrated USB 2.0 high-speed data line (D+/D–) switch. TPS2547 provides the electrical signatures on D+/D– to support charging schemes listed in Feature Description section. TI tests charging of popular mobile phones, tablets, and media devices with the TPS2547 to ensure compatibility with both BC1.2 compliant, and non-BC1.2 compliant devices.

In addition to charging popular devices, the TPS2547 also supports two distinct power management features, namely, power wake and port power management (PPM) through the STATUS pin. Power wake allows for power supply control in S4/S5 charging and PPM supports intelligent port power management in multiport systems. Additionally, system wake up (from S3) with a mouse/keyboard (both low speed and full speed) is fully supported in the TPS2547.

The TPS2547 73-mΩ power-distribution switch is intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. Two programmable current thresholds provide flexibility for setting current limits and load detect thresholds.

The TPS2547 is a USB charging port controller and power switch with an integrated USB 2.0 high-speed data line (D+/D–) switch. TPS2547 provides the electrical signatures on D+/D– to support charging schemes listed in Feature Description section. TI tests charging of popular mobile phones, tablets, and media devices with the TPS2547 to ensure compatibility with both BC1.2 compliant, and non-BC1.2 compliant devices.

In addition to charging popular devices, the TPS2547 also supports two distinct power management features, namely, power wake and port power management (PPM) through the STATUS pin. Power wake allows for power supply control in S4/S5 charging and PPM supports intelligent port power management in multiport systems. Additionally, system wake up (from S3) with a mouse/keyboard (both low speed and full speed) is fully supported in the TPS2547.

The TPS2547 73-mΩ power-distribution switch is intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. Two programmable current thresholds provide flexibility for setting current limits and load detect thresholds.

filter

尋找其它 USB 電源開關與充電埠控制器

下載觀看有字幕稿的影片影片

您可能會感興趣的類似產品

open-in-new

比較替代產品

引腳對引腳且具備與所比較裝置相同的功能

TPS2546

現行

USB 充電連接埠控制器、具 CDP/SDP 自動開關和具負載偵測功能的 2.5A 電源開關 Improves continuous output current and removes CDP-SDP auto switch functionality.

技術文件

star

=TI 所選的此產品重要文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 2

	類型	標題		日期
*	Data sheet	TPS2547 USB Charging Port Controller and 3-Amp Power Switch With Load Detection datasheet (Rev. A)	PDF \| HTML	2017年 5月 22日
	Certificate	UL 2367 Certificate of Compliance 20180130-E169910		2024年 6月 19日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS2546EVM-064 — TPS2546 USB 充電埠控制器和電源開關評估模組

The Texas Instruments TPS2546EVM-064 evaluation module (EVM) helps designers evaluate the performance of the TPS2546 USB Charging Port Power Switch and Controller. The EVM contains input and output connectors. Jumper controls are also provided to ease evaluation of device features.

使用指南: PDF