首頁 介面 USB IC USB Type-C 與 USB 電源傳輸 IC
首頁
介面
USB IC
USB Type-C 與 USB 電源傳輸 IC

TPS65987DDJ

不推薦在新設計中採用

具有整合式電源開關的 USB-C® PD 控制器，適用於 PC 主機和 Thunderbolt 裝置

立即訂購
產品規格表

TPS65987DDJ

不推薦在新設計中採用
產品規格表 立即訂購

產品詳細資料

Function Type-C Type PD controller Power role DRP, Sink, Source Rating Catalog Internal power path 20 V 5 A Data role DFP, DRD, UFP Alternate mode Yes External power-path control GPIO, I2C Dead battery support Yes Operating temperature range (°C) -10 to 75
Function Type-C Type PD controller Power role DRP, Sink, Source Rating Catalog Internal power path 20 V 5 A Data role DFP, DRD, UFP Alternate mode Yes External power-path control GPIO, I2C Dead battery support Yes Operating temperature range (°C) -10 to 75
VQFN (RSH) 56 49 mm² 7 x 7
  • This device is certified by the USB-IF for PD 3.0
    • PD3.0 silicon is required for certification of new USB PD designs
      • TID#: 1067
    • Article on PD2.0 vs PD3.0
  • TPS65987DDJ is a Thunderbolt 3 (TBT3) Device PD3.0 controller
    • This PD controller is only intended for use in TBT3 device designs
    • Refer to Intel Reference Design document number 569174
    • If designing something other than a TBT3 device, please refer to www.ti.com/usb-c and E2E guide
  • Integrated fully managed power paths:
    • Integrated two 5–20 V, 5-A, 25-mΩ bidirectional switches
    • UL 2367 cert#: 20190107-E169910
    • IEC 62368-1 cert#: US-34617-UL
  • Integrated robust power path protection
    • Integrated reverse current protection,undervoltage protection, overvoltage protection, and slew rate control for both 20-V/5-A power paths when configured to Sink
    • Integrated undervoltage and overvoltage protection and current limiting for inrush current protection for both 20-V/5-A power paths when configured to Source
  • USB Type-C Power Delivery (PD) controller

    • 13 configurable GPIOs

    • BC1.2 charging support
    • USB PD 3.0 certified
    • USB Type-C specification certified
    • Cable attach and orientation detection
    • Integrated VCONN switch
    • Physical layer and policy engine
    • 3.3-V LDO output for dead battery support
    • Power supply from 3.3 V or VBUS source
    • 1 I2C primary or secondary port
    • 1 I2C primary only port
    • 1 I2c secondary only port
  • This device is certified by the USB-IF for PD 3.0
    • PD3.0 silicon is required for certification of new USB PD designs
      • TID#: 1067
    • Article on PD2.0 vs PD3.0
  • TPS65987DDJ is a Thunderbolt 3 (TBT3) Device PD3.0 controller
    • This PD controller is only intended for use in TBT3 device designs
    • Refer to Intel Reference Design document number 569174
    • If designing something other than a TBT3 device, please refer to www.ti.com/usb-c and E2E guide
  • Integrated fully managed power paths:
    • Integrated two 5–20 V, 5-A, 25-mΩ bidirectional switches
    • UL 2367 cert#: 20190107-E169910
    • IEC 62368-1 cert#: US-34617-UL
  • Integrated robust power path protection
    • Integrated reverse current protection,undervoltage protection, overvoltage protection, and slew rate control for both 20-V/5-A power paths when configured to Sink
    • Integrated undervoltage and overvoltage protection and current limiting for inrush current protection for both 20-V/5-A power paths when configured to Source
  • USB Type-C Power Delivery (PD) controller

    • 13 configurable GPIOs

    • BC1.2 charging support
    • USB PD 3.0 certified
    • USB Type-C specification certified
    • Cable attach and orientation detection
    • Integrated VCONN switch
    • Physical layer and policy engine
    • 3.3-V LDO output for dead battery support
    • Power supply from 3.3 V or VBUS source
    • 1 I2C primary or secondary port
    • 1 I2C primary only port
    • 1 I2c secondary only port

The TPS65987DDJ is a single port highly integrated stand-alone USB Type-C and Power Delivery (PD) controller optimized for docking stations or monitors. The TPS65987DDJ integrates fully managed power paths with robust protection for a complete USB-C PD solution. This device is featured on Intel’s Reference Design for TBT3 end equipments ensuring the PD controller has proper system level interaction in these types of designs. This feature greatly reduces system design complexity and results in reduced time to market.

The TPS65987DDJ is a single port highly integrated stand-alone USB Type-C and Power Delivery (PD) controller optimized for docking stations or monitors. The TPS65987DDJ integrates fully managed power paths with robust protection for a complete USB-C PD solution. This device is featured on Intel’s Reference Design for TBT3 end equipments ensuring the PD controller has proper system level interaction in these types of designs. This feature greatly reduces system design complexity and results in reduced time to market.
filter 尋找其它 USB Type-C 與 USB 電源傳輸 IC
下載
索取更多資訊

此 IC 主要用於 Thunderbolt™ 3 裝置。
提供韌體配置工具 GUI 及更多資訊。立即索取

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet TPS65987DDJ USB Type-C® and USB PD Controller With Integrated Power Switches For Thunderbolt 3 Devices datasheet (Rev. B) PDF | HTML 2022年 10月 25日

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點