首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器

TPS7H1301-SP

預覽

具有 LDO 穩壓器的輻射強化、3V 至 6.3V 輸入、400mA 切換式電容器電壓逆變器

產品詳細資料

Rating Space Iout (max) (A) 0.4 Vin (max) (V) 6.3 Vin (min) (V) 3 Vout (max) (V) -0.6 Vout (min) (V) -6 Features Enable, Fixed soft start, Power good, Voltage Regulator Operating temperature range (°C) -55 to 125 Iq (typ) (A) 0.015
Rating Space Iout (max) (A) 0.4 Vin (max) (V) 6.3 Vin (min) (V) 3 Vout (max) (V) -0.6 Vout (min) (V) -6 Features Enable, Fixed soft start, Power good, Voltage Regulator Operating temperature range (°C) -55 to 125 Iq (typ) (A) 0.015
CFP (HBL) 14 73.20624 mm² (9.12 mm × 8.027 mm)
  • Total ionizing dose (TID) characterized
    • Radiation hardness assurance (RHA) availability of up to 100krad(Si)
  • Single-event effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75MeV⋅cm2 /mg
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75MeV⋅cm2 /mg
  • Inverts a positive input voltage and regulates the negative supply
  • Up to 400mA output current
  • 2.5Ω (typical) inverter output impedance, VIN = 5V
  • ±1.5% regulation output accuracy
  • 500kHz (typical) fixed-frequency, adjustable negative output voltage operation (TPS7H1301)
  • 1MHz (typical) fixed frequency, fixed -1.8V output (TPS7H1302)
  • 45dB (typical) LDO PSRR at 100kHz with 100mA load current
  • Plastic packages outgas tested per ASTM E595
  • Available in military (–55°C to 125°C) temp range
  • Total ionizing dose (TID) characterized
    • Radiation hardness assurance (RHA) availability of up to 100krad(Si)
  • Single-event effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75MeV⋅cm2 /mg
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75MeV⋅cm2 /mg
  • Inverts a positive input voltage and regulates the negative supply
  • Up to 400mA output current
  • 2.5Ω (typical) inverter output impedance, VIN = 5V
  • ±1.5% regulation output accuracy
  • 500kHz (typical) fixed-frequency, adjustable negative output voltage operation (TPS7H1301)
  • 1MHz (typical) fixed frequency, fixed -1.8V output (TPS7H1302)
  • 45dB (typical) LDO PSRR at 100kHz with 100mA load current
  • Plastic packages outgas tested per ASTM E595
  • Available in military (–55°C to 125°C) temp range

The TPS7H1301SP, -SEP (TPS7H1301) and TPS7H1302SP, -SEP (TPS7H1302) are charge pump positive-to-negative voltage inverters with an integrated negative low-dropout regulator (LDO). Both devices accept a positive input supply voltage range of 3V to 6.3V and deliver up to 400mA of output current, with integrated enable and power-good functionality.

The TPS7H1301 features a 500kHz (typical) charge pump switching frequency and provides adjustable output voltage regulation. Its STAB pin enables direct access to the negative LDO error amplifier for external compensation, offering design flexibility for optimized transient response.

The TPS7H1302 delivers a fixed -1.8V output voltage with a 1MHz (typical) charge pump switching frequency. By eliminating the need for external feedback resistors, the TPS7H1302 reduces both external component count and overall solution size.

The TPS7H1301SP, -SEP (TPS7H1301) and TPS7H1302SP, -SEP (TPS7H1302) are charge pump positive-to-negative voltage inverters with an integrated negative low-dropout regulator (LDO). Both devices accept a positive input supply voltage range of 3V to 6.3V and deliver up to 400mA of output current, with integrated enable and power-good functionality.

The TPS7H1301 features a 500kHz (typical) charge pump switching frequency and provides adjustable output voltage regulation. Its STAB pin enables direct access to the negative LDO error amplifier for external compensation, offering design flexibility for optimized transient response.

The TPS7H1302 delivers a fixed -1.8V output voltage with a 1MHz (typical) charge pump switching frequency. By eliminating the need for external feedback resistors, the TPS7H1302 reduces both external component count and overall solution size.

下載 觀看有字幕稿的影片 影片

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS7H1301EVM-CVAL — TPS7H1301-SP 評估模組

TPS7H1301EVM-CVAL 展示了具有整合式低壓差穩壓器 (陶瓷封裝)的單一 TPS7H1301-SP 切換式電容器電壓逆變器的運作情形。電路板提供可裝入其他元件的空間,以便進行自訂配置測試。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
CFP (HBL) 14 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片系列

觀看所有影片

影片