首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器

TPS7H4203-SEP

預覽

產品詳細資料

Rating Space Topology Buck Iout (max) (A) 3 Vin (max) (V) 38 Vin (min) (V) 10 Vout (max) (V) 30 Vout (min) (V) 1 Features Differential Remote Sense, Enable, Frequency synchronization, Overcurrent protection, Power good, Prebias startup, Programmable slope compensation, Soft-start adjustable, Synchronous rectification, Tracking, UVLO adjustable Control mode current mode Operating temperature range (°C) -55 to 125 Duty cycle (max) (%) 97.9
Rating Space Topology Buck Iout (max) (A) 3 Vin (max) (V) 38 Vin (min) (V) 10 Vout (max) (V) 30 Vout (min) (V) 1 Features Differential Remote Sense, Enable, Frequency synchronization, Overcurrent protection, Power good, Prebias startup, Programmable slope compensation, Soft-start adjustable, Synchronous rectification, Tracking, UVLO adjustable Control mode current mode Operating temperature range (°C) -55 to 125 Duty cycle (max) (%) 97.9
HTSSOP (PWP) 28 62.08 mm² (9.7 mm × 6.4 mm)
  • Total ionizing dose (TID) characterized
    • Radiation hardness assurance (RHA) availability of up to 100krad(Si)
  • Single-event effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75MeV-cm2/mg
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75MeV-cm2/mg
  • Input voltage range from 10V to 38V
  • 3A maximum output current
  • High efficiency (typical values for PVIN = 28V, VOUT = 12V, fSW = 250kHz)
    • 91.8% at 3A
  • Integrated 214mΩ (HS) and 100mΩ (LS) MOSFETs (typ. at TA = 25℃)
  • Flexible switching frequency options:
    • 100kHz to 500kHz, accurate (±10%), adjustable internal oscillator
    • 100kHz to 500kHz external sync capability
    • SYNC pin can be configured as an output with 180° out of phase at fSW = 250kHz to parallel 2 devices
  • 1V ± 1% voltage reference over line, temperature, and radiation
  • Monotonic start-up into prebiased outputs
  • Adjustable slope compensation and soft-start
  • Adjustable input enable and power-good output for power sequencing
  • Power-good output monitor for undervoltage and overvoltage
  • Overvoltage protection
  • Supports inverting buck-boost topology
  • Plastic packages outgas tested per ASTM E595
  • Available in military (–55°C to 125°C) temperature range
  • Total ionizing dose (TID) characterized
    • Radiation hardness assurance (RHA) availability of up to 100krad(Si)
  • Single-event effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75MeV-cm2/mg
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75MeV-cm2/mg
  • Input voltage range from 10V to 38V
  • 3A maximum output current
  • High efficiency (typical values for PVIN = 28V, VOUT = 12V, fSW = 250kHz)
    • 91.8% at 3A
  • Integrated 214mΩ (HS) and 100mΩ (LS) MOSFETs (typ. at TA = 25℃)
  • Flexible switching frequency options:
    • 100kHz to 500kHz, accurate (±10%), adjustable internal oscillator
    • 100kHz to 500kHz external sync capability
    • SYNC pin can be configured as an output with 180° out of phase at fSW = 250kHz to parallel 2 devices
  • 1V ± 1% voltage reference over line, temperature, and radiation
  • Monotonic start-up into prebiased outputs
  • Adjustable slope compensation and soft-start
  • Adjustable input enable and power-good output for power sequencing
  • Power-good output monitor for undervoltage and overvoltage
  • Overvoltage protection
  • Supports inverting buck-boost topology
  • Plastic packages outgas tested per ASTM E595
  • Available in military (–55°C to 125°C) temperature range

The TPS7H4203 is a 10V to 38V, 3A synchronous buck converter optimized for use in a space environment. The peak current mode converter offers high efficiency, excellent transient performance, and a lower component count.

The TPS7H4203 wide voltage range allows it to function as a point-of-load regulator, converting power directly from 28V or 12V rails. The SS_TR pin controls the output voltage startup ramp, while the EN and PWRGD pins enable power sequencing capabilities.

Two devices can be configured in parallel without an external clock for increased current capabilities. Additionally, the device includes configurable loop compensation and slope compensation. Internal protection for overload, overvoltage, and over temperature are also incorporated.

The TPS7H4203 is a 10V to 38V, 3A synchronous buck converter optimized for use in a space environment. The peak current mode converter offers high efficiency, excellent transient performance, and a lower component count.

The TPS7H4203 wide voltage range allows it to function as a point-of-load regulator, converting power directly from 28V or 12V rails. The SS_TR pin controls the output voltage startup ramp, while the EN and PWRGD pins enable power sequencing capabilities.

Two devices can be configured in parallel without an external clock for increased current capabilities. Additionally, the device includes configurable loop compensation and slope compensation. Internal protection for overload, overvoltage, and over temperature are also incorporated.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS7H4203-SP and TPS7H4203-SEP 10V to 38V Input 3A Radiation-Hardened Synchronous Buck Converter datasheet PDF | HTML 2026/10/28

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS7H4203EVM — TPS7H4203-SEP 評估模組

TPS7H4203EVM 展示單一 TPS7H4203-SEP 同步降壓轉換器的運作。電路板提供可裝入其他元件的元件封裝,以便進行自訂配置測試,並提供跨接器和測試點,以簡化裝置配置和性能驗證。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TPS7H4203-SP and TPS7H4203-SEP SIMPLIS Model

SNVMCF7.ZIP (24 KB) - SIMPLIS 模型
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 28 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片