首頁 介面 HDMI、顯示介面和 MIPI IC
首頁
介面
HDMI、顯示介面和 MIPI IC

TS3DV642-Q1

現行

6 Gbps 12 通道差分 1 至 2 及至 2 至 1 多工器

立即訂購
產品規格表

TS3DV642-Q1

現行
立即訂購

產品詳細資料

Type Passive mux Protocols Analog, DVI, DisplayPort, HDMI, LVDS, MIPI, TMDS, VGA Rating Automotive Speed (max) (Gbpp) 6 Number of channels 12 Operating temperature range (°C) -40 to 105
Type Passive mux Protocols Analog, DVI, DisplayPort, HDMI, LVDS, MIPI, TMDS, VGA Rating Automotive Speed (max) (Gbpp) 6 Number of channels 12 Operating temperature range (°C) -40 to 105
WQFN (RUA) 42 31.5 mm² (9 mm × 3.5 mm)
  • Automotive Q100 qualified
  • Temperature range of -40 to 105 °C (grade 2)
  • Support 6 differential or 12 single-ended signals or other differential/single ended combinations
  • Supports HDMI 1.4b / 2.0, DisplayPort 1.4 HBR2, DP++, Mipi DPHY / CPHY DSI / CSI-2, LVDS
  • Bidirectional analog mux - handles most electrical signals within 0 to 5.5 V and DC to 6 Gbps range
  • –3-dB differential BW of 5.8 GHz
  • Excellent dynamic characteristics
    • Insertion loss: –1.6 dB at 3.0 GHz
    • Return loss: –17 dB at 3.0 GHz
  • Support 1.8 V, 3.3 V or 5.0 V control logic
  • Single supply voltage of 3.3 V
  • Low active (45 µA) and standby power (6 µA)
  • IOFF protection that prevents current leakage when supply rail collapsed (VCC = 0 V)
  • ESD Performance of 3 kV HBM and 1 kV CDM
  • 42-pin, 3.5 x 9 mm, 0.5 mm pitch WQFN package with wettable flank
  • Automotive Q100 qualified
  • Temperature range of -40 to 105 °C (grade 2)
  • Support 6 differential or 12 single-ended signals or other differential/single ended combinations
  • Supports HDMI 1.4b / 2.0, DisplayPort 1.4 HBR2, DP++, Mipi DPHY / CPHY DSI / CSI-2, LVDS
  • Bidirectional analog mux - handles most electrical signals within 0 to 5.5 V and DC to 6 Gbps range
  • –3-dB differential BW of 5.8 GHz
  • Excellent dynamic characteristics
    • Insertion loss: –1.6 dB at 3.0 GHz
    • Return loss: –17 dB at 3.0 GHz
  • Support 1.8 V, 3.3 V or 5.0 V control logic
  • Single supply voltage of 3.3 V
  • Low active (45 µA) and standby power (6 µA)
  • IOFF protection that prevents current leakage when supply rail collapsed (VCC = 0 V)
  • ESD Performance of 3 kV HBM and 1 kV CDM
  • 42-pin, 3.5 x 9 mm, 0.5 mm pitch WQFN package with wettable flank

The TS3DV642-Q1 is an analog high-speed bidirectional passive switch in mux or demux configurations that works for many high-speed differential interfaces with data rates up to 6 Gbps. It is suited for many applications including HDMI 1.4 / 2.0, DisplayPort 1.4 and Mipi DPHY / CPHY DSI / CSI-2. The TS3DV642-Q1 supports both differential and single-ended signaling - virtually compatible to most standard and non standard interfaces. The dynamic characteristics of the TS3DV642-Q1 allows high-speed switching with minimal attenuation to the signal eye diagram, and with very little added jitter. The device’s silicon design is optimized for excellent frequency response at higher frequency spectrum of the signals. The device supports differential signaling with common mode voltage range (CMV) of 0 to 3.6 V. The device also supports 0 - 5.5 V single-ended CMOS signals.

The TS3DV642-Q1 consumes very low active power of 45 µA. The device also offers a power-down mode, in which all channels become Hi-Z and the device operates with minimal power.

The TS3DV642-Q1 is an analog high-speed bidirectional passive switch in mux or demux configurations that works for many high-speed differential interfaces with data rates up to 6 Gbps. It is suited for many applications including HDMI 1.4 / 2.0, DisplayPort 1.4 and Mipi DPHY / CPHY DSI / CSI-2. The TS3DV642-Q1 supports both differential and single-ended signaling - virtually compatible to most standard and non standard interfaces. The dynamic characteristics of the TS3DV642-Q1 allows high-speed switching with minimal attenuation to the signal eye diagram, and with very little added jitter. The device’s silicon design is optimized for excellent frequency response at higher frequency spectrum of the signals. The device supports differential signaling with common mode voltage range (CMV) of 0 to 3.6 V. The device also supports 0 - 5.5 V single-ended CMOS signals.

The TS3DV642-Q1 consumes very low active power of 45 µA. The device also offers a power-down mode, in which all channels become Hi-Z and the device operates with minimal power.
filter 尋找其它 HDMI、顯示介面和 MIPI IC
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
TS3DV642 現行 6 Gbps 12 通道差動 1 對 2 和 2 對 1 多工器，適用 DVI 1.0/DisplayPort 1.4/HDMI 2.0 Non-automotive version

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TS3DV642-Q1 6-Gbps 12-Channel differential 1-to-2 and 2-to-1 mux datasheet (Rev. A) PDF | HTML 2021/5/21
Product overview Mipi Switches PDF | HTML 2022/1/14
證書 TS3DV642Q1EVM-105 EU RoHS Declaration of Conformity (DoC) 2020/12/3

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TS3DV642Q1EVM-105 — 具 1.8V 相容控制斷電模式評估模組的 TS3DV642-Q1 12 通道 1:2 多工器/解多工器

TS3DV642Q1 是一款 12 通道 1:2 或 2:1 雙向多工器/解多工器。TS3DV642Q1 在 2.6V 至 4.5V 供電範圍內運作，因此適用於電池供電應用。提供低平導通電阻 (RON) 及低 I/O 電容，可實現高達 7.5 GHz 的一般頻寬。此裝置可為 MIPI C-PHY、D-DPHY、HDMI 和 DisplayPort 應用提供必要的高頻寬。
使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RUA) 42 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片