TSER9615

現行

適用高速感測器的 7.55-Gbps MIPI® CSI-2 V³Link™ 串聯器

TSER9615

現行

產品詳細資料

Applications Camera SerDes Color depth (bpp) 24 Function Serializer Input compatibility MIPI CSI-2 Output compatibility V3Link Features Bidirectional, CRC, Coax or STP, Flexible GPIOs, I2C Config, Pattern Generation, Temperature sensing Signal conditioning DC Balance EMI reduction LVDS Diagnostics BIST Rating Catalog Operating temperature range (°C) -20 to 85
Applications Camera SerDes Color depth (bpp) 24 Function Serializer Input compatibility MIPI CSI-2 Output compatibility V3Link Features Bidirectional, CRC, Coax or STP, Flexible GPIOs, I2C Config, Pattern Generation, Temperature sensing Signal conditioning DC Balance EMI reduction LVDS Diagnostics BIST Rating Catalog Operating temperature range (°C) -20 to 85
VQFN (RHB) 32 25 mm² (5 mm × 5 mm)
  • 7.55 Gbps (6 Gbps video payload) serializer supports high-speed sensors including 8 MP+ imagers
  • Supports 3 data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps.
  • Power-over-Coax (PoC) compatible transceiver
  • Single MIPI D-PHY port with 4 lanes
    • Compliant to MIPI D-PHY v2.1
    • 1 Clock lane and 1, 2 or 4 configurable data lanes
    • Up to 1.5 Gbps/lane
    • Supports polarity pin inversion (p/n)
    • Up to 16 virtual channels
  • Single port MIPI CSI-2 receiver
    • Compliant to MIPI CSI-2 v2.1
    • Supports multiple data types and multi-exposure
  • Advanced data protection and diagnostics including CRC data protection, sensor data integrity check, I 2C write protection, voltage and temperature measurement, programmable alarm and line fault detection
  • Flexible programmable output clock generator
  • Supports single-ended coaxial cable and shielded-twisted-pair (STP) cable
  • Ultra-low latency bidirectional I2C and GPIO control channel enables ISP control from ECU
  • Single 1.8 V power supply
  • Compatible with all V 3Link Vision / Enhanced Vision deserializers
  • Pin-to-pin compatible with the TSER953 serializer
  • 7.55 Gbps (6 Gbps video payload) serializer supports high-speed sensors including 8 MP+ imagers
  • Supports 3 data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps.
  • Power-over-Coax (PoC) compatible transceiver
  • Single MIPI D-PHY port with 4 lanes
    • Compliant to MIPI D-PHY v2.1
    • 1 Clock lane and 1, 2 or 4 configurable data lanes
    • Up to 1.5 Gbps/lane
    • Supports polarity pin inversion (p/n)
    • Up to 16 virtual channels
  • Single port MIPI CSI-2 receiver
    • Compliant to MIPI CSI-2 v2.1
    • Supports multiple data types and multi-exposure
  • Advanced data protection and diagnostics including CRC data protection, sensor data integrity check, I 2C write protection, voltage and temperature measurement, programmable alarm and line fault detection
  • Flexible programmable output clock generator
  • Supports single-ended coaxial cable and shielded-twisted-pair (STP) cable
  • Ultra-low latency bidirectional I2C and GPIO control channel enables ISP control from ECU
  • Single 1.8 V power supply
  • Compatible with all V 3Link Vision / Enhanced Vision deserializers
  • Pin-to-pin compatible with the TSER953 serializer

The TSER9615 serializer is part of TI’s V 3Link Enhanced Vision family and is designed to support ultra-high-speed data sensors including 8MP+ Imagers, satellite RADAR, LIDAR, and time-of-flight (ToF) sensors. The serializer delivers an 7.55 Gbps forward channel and an ultra-low latency, 47.1875 Mbps bidirectional control channel and supports power over a single coax (PoC) or STP cable. When the TSER9615 is used in Enhanced Vision mode, it provides the possibility to select between three data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps. The TSER9615 features advanced data protection and diagnostic features. Together with a companion deserializer, the TSER9615 delivers precise multi-camera sensor clock and sensor synchronization.

The TSER9615 is qualified with a wide temperature range of –20°C to 85°C. The serializer comes in a small 5 mm × 5 mm VQFN package for space-constrained sensor applications.

The TSER9615 serializer is part of TI’s V 3Link Enhanced Vision family and is designed to support ultra-high-speed data sensors including 8MP+ Imagers, satellite RADAR, LIDAR, and time-of-flight (ToF) sensors. The serializer delivers an 7.55 Gbps forward channel and an ultra-low latency, 47.1875 Mbps bidirectional control channel and supports power over a single coax (PoC) or STP cable. When the TSER9615 is used in Enhanced Vision mode, it provides the possibility to select between three data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps. The TSER9615 features advanced data protection and diagnostic features. Together with a companion deserializer, the TSER9615 delivers precise multi-camera sensor clock and sensor synchronization.

The TSER9615 is qualified with a wide temperature range of –20°C to 85°C. The serializer comes in a small 5 mm × 5 mm VQFN package for space-constrained sensor applications.

下載 觀看有字幕稿的影片 影片
索取更多資訊

提供完整產品規格表及其他資源。立即索取

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TSER9615 V3LinkTM7.55 GbpsSerializer MIPI CSI-2 Interface for High-Speed, High-Resolution Cameras, RADAR, and Other Sensors datasheet (Rev. A) PDF | HTML 2023/11/16

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DS90UB971-Q1EVM — DS90UB971-Q1 評估模組

DS90UB971-Q1 評估模組 (EVM) 是一款功能板設計,用於評估 DS90UB971-Q1 FPD-Link IV 串聯器。DS90UB971-Q1 串聯器是第一代 FPD-Link IV 串聯器,旨在支援超高速感測器,包括 8MP+ 成像儀、衛星雷達、光達和飛時測距 (ToF) 感測器。晶片可提供 8.4Gbps 順向通道及超低延遲、52.5Mbps 雙向控制通道,並支援單一同軸 (PoC) 供電。DS90UB971-Q1 也支援使用 STP 電纜的順向通道和反向通道功能。DS90UB971-Q1 具備先進的數據保護和診斷功能,可支援 ADAS (...)
支援產品和硬體
應用軟體及架構

ALP — Analog LaunchPad Framework Utility

To get started with Analog LaunchPad (ALP) software: Download and install the ALP Framework Utility. Add new device profiles and example scripts with the ALP-PROFILE-UPDATE tool.
支援產品和硬體
支援軟體

ALP-PROFILE-UPDATE — Analog LaunchPad Profile Update Software

ALP Profile Update contains latest fixes and updates to ALP profiles. If you are installing for the first time please install ALP Profile Update after installing ALP Framework.
支援產品和硬體
模擬型號

TSER9615 IBIS Model

SNLM267.ZIP (2669 KB) - IBIS 模型
lock = 需要匯出核准 (1 分鐘)
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RHB) 32 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片