現在提供此產品的更新版本

open-in-new 比較替代產品
功能相似於所比較的產品
DRV8231A 現行 具有整合式電流穩壓及電流感測回饋的 35-V、3.7-A 全橋馬達驅動器 Increased voltage range (33V), more current (3.7A), integrated current sensing, smaller package size
DRV8434 現行 具整合式電流感測與 1/256 微型步進的 48-V、2.5-A 雙極步進馬達驅動器 Wider voltage range (4.5V min), increased current (2.5A), up to 1/256 microstep indexer, more protection features
DRV8436E 現行 具有整合式電流感測的 48-V、1.5-A 雙極步進或雙刷馬達驅動器 Wider voltage range (4.5V min), more current (1.5A), PH/EN and PWM control

產品詳細資料

Vs ABS (max) (V) 50 Peak output current (A) 1 Rating Catalog Operating temperature range (°C) 0 to 70
Vs ABS (max) (V) 50 Peak output current (A) 1 Rating Catalog Operating temperature range (°C) 0 to 70
PDIP (N) 16 181.42 mm² 19.3 x 9.4
  • Full-Step, Half-Step and Micro-Step Capability
  • Bipolar Output Current up to 1A
  • Wide Range of Motor Supply Voltage 10-46V
  • Low Saturation Voltage with Integrated Bootstrap
  • Built-In Fast Recovery Commutating Diodes
  • Current Levels Selected in Steps or Varied Continuously
  • Thermal Protection with Soft Intervention
  • Full-Step, Half-Step and Micro-Step Capability
  • Bipolar Output Current up to 1A
  • Wide Range of Motor Supply Voltage 10-46V
  • Low Saturation Voltage with Integrated Bootstrap
  • Built-In Fast Recovery Commutating Diodes
  • Current Levels Selected in Steps or Varied Continuously
  • Thermal Protection with Soft Intervention

The UC3717A is an improved version of the UC3717, used to switch drive the current in one winding of a bipolar stepper motor. The UC3717A has been modified to supply higher winding current, more reliable thermal protection, and improved efficiency by providing integrated bootstrap circuitry to lower recirculation saturation voltages. The diagram shown below presents the building blocks of the UC3717A. Included are an LS-TTL compatible logic input, a current sensor, a monostable, a thermal shutdown network, and an H-bridge output stage. The output stage features built-in fast recovery commutating diodes and integrated bootstrap pull up. Two UC3717As and a few external components form a complete control and drive unit for LS-TTL or micro-processor controlled stepper motor systems.

The UC3717A is characterized for operation over the temperature range of 0°C to +70°C.

The UC3717A is an improved version of the UC3717, used to switch drive the current in one winding of a bipolar stepper motor. The UC3717A has been modified to supply higher winding current, more reliable thermal protection, and improved efficiency by providing integrated bootstrap circuitry to lower recirculation saturation voltages. The diagram shown below presents the building blocks of the UC3717A. Included are an LS-TTL compatible logic input, a current sensor, a monostable, a thermal shutdown network, and an H-bridge output stage. The output stage features built-in fast recovery commutating diodes and integrated bootstrap pull up. Two UC3717As and a few external components form a complete control and drive unit for LS-TTL or micro-processor controlled stepper motor systems.

The UC3717A is characterized for operation over the temperature range of 0°C to +70°C.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品
DRV8829 現行 具有 32 位準電流調節功能的 50-V、5-A 半雙極步進馬達驅動器 The DRV8829 provides better efficiency, higher current, and a smaller package

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet Stepper Motor Drive Circuit datasheet 1999年 9月 5日
White paper How smart tune regulates current in stepper motors (Rev. A) 2019年 3月 19日
Application note UC3717 and L-C Filter Reduce EMI and Chopping Losses in Step Motor 1999年 9月 5日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

封裝 引腳 下載
PDIP (N) 16 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片