首頁 電源管理 閘極驅動器 隔離式閘極驅動器
首頁
電源管理
閘極驅動器
隔離式閘極驅動器
最新

UCC218302-Q1

現行
立即訂購
產品規格表

UCC218302-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Isolation rating Reinforced Power switch IGBT, SiCFET Withstand isolation voltage (VISO) (Vrms) 5000 Working isolation voltage (VIOWM) (Vrms) 1063 Transient isolation voltage (VIOTM) (VPK) 7071 Peak output current (A) 5, 15 Peak output current (source) (typ) (A) 5, 15 Peak output current (sink) (typ) (A) 5, 15 Features AEC-Q100 Automotive Qual, High CMTI, High-side driver, Integrated protections: UVLO, Isolated, Overcurrent protection, Slew Rate Control, Under voltage lock out, Voltage monitoring Output VCC/VDD (min) (V) 13 Output VCC/VDD (max) (V) 30 Input supply voltage (min) (V) -0.3 Input supply voltage (max) (V) 5.5 Propagation delay time (µs) 0.09 Operating temperature range (°C) -40 to 150 Rating Automotive Undervoltage lockout (typ) (V) 12 TI functional safety category Functional Safety Quality-Managed
Number of channels 1 Isolation rating Reinforced Power switch IGBT, SiCFET Withstand isolation voltage (VISO) (Vrms) 5000 Working isolation voltage (VIOWM) (Vrms) 1063 Transient isolation voltage (VIOTM) (VPK) 7071 Peak output current (A) 5, 15 Peak output current (source) (typ) (A) 5, 15 Peak output current (sink) (typ) (A) 5, 15 Features AEC-Q100 Automotive Qual, High CMTI, High-side driver, Integrated protections: UVLO, Isolated, Overcurrent protection, Slew Rate Control, Under voltage lock out, Voltage monitoring Output VCC/VDD (min) (V) 13 Output VCC/VDD (max) (V) 30 Input supply voltage (min) (V) -0.3 Input supply voltage (max) (V) 5.5 Propagation delay time (µs) 0.09 Operating temperature range (°C) -40 to 150 Rating Automotive Undervoltage lockout (typ) (V) 12 TI functional safety category Functional Safety Quality-Managed
SSOP (DFP) 28 78.795 mm² (7.65 mm × 10.3 mm)
  • 5kVRMS single channel isolated gate driver
  • AEC-Q100 qualified for automotive applications
  • Optimized for SiC MOSFETs and IGBTs switching up to 1500Vpk
  • 30V maximum output drive voltage (VDD-VEE)
  • Dual split outputs with on-the-fly drive strength selection
    • ±10A and ±5A drive current outputs
    • Digital input GD_SEL selects drive strength
  • 500V/ns minimum CMTI
  • 200ns response time fast DESAT protection with 9V threshold
  • Dedicated Soft Shut Down (SSD) pin with 2.5A sinking capability. Shut down current is controllable by an external resistor.
  • 4A internal active Miller clamp
  • Overcurrent reporting on FLT and reset from RST/EN
  • Fast enable and disable response on RST/EN
  • 12V VDD UVLO with power good on RDY
  • Overtemperature protection indicated on RDY
  • Output voltage gate monitor with real-time output state feedback on OUT_FB.
  • Active short circuit (ASC) input on secondary side to turn on power switch during system fault.
  • Wide body package with creepage and clearance > 8mm
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: -40°C to +125°C ambient operating temperature
  • 5kVRMS single channel isolated gate driver
  • AEC-Q100 qualified for automotive applications
  • Optimized for SiC MOSFETs and IGBTs switching up to 1500Vpk
  • 30V maximum output drive voltage (VDD-VEE)
  • Dual split outputs with on-the-fly drive strength selection
    • ±10A and ±5A drive current outputs
    • Digital input GD_SEL selects drive strength
  • 500V/ns minimum CMTI
  • 200ns response time fast DESAT protection with 9V threshold
  • Dedicated Soft Shut Down (SSD) pin with 2.5A sinking capability. Shut down current is controllable by an external resistor.
  • 4A internal active Miller clamp
  • Overcurrent reporting on FLT and reset from RST/EN
  • Fast enable and disable response on RST/EN
  • 12V VDD UVLO with power good on RDY
  • Overtemperature protection indicated on RDY
  • Output voltage gate monitor with real-time output state feedback on OUT_FB.
  • Active short circuit (ASC) input on secondary side to turn on power switch during system fault.
  • Wide body package with creepage and clearance > 8mm
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: -40°C to +125°C ambient operating temperature

The UCC218302-Q1 is a galvanically isolated single-channel gate driver with advanced protection features, best-in-class dynamic performance, and robustness designed for SiC MOSFETs and IGBTs up to 1500V DC operating voltage. The UCC218302-Q1 has dual outputs up to ±10A and ±5A peak source and sink current.

The input side is isolated from the output side with SiO2 isolation technology, supporting up to 1.06kVRMS working voltage and 10kVPK surge immunity. The isolation barrier also provides low part-to-part skew, and >500V/ns common-mode noise immunity (CMTI).

The UCC218302-Q1 includes state-of-art protection features such as fast overcurrent and short-circuit detection, controlled soft shutdown after a fault, fault reporting, active Miller clamp, input and output side power supply UVLO to optimize SiC and IGBT switching behavior and robustness, active short circuit input on the secondary side, and output voltage gate monitoring.

The UCC218302-Q1 is a galvanically isolated single-channel gate driver with advanced protection features, best-in-class dynamic performance, and robustness designed for SiC MOSFETs and IGBTs up to 1500V DC operating voltage. The UCC218302-Q1 has dual outputs up to ±10A and ±5A peak source and sink current.

The input side is isolated from the output side with SiO2 isolation technology, supporting up to 1.06kVRMS working voltage and 10kVPK surge immunity. The isolation barrier also provides low part-to-part skew, and >500V/ns common-mode noise immunity (CMTI).

The UCC218302-Q1 includes state-of-art protection features such as fast overcurrent and short-circuit detection, controlled soft shutdown after a fault, fault reporting, active Miller clamp, input and output side power supply UVLO to optimize SiC and IGBT switching behavior and robustness, active short circuit input on the secondary side, and output voltage gate monitoring.
filter 尋找其它 隔離式閘極驅動器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 UCC218302-Q1 15A Adjustable Drive Strength Reinforced Isolated Single Channel Gate Driver for SiC/IGBT with Advanced Protection datasheet PDF | HTML 2026/9/17

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

認證

UCC2183XXQEVM-123-DOC-CERT — UCC2183XXQEVM-123 EU Declaration of Conformity (DoC)

UCC2183XXQEVM-123 EU Declaration of Conformity (DoC)
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SSOP (DFP) 28 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片