SLVUCO1A May   2023  – April 2024 DRV8213 , DRV8214 , DRV8234

PRODUCTION DATA  

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Headers and Test Points Information
    2. 2.2 Connector Information
    3. 2.3 Indicator LEDs
    4. 2.4 Hardware Setup
  9. 3Software
    1. 3.1 Software Setup
    2. 3.2 Web GUI Access or Local GUI Installation
    3. 3.3 Connecting EVM to GUI
    4. 3.4 GUI Overview
    5. 3.5 DRV8213EVM
    6. 3.6 DRV8214EVM, DRV8215EVM, DRV8234EVM, and DRV8235EVM
      1. 3.6.1 Quick Start
      2. 3.6.2 Dashboard
      3. 3.6.3 Register Map
    7. 3.7 Scripting Window
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials (BOM)
  11. 5Additional Information
    1. 5.1 Trademarks
  12. 6Revision History

2.2 Connector Information

GUID-20230314-SS0I-PMBW-QZZF-RKXQG6PHZ9XC-low.png Figure 2-4 Connectors
Table 2-3 Connectors Description

Component label

Description

A

Input power supply connector. Power cables can be directly connected to the screw terminals or clipped to the test points on either side of the connector.

B

Driver output connector. OUT1 and OUT2 signals from DRV output. Connect the motor terminals across OUT1 and OUT2.

C

GND strip for grounding voltage probes and digital multimeter leads

D

USB connector