THS4561
Energieeffizienter Volldifferenzverstärker, 60 MHz, großer Versorgungsspannungsbereich
THS4561
- Bandwidth: 60 MHz (G = 1 V/V)
- Slew Rate: 230 V/µs
- Gain Bandwidth Product: 68 MHz
- Voltage Noise:
- 1/f Voltage Noise Corner: 8 Hz
- Broadband Noise (≥ 500 Hz): 4 nV/√ Hz
- Input Offset: ±250 µV (Maximum)
- Drift: ±4 µV/°C (Maximum)
- Supply Operating Range: 2.85 V to 12.6 V
- Supply Current: 775 µA
- Negative Rail Input (NRI)
- Rail-to-Rail Output (RRO)
- Very Low Harmonic Distortion:
- HD2: –117 dBc at 2 VPP, 100 kHz
- HD3: –124 dBc at 2 VPP, 100 kHz
- 0.01% Settling (2-V Step): 90 ns
The THS4561 fully differential amplifier (FDA) offers a simple interface from single-ended sources to the differential output required by precision analog-to-digital converters (ADCs). Designed for a very low,8-Hz, 1/f voltage noise corner and low, 130-dB total harmonic distortion (THD) while consuming only a775-µA quiescent current, the THS4561 is well suited for power-sensitive data acquisition (DAQ) systems where high performance is required with the best signal-to-noise ratio (SNR) and spurious-free dynamic range (SFDR) through the amplifier and ADC combination.
The THS4561 features the required negative rail input when interfacing a DC-coupled, ground-centered, source signal to a single-supply, differential-input ADC. Low DC error and drift terms support the emerging high-speed and high-resolution successive approximation register (SAR) and delta-sigma (ΔΣ) ADC input requirements. A 2.85-V to 12.6-V supply range with a flexible output common-mode setting with low headroom to the supplies supports a wide range of ADC input and digital-to-analog converter (DAC) output requirements.
The THS4561 device is characterized for operation from –40°C to +125°C.
Technische Dokumentation
Typ | Titel | Datum | ||
---|---|---|---|---|
* | Data sheet | THS4561 Low-Power, High Supply Range, 60-MHz, Fully Differential Amplifier datasheet (Rev. D) | PDF | HTML | 01 Feb 2021 |
Product overview | Pairing ADC Drivers With Fully-Differential Input ADCs for Wide Bandwidth Data Acquisition | 01 Apr 2024 | ||
Product overview | PLC Analog Input Front-End Architectures | PDF | HTML | 31 Jul 2022 | |
Circuit design | Differential input to differential output circuit using a fully-differential amp | 07 Jan 2019 | ||
Circuit design | Single-ended input to differential output circuit using a fully-differential amp | 07 Jan 2019 | ||
Application note | Attenuator Amplifier Design to Maximize the Input Voltage of Differential ADCs | 14 Jun 2018 | ||
EVM User's guide | THS4561 EVM User's Guide | 10 Aug 2017 | ||
Application note | Noise Analysis for High Speed Op Amps (Rev. A) | 17 Jan 2005 |
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
ADS127L21EVM-PDK — ADS127L21 – Evaluierungsmodul für ADC mit einfach anzusteuernden Eingängen und Breitbandfiltern oder
THS4561DGKEVM — THS4561-Evaluierungsmodul
Discrete Impedance Spectroscopy TINA-TI Reference Design (Single-Ended)
Impedance Spectroscopy TINA-TI Reference Design (Differential)
THS4561 TINA-TI Reference Design (Rev. D)
CIRCUIT060069 — Differenzeingang zu Differenzausgangsschaltung mit einem Volldifferenzialverstärker
CIRCUIT060070 — Schaltkreis von einzeln geerdetem Eingang zu differenziellem Ausgang unter Verwendung eines Volldiff
PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool
TINA-TI — SPICE-basiertes analoges Simulationsprogramm
TIDA-01040 — Referenzdesign Batterieprüfgeräte für Hochstromanwendungen
TIDA-01041 — Batterieprüfgeräte-Referenzdesign zur mehrphasigen hochpräzisen Batterieformation im Bereich von 0,5
TIDA-01042 — Referenzdesign für modulare Batterietester für 50-A-, 100-A- und 200-A-Anwendungen
TIDA-01057 — Referenzdesign Maximierung des dynamischen Signalbereichs für echten Differenzeingang von 10 Vpp bis
Gehäuse | Pins | Herunterladen |
---|---|---|
VQFN (RGT) | 16 | Optionen anzeigen |
VSSOP (DGK) | 8 | Optionen anzeigen |
WQFN (RUN) | 10 | Optionen anzeigen |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.