전원 관리 선형 및 저손실(LDO) 레귤레이터

TPS7A90

활성

500mA, 저잡음, 높은 PSRR, 조정 가능한 출력 초저손실 전압 레귤레이터, 높은 정확도

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TLV758P 활성 500mA, 저 IQ, 고정밀, 조정 가능한 초저 손실 전압 레귤레이터(활성화) Adjustable output LDO with lower IQ for cost-sensitive applications.
TPS745 활성 전원 양호 기능을 지원하는 500mA, 저 IQ, 고정밀, 조정 가능한 초저 손실 전압 레귤레이터 Adjustable output LDO with lower IQ and power good for cost-sensitive applications.

제품 상세 정보

Output options Adjustable Output Iout (max) (A) 0.5 Vin (max) (V) 6.5 Vin (min) (V) 1.4 Vout (max) (V) 5.7 Vout (min) (V) 0.8 Noise (µVrms) 4.7 Iq (typ) (mA) 2.1 Thermal resistance θJA (°C/W) 57 Rating Catalog Load capacitance (min) (µF) 22 Regulated outputs (#) 1 Features Enable, Foldback Overcurrent protection, Output discharge, Power good, Soft start Accuracy (%) 1 PSRR at 100 KHz (dB) 48 Dropout voltage (Vdo) (typ) (mV) 75 Operating temperature range (°C) -40 to 125
Output options Adjustable Output Iout (max) (A) 0.5 Vin (max) (V) 6.5 Vin (min) (V) 1.4 Vout (max) (V) 5.7 Vout (min) (V) 0.8 Noise (µVrms) 4.7 Iq (typ) (mA) 2.1 Thermal resistance θJA (°C/W) 57 Rating Catalog Load capacitance (min) (µF) 22 Regulated outputs (#) 1 Features Enable, Foldback Overcurrent protection, Output discharge, Power good, Soft start Accuracy (%) 1 PSRR at 100 KHz (dB) 48 Dropout voltage (Vdo) (typ) (mV) 75 Operating temperature range (°C) -40 to 125
WSON (DSK) 10 6.25 mm² 2.5 x 2.5
  • 1.0% accuracy over line, load, and temperature
  • Low output noise: 4.7 µVRMS (10 Hz–100 kHz)
  • Low dropout: 100 mV (max) at 0.5 A
  • Wide input voltage range: 1.4 V to 6.5 V
  • Wide output voltage range: 0.8 V to 5.7 V
  • High power-supply rejection ratio (PSRR):
    • 60 dB at DC
    • 50 dB at 100 kHz
    • 30 dB at 1 MHz
  • Fast transient response
  • Adjustable start-up in-rush control with selectable soft-start charging current
  • Open-drain power-good (PG) output
  • RθJC = 3.2ºC/W
  • 2.5-mm × 2.5-mm, 10-pin WSON package
  • 1.0% accuracy over line, load, and temperature
  • Low output noise: 4.7 µVRMS (10 Hz–100 kHz)
  • Low dropout: 100 mV (max) at 0.5 A
  • Wide input voltage range: 1.4 V to 6.5 V
  • Wide output voltage range: 0.8 V to 5.7 V
  • High power-supply rejection ratio (PSRR):
    • 60 dB at DC
    • 50 dB at 100 kHz
    • 30 dB at 1 MHz
  • Fast transient response
  • Adjustable start-up in-rush control with selectable soft-start charging current
  • Open-drain power-good (PG) output
  • RθJC = 3.2ºC/W
  • 2.5-mm × 2.5-mm, 10-pin WSON package

The TPS7A90 is a low-noise (4.7 µVRMS), low-dropout (LDO) voltage regulator capable of sourcing 500 mA with only 100 mV of maximum dropout to 5 V and 200 mV to 5.7 V.

The TPS7A90 output is adjustable with external resistors from 0.8 V to 5.7 V. The TPS7A90 wide input voltage range supports operation as low as 1.4 V and up to 6.5 V.

With 1% output voltage accuracy (over line, load, and temperature) and soft-start capabilities to reduce in-rush current, the TPS7A90 is ideal for powering sensitive analog low-voltage devices [such as voltage-controlled oscillators (VCOs), analog-to-digital converters (ADCs), and digital-to-analog converters (DACs)].

The TPS7A90 is designed to power noise-sensitive components such as those found in high-speed communication, video, medical, or test and measurement applications. The very low 4.7-µVRMS output noise and wideband PSRR (30 dB at 1 MHz) minimizes phase noise and clock jitter. These features maximize performance of clocking devices, ADCs, and DACs.





The TPS7A90 is a low-noise (4.7 µVRMS), low-dropout (LDO) voltage regulator capable of sourcing 500 mA with only 100 mV of maximum dropout to 5 V and 200 mV to 5.7 V.

The TPS7A90 output is adjustable with external resistors from 0.8 V to 5.7 V. The TPS7A90 wide input voltage range supports operation as low as 1.4 V and up to 6.5 V.

With 1% output voltage accuracy (over line, load, and temperature) and soft-start capabilities to reduce in-rush current, the TPS7A90 is ideal for powering sensitive analog low-voltage devices [such as voltage-controlled oscillators (VCOs), analog-to-digital converters (ADCs), and digital-to-analog converters (DACs)].

The TPS7A90 is designed to power noise-sensitive components such as those found in high-speed communication, video, medical, or test and measurement applications. The very low 4.7-µVRMS output noise and wideband PSRR (30 dB at 1 MHz) minimizes phase noise and clock jitter. These features maximize performance of clocking devices, ADCs, and DACs.





다운로드 스크립트와 함께 비디오 보기 동영상
Information

TI.com 재고에서 유사한 제품 확인

유사한 사양 제품, 주문 가능한 TI.com 재고별로 정렬.

지금 보기

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기6
유형 직함 날짜
* Data sheet TPS7A90 500-mA, High-Accuracy, Low-Noise LDO Voltage Regulator datasheet (Rev. A) PDF | HTML 2020/06/29
White paper Parallel LDO Architecture Design Using Ballast Resistors PDF | HTML 2022/12/14
White paper Comprehensive Analysis and Universal Equations for Parallel LDO's Using Ballast PDF | HTML 2022/12/13
Application note High-Performance CMOS Image Sensor Power Supply in Industrial Camera and Vision (Rev. A) 2021/07/30
Selection guide Low Dropout Regulators Quick Reference Guide (Rev. P) 2018/03/21
EVM User's guide TPS7A91EVM-831 Evaluation Module User's Guide 2016/11/29

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

ADC3541EVM — ADC3541 10MSPS 샘플링 속도의 14비트 초저전력 높은 SNR ADC용 평가 모듈

ADC3541 평가 모듈(EVM)은 초저전력, 고선형성 ADC3541 제품의 성능을 입증하기 위한 플랫폼입니다. 온보드 전압 조정 및 유연한 아날로그 입력 옵션으로 여러 애플리케이션을 쉽게 평가할 수 있습니다.

FMC 커넥터를 통해 TSW1400EVM(별매)과 상호 작용하는 경우 실제 및 복잡한 데시메이션 모드를 포함하여 직렬 CMOS 인터페이스의 데이터 캡처(최대 512MB)를 쉽게 평가할 수 있습니다.

사용 설명서: PDF | HTML
TI.com에서 구매할 수 없습니다
평가 보드

ADC3642EVM — 듀얼 채널, 14비트, 25MSPS, 저잡음, 초저전력 ADC를 위한 ADC3642 평가 모듈

ADC3642 평가 모듈(EVM)은 초저전력, 높은 선형성 ADC3642의 성능을 보여주는 플랫폼입니다. 온보드 전압 조정 및 유연한 아날로그 입력 옵션으로 여러 애플리케이션을 쉽게 평가할 수 있습니다.

FMC(FPGA(필드 프로그래머블 게이트 어레이) 메자닌 카드) 커넥터를 통해 TSW1400EVM(별매)과 인터페이스하는 경우 실제 및 복잡한 데시메이션 모드를 포함하여 CMOS(보조 금속 산호막 반도체) 인터페이스의 데이터 캡처(최대 512MB)를 손쉽게 평가할 수 있습니다.

사용 설명서: PDF
TI.com에서 구매할 수 없습니다
평가 보드

ADC3643EVM — ADC3643 듀얼, 14비트, 1MSPS~65MSPS, 저잡음, 초저전력 ADC 평가 모듈

ADC3643 평가 모듈(EVM)은 초저전력, 고선형성 ADC(아날로그-디지털 컨버터)인 ADC3643의 성능을 입증합니다. 온보드 전압 조정 및 유연한 아날로그 입력 옵션으로 여러 애플리케이션을 쉽게 평가할 수 있습니다.

전체적인 평가 시스템을 위해 TSW1400EVM 데이터 캡처 카드(별도 판매) 및 고속 데이터 컨버터 프로 소프트웨어(DATACERTERPRO-SW)를 사용합니다. FMC(FPGA 메자닌 카드) 커넥터를 통해 TSW1400EVM과 상호 작용하는 경우 실제 및 복잡한 데시메이션 모드를 포함하여 직렬 CMOS (...)

사용 설명서: PDF
TI.com에서 구매할 수 없습니다
평가 보드

ADC3644EVM — 듀얼 채널, 14비트, 25MSPS, 저잡음, 초저전력 ADC를 위한 ADC3644 평가 모듈

ADC3644 평가 모듈(EVM)은 초저전력, 높은 선형성 ADC3644의 성능을 보여주는 플랫폼입니다. 온보드 전압 조정 및 유연한 아날로그 입력 옵션으로 여러 애플리케이션을 쉽게 평가할 수 있습니다.

FMC(FPGA(필드 프로그래머블 게이트 어레이) 메자닌 카드) 커넥터를 통해 TSW1400EVM(별매)과 상호 작용하는 경우 실제 및 복잡한 데시메이션 모드를 포함하여 직렬 CMOS(보조 금속 산화물 반도체) 인터페이스의 데이터 캡처(최대 512MB)를 간편하게 평가할 수 있습니다.

사용 설명서: PDF
TI.com에서 구매할 수 없습니다
평가 보드

ADC3660EVM — ADC3660 듀얼, 16비트, 0.5MSPS~65MSPS, 저잡음, 초저전력 ADC 평가 모듈

ADC3662 평가 모듈(EVM)은 초저전력, 고선형성 ADC(아날로그-디지털 컨버터)인 ADC3662의 성능을 입증합니다. 온보드 전압 조정 및 유연한 아날로그 입력 옵션으로 여러 애플리케이션을 쉽게 평가할 수 있습니다.

종합적인 평가 시스템을 위해 TSW1400EVM 데이터 캡처 카드(별도 판매) 및 고속 데이터 컨버터 프로 소프트웨어(DATACERTERPRO-SW)를 사용합니다. FMC(FPGA 메자닌 카드) 커넥터를 통해 TSW1400EVM과 상호 작용하는 경우 실제 및 복잡한 데시메이션 모드를 포함하여 직렬 CMOS (...)

사용 설명서: PDF | HTML
TI.com에서 구매할 수 없습니다
평가 보드

TPS7A91EVM-831 — TPS7A91 아날로그용 1A 저잡음 낮은 Vin 저손실(LDO) 레귤레이터 평가 모듈

The TPS7A91EVM-831 evaluation module is designed for a typical configuration to evaluate the operation and performance of the TPS7A91, 1A high-accuracy, low dropout voltage regulator. The EVM circuit board is configured to be a reference design for engineering applications requiring current to a (...)
사용 설명서: PDF
TI.com에서 구매할 수 없습니다
시뮬레이션 모델

TPS7A9001 PSpice Transient Model

SBVM709.ZIP (92 KB) - PSpice Model
시뮬레이션 모델

TPS7A9001 Unencrypted PSpice Transient Model

SBVM710.ZIP (2 KB) - PSpice Model
레퍼런스 디자인

TIDA-01023 — 레이더 및 5G 무선 테스터용 다채널 JESD204B 데이지 체인 클록 생성 레퍼런스 설계

High-speed multi-channel applications require low noise and scalable clocking solutions capable of precise channel-to-channel skew adjustment to achieve optimal system SNR, SFDR, and ENOB. This reference design supports high channel count JESD204B synchronized clocks using one master and multiple (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01024 — 레이더 및 5G 무선 테스터용 다채널 JESD204B 데이지 체인 클록 레퍼런스 설계

High-speed multi-channel applications require low noise and scalable clocking solutions capable of precise channel-to-channel skew adjustment to achieve optimal system SNR, SFDR, and ENOB. This reference design supports scaling up JESD204B synchronized clocks in daisy chain configuration. This (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-010131 — 레이더 및 무선 5G 테스터용 멀티 채널 RF 트랜시버 클로킹 레퍼런스 설계

Analog front end for high-speed end equipments like phased-array radars, wireless communication testers, and electronic warfare require synchronized, multipletransceiver signal chains. Each transceiver signal chain includes high-speed, analog-to-digital converters (ADCs), digital-to-analog (...)
Design guide: PDF
회로도: PDF
패키지 다운로드
WSON (DSK) 10 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상