應用軟體及架構
產品規格表
DLPC410
- Operates the Following DLP® Chips:
- DLP650LNIR, DLP7000, DLP7000UV, DLP9500, and DLP9500UV DMDs
- DLPA200 DMD Micromirror Driver
- DLPR410 Configuration PROM
- Enables High Speed DMD Pattern Rates
- 1-Bit Binary Pattern Rates up to 32 kHz
- 8-Bit Monochrome Pattern Rates up to 4 kHz
- 400 MHz Input Data Clock Rates
- 64-Bit 2xLVDS Data Bus Interfaces In/Out
- Supports Random Row and LOAD4 DMD Addressing
- Compatible With a Variety of User Defined Processors or FPGAs
The DLPC410 is a digital controller that supports five DMD options: DLP650LNIR, DLP7000, DLP7000UV, DLP9500, and DLP9500UV. It is the convenient, high-speed data and control interface between the application electronics and the DMD. The DLPC410 provides DMD Mirror Clocking Pulses (Resets) and timing information to the DLPA200 DMD Micromirror Driver. The device is configured with firmware stored in the DLPR410 PROM.
This family of chipsets enables pixel data rates up to 48 Gigabits per second (Gbps) with the option for single, dual, quad, and global Resets. In addition, random row addressing and LOAD4 capabilities are offered. Often the family of chips is used when designing UV and NIR systems such as direct imaging lithography, 3D printing, and laser marking systems that need fast throughput and pixel accurate control.
In DLP-based electronics solutions, image data is 100% digital from the DLPC410 input port to the projected image. The image stays in digital form and is never converted into an analog signal. The DLPC410 processes the digital input image and converts the data into a format needed by the image on the DMD. The DMD then steers the light using binary pulse-width modulation (PWM) for each pixel mirror.
The DLPC410 is the DMD digital controller that controls the DLP650LNIR, DLP7000, DLP7000UV, DLP9500, and DLP9500UV DMDs (see Functional Block Diagram, Functional Block Diagram, and Functional Block Diagram). The DLPC410 provides developers easy access to the DMD as well as high speed, independent micromirror control. See the list of required chipset components for each DMD solution in Device Configurations table:
Reliable function and operation of the DLPC410 requires that it be used in conjunction with the other components of the chipset in DLPC410 Device Configurations table. For more information on the chipset components, see the data sheets in Related Documentation.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 11 設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
DLPLCR65NEVM — DLP650LNIR DMD 評估模組
This DLP evaluation module (EVM) houses DLP650LNIR, a 0.65 NIR WXGA Series 450 DMD intended for use in applications using 850-2000 nm near-infrared (NIR) illumination sources. DLPLCR65NEVM is an advanced imaging option for laser sintering, ablation, marking, coding, printing and other applications (...)
開發板
DLPLCR70EVM — DLP7000 DMD 評估板
This DLP evaluation module (EVM) houses DLP7000, a 0.7 XGA 2xLVDS Type A DMD containing 1076 x 768 micromirrors with 13.6 µm pitch. When paired with DLPLCRC410EVM, users get pixel accurate control with 1-bit pattern rates up to 32,225 Hz. DLPLCR70EVM is right evaluation choice for designers (...)
開發板
DLPLCR95EVM — DLP9500 DMD 評估板
This DLP evaluation module (EVM) houses DLP9500, a 0.95 1080p 2xLVDS Type-A DMD containing over two million micromirrors with 10.8 µm pitch. When paired with DLPLCRC410EVM, users get pixel accurate control with 1-bit pattern rates up to 23,148 Hz. DLPLCR95EVM is the right evaluation choice (...)
開發板
DLPLCRC410EVM — DLPLCRC410 評估模組
The DLPLCRC410EVM, paired with one of five other DMD-based EVMs, is an evaluation platform exhibiting advanced light control for applications like lithography, 3D Printing (SLS and SLA), Machine Vision, and Marking and Coding. This EVM enables evaluations of new customer illumination sources, (...)
開發板
OPTECKS-3P-DLP650LNIR-EVM — Optecks DLP650LNIR DMD 評估模組
The Optecks DLP650LNIR evaluation module (EVM) includes DLP650LNIR DMD, a 0.65" NIR WXA Series 450 DMD designed to be used in applications that operate in 850-2000 nm near-infrared (NIR) spectrum. Optecks DLP650LNIR EVM is an advanced imaging solution for laser sintering, ablation, marking, coding, (...)
開發板
DLI-3P-DLI41XX — 用於 DLP Discovery 晶片組的 DLi D4100、D4120、D4130 開發套件
DLi kits for DLP® Discovery™ chipsets (DLPC410 with DLP7000, DLP7000UV, DLP9500 or DLP9500UV DMDs) support custom interface development for industrial and medical systems and instrumentation. Choose among kit options based on desired hardware and software support. DLi4120 kits include (...)
開發板
VIALUX-3P-SUPER-410 — 適用於 DLPC410 的 ViALUX 超高速 V 模組
ViALUX 的 SuperSpeed V 模組提供完整子系統，內含 DLPC410 的控制器電路板、數位微型反射鏡元件 (DLP650LNIR、DLP7000、DLP7000UV、DLP9500、DLP9500UV 或 .96 WUXGA DMD) 及 ALP-4 控制器套件軟體。工業級模組支援高性能立即可用像素等級控制。這些 DLP® 子系統專爲新興應用而設計，配備功能豐富的編程介面，可在短時間內推出新產品。
DMD 板的精巧設計透過耦合兩個 PCB (而非只有一個) 邊緣的撓性導線連接，可減少組裝空間。此外，現在使用剛性撓性 PCB，允許撓性連接的角度佈線爲 90°。
(...)
來源：ViALUX
開發板
VISI-3P-LRS-HD-UV — Visitech LUXBEAM 快速系統 HD UV
The LUXBEAM® Rapid System LRS-HD is a DLP® technology based stereolithography sub-system, specifically designed for single head scrolling motion 3D printing and Additive Manufacturing systems. With the robust and reliable high resolution DLP9500 chip, the LRS-HD variants UV, Hybrid (HY), (...)
來源：VISITECH
開發板
VISI-3P-LRS-MCX-HD-UV — Visitech LUXBEAM 快速系統 MCx HD UV
Offering the same performance as the LRS-HD light engines, the LUXBEAM® Rapid System LRS-MCx offers stackability of modules for stitched images down to 50 micron pixel pitch in image. This allows for highest manufacturing throughput for 3D printing with single pass linear motion systems. (...)
來源：VISITECH
開發板
VISI-3P-LRS-MCX-WX-NIR — Visitech LUXBEAM 快速系統 NIR
As a new approach for polymer-based Powder Bed Fusion, VISITECH is introducing the LRS-MCx-WX light engine, providing unprecedented Near-IR power of more than 100 W in the projected 2D image. This is offering a path towards high productivity systems in Powder Bed Fusion as an alternative to (...)
來源：VISITECH
開發板
WDST-3P-W4100 — Wintech W4100 高速開發套件
The Wintech W4100 development kit provides users with an alternative to Texas Instruments DLP® Discovery™ 4100 development platform. It utilizes the same FPGA platform and same data interfaces for frame rates up to 32,552 Hz and grayscale operation. The W4100 is compatible with the (...)
光學模組
DLP-OMM-SEARCH — DLP® 產品第三方搜尋工具
To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
光學模組
OPTECKS-3P-RAY70 — 適用於 DLP7000 的 Optecks RAY 70A 光學模組
Optecks’ ray 70A optical module is designed for optimal image quality using a 0.7” diagonal digital micro-mirror device with a 4:3 aspect ratio such as the DLP7000. The monochromatic system combines the high resolution, high quality ray optical module with a high-power, (...)
來源：Optecks, LLC
光學模組
OPTECKS-3P-SPARKNIR — Optecks Telecentric NIR 光學引擎
The SPARK NIR telecentric optical engine is designed for the 0.65” digital micro-mirror devices with 16:9 aspect ratio such as the DLP650LNIR. All optical components have a high-quality anti-reflection (AR) coating within 600 - 1050 nm spectrum. The SPARK optical engine has the capability of (...)
來源：Optecks, LLC
光學模組
VIALUX-3P-DLP-070 — 適用於 DLP7000 的 VIALUX DLS 直接連結感測器
ViALUX's Direct Link 感測器為 DLP7000 提供的整合式光學與電子設計。DLS 模組可處理 3D 機械視覺應用實例，因該實例會要求耦合高性能 DLP 投影與精確同步影像擷取。DLS 概念克服了以前對圖案投影儀和相機的多個獨立設備的需求。DLS 在單一電子裝置中整合了 DLP 晶片和影像感測器。使用者定義投影序列，並在返回時接收對應的影像序列。
DLS API 啓用任何類型的模式序列，這些模式序列在位元深度、圖片數量和幀率方面可能會有差異。另外還有一個軟體套件 (zSn.dll)，用於高速和高精度的 3D 座標量測應用。這款功能強大的 3D 量測軟體是爲 ViALUX (...)
來源：ViALUX
光學模組
VIALUX-3P-STAR-070 — 用於 DLP7000 的 ViALUX STAR-070 光學模組
STAR-07 是高效能 DLP® 模式投影機系列，可提供不同波長。每個產品替代方案都具備經驗證的精巧光學元件、高功率 LED 光源、主動冷卻系統，以及各種不同的外殼。如果提出要求，且每個 LED 皆具有獨立驅動器，則也會提供 RGB 選項。STAR-07 以 0.7" DLP 格式為基礎，專爲工業和研究領域的高需求應用所設計。此產品隨附 ViALUX 的 ALP 控制器套件，此控制器套件是完整配置的高速 FPGA 邏輯和韌體。
來源：ViALUX
光學模組
VISI-3P-LITHOGRAPHY — VISITECH LUXBEAM 微影系統
LUXBEAM LITHOGRAPHY SYTEMS (LLS) is a sub system for direct imaging lithography machines including fully automated in-line machines for 24/7 manufacturing. The system comes with a documented interface and on-site support for easy hardware and software integration. Several photo head options are (...)
來源：VISITECH
光學模組
VISI-3P-LUXBEAM-RAPID — Visitech Luxbeam® 快速系統 LRS
The LUXBEAM RAPID SYSTEM LRS-UV/HY/VIS is a 3D printer subsystem with flexible build area and high throughput, high resolution manufacturing. It enables smart functions such as sub-pixelation (SPX) for resolution enhancement, and pixel power control (PPC) to equalize energy per pixel. It also (...)
來源：VISITECH
光學模組
VISI-3P-LUXBEAM4600 — VISITECH LUXBEAM 4600 DLP 格式器板
The LUXBEAM 4600 serves high-speed industrial applications requiring high resolution, fast frame rates, and single pixel control. It includes a DMD board connected with a flex cable and VISITECH’s LUXWARE firmware for memory management, sequencing and I/O signaling. The board also has a (...)
來源：VISITECH
光學模組
WDST-3P-PRO650NIR — Wintech PRO650NIR 高功率光刻頭
PRO650NIR 光刻頭整合了我們的 DLP650LNIR 0.65" WXGA DMD 和 DLPC410 晶片組。此晶片組可用於選擇層燒結 (包括尼龍應用)、動態雷射標記和工業列印應用。PRO650LNIR 使用 Wintech 提供的 1064-nm 或 976-nm 光纖雷射提供超過 100-W 的輸出，但客戶提供的雷射也可搭配內建 SMA905 光纖介面使用。現成的 47-um 像素可供於公司內部設計和製造自訂透鏡。此系統採用前側 DMD (氣體) 和液體冷卻進行散熱管理，每秒最高可達 10,000 個二進位訊框。
應用軟體及架構
OPTECKS-3P-LIGHT-ANIMATOR — 適用於 DLP 進階光學控制產品的 Optecks Light Animator 軟體
Optecks’ Light Animator is a software package with a visual interface that allows scientists and engineers to quickly design pattern sequences and triggering for light control applications using DLP® technology. Light Animator supports the DLP LightCrafter 6500, DLP Discovery 4100 and DLP (...)
來源：Optecks, LLC
應用軟體及架構
VIALUX-3P-ALP-4 — 用於 DLPLCRC410 的 ViALUX ALP-4.1 控制器軟體套件評估模組
ViALUX’ ALP-4.1 is an accessory software package compatible with the DLPLCRC410 evaluation module from Texas Instruments. It supports the built-in hardware components and contains the corresponding driver and controller firmware as well as ViALUX’ FPGA logic design for the EVM board. (...)
來源：ViALUX
開發模組 (EVM) 的 GUI
DLPC104 — DLP Discovery 4100 Explorer GUI
支援產品和硬體
產品
近紫外線產品 (400 至 420 nm)
硬體開發
開發板
光學模組
支援軟體
DLPC134 — DLP(R) Discovery 4100 Applications FPGA Pattern Generator Source Code version 2.
支援產品和硬體
產品
近紫外線產品 (400 至 420 nm)
硬體開發
開發板
光學模組
設計工具
DLI-3P-ACCESSORIES — 適用於 DLP® 產品的 DLi 配件和組件
Digital Light Innovations (DLi) offers accessories, boards, and assemblies for development and production with DLP® Products. Examples include DMD controller boards, DMD board assemblies, flex cables, DMD mounting hardware assemblies, LED driver boards, and LED & fiber illumination assemblies.
- (...)
模擬工具
DLPR410-IBIS — DLPR410 IBIS 機型
IBIS file for the DLPR410 PROM device which supports the DLPC410, DLP650LNIR, DLP7000, DLP7000UV, DLP9500 and DLP9500UV.
來源：Xilinx
| 封裝 | 引腳 | 下載 |
|---|---|---|
| DLP (DLP) | 676 | 檢視選項 |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。