SBASB68 August   2025 ADS9803

PRODMIX  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Timing Requirements
    7. 5.7 Switching Characteristics
    8. 5.8 Timing Diagrams
    9. 5.9 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Analog Inputs
        1. 6.3.1.1 Input Clamp Protection Circuit
        2. 6.3.1.2 Programmable Gain Amplifier (PGA)
        3. 6.3.1.3 Wide-Common-Mode Voltage Rejection Circuit
      2. 6.3.2 ADC Transfer Function
      3. 6.3.3 ADC Sampling Clock Input
      4. 6.3.4 Synchronizing Multiple ADCs
      5. 6.3.5 Reference Voltage
      6. 6.3.6 Data Interface
        1. 6.3.6.1 Data Clock Output
        2. 6.3.6.2 ADC Output Data Randomizer
        3. 6.3.6.3 Data Averaging
        4. 6.3.6.4 Test Patterns for Data Interface
          1. 6.3.6.4.1 Fixed Pattern
          2. 6.3.6.4.2 Digital Ramp
          3. 6.3.6.4.3 Alternating Test Pattern
    4. 6.4 Device Functional Modes
      1. 6.4.1 Reset
      2. 6.4.2 Power-Down
      3. 6.4.3 Initialization Sequence
      4. 6.4.4 Normal Operation
      5. 6.4.5 Speed-Boost Mode
    5. 6.5 Programming
      1. 6.5.1 Register Write
      2. 6.5.2 Register Read
      3. 6.5.3 Multiple Devices in a Daisy-Chain Topology for SPI Configuration
        1. 6.5.3.1 Register Write With Daisy-Chain
        2. 6.5.3.2 Register Read With Daisy-Chain
  8. 7 Register Map
    1. 7.1 Register Bank 0
    2. 7.2 Register Bank 1
    3. 7.3 Register Bank 2
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Parametric Measurement Unit (PMU)
      2. 8.2.2 Design Requirements
      3. 8.2.3 Detailed Design Procedure
      4. 8.2.4 Application Curve
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. 9 Device and Documentation Support
    1. 9.1 Receiving Notification of Documentation Updates
    2. 9.2 Support Resources
    3. 9.3 Trademarks
    4. 9.4 Electrostatic Discharge Caution
    5. 9.5 Glossary
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

6.3.5 Reference Voltage

The ADS9803 has a precision, low-drift voltage reference internal to the device. For best performance, the internal reference noise is filtered (as shown in Figure 6-6) by connecting a 10µF ceramic bypass capacitor to the REFIO pin. As shown in Figure 6-7, an external reference is also connected at the REFIO pin. When using an external reference, disable the internal reference voltage by either of the following two options:

  • Configure the SPI (SPI_EN pin = logic 1). Write PD_REF = 1b in address 0xC1 of register bank 1.
  • Use the SDI/EXTREF pin (SPI_EN pin = logic 0). Set the SDI/EXTREF pin to logic 0 using a pulldown resistor.

ADS9801 ADS9803 Internal Reference Voltage Figure 6-6 Internal Reference Voltage
ADS9801 ADS9803 External Reference Voltage Figure 6-7 External Reference Voltage