For applications where the drain slew rate is programmed for
greater than a typical 100 V/ns (RRDRV
< 10 kΩ or VRDRV
= 5 V), the
following application design modifications must be implemented to minimize the risk of LDO5V
- Remove C2.
- Put a 10-Ω resistor between the U1
LDO5V pin and C10. No other components must be between the resistor and the U1 LDO5V
- Remove C12.
- Put a 10-Ω resistor between the U2
LDO5V pin and C27. No other components must be between the resistor and the U2 LDO5V