Product details

RDS (on) (Milliohm) 30 VDS (Max) (V) 600 ID (Max) (A) 55 Rating Catalog
RDS (on) (Milliohm) 30 VDS (Max) (V) 600 ID (Max) (A) 55 Rating Catalog
  • Qualified for JEDEC JEP180 for hard-switching topologies
  • 600-V GaN-on-Si FET with Integrated gate driver
    • Integrated high precision gate bias voltage
    • 200-V/ns CMTI
    • 2.2-MHz switching frequency
    • 30-V/ns to 150-V/ns slew rate for optimization of switching performance and EMI mitigation
    • Operates from 7.5-V to 18-V supply
  • Robust protection
    • Cycle-by-cycle overcurrent and latched short-circuit protection with < 100-ns response
    • Withstands 720-V surge while hard-switching
    • Self-protection from internal overtemperature and UVLO monitoring
  • Advanced power management
    • Digital temperature PWM output
    • Ideal diode mode reduces third-quadrant losses in LMG3425R030
  • Qualified for JEDEC JEP180 for hard-switching topologies
  • 600-V GaN-on-Si FET with Integrated gate driver
    • Integrated high precision gate bias voltage
    • 200-V/ns CMTI
    • 2.2-MHz switching frequency
    • 30-V/ns to 150-V/ns slew rate for optimization of switching performance and EMI mitigation
    • Operates from 7.5-V to 18-V supply
  • Robust protection
    • Cycle-by-cycle overcurrent and latched short-circuit protection with < 100-ns response
    • Withstands 720-V surge while hard-switching
    • Self-protection from internal overtemperature and UVLO monitoring
  • Advanced power management
    • Digital temperature PWM output
    • Ideal diode mode reduces third-quadrant losses in LMG3425R030

The LMG342xR030 GaN FET with integrated driver and protection enables designers to achieve new levels of power density and efficiency in power electronics systems.

The LMG342xR030 integrates a silicon driver that enables switching speed up to 150 V/ns. TI’s integrated precision gate bias results in higher switching SOA compared to discrete silicon gate drivers. This integration, combined with TI’s low-inductance package, delivers clean switching and minimal ringing in hard-switching power supply topologies. Adjustable gate drive strength allows control of the slew rate from 20 V/ns to 150 V/ns, which can be used to actively control EMI and optimize switching performance. The LMG3425R030 includes ideal diode mode, which reduces third-quadrant losses by enabling adaptive dead-time control.

Advanced power management features include digital temperature reporting and fault detection. The temperature of the GaN FET is reported through a variable duty cycle PWM output, which simplifies managing device loading. Faults reported include overtemperature, overcurrent, and UVLO monitoring.

The LMG342xR030 GaN FET with integrated driver and protection enables designers to achieve new levels of power density and efficiency in power electronics systems.

The LMG342xR030 integrates a silicon driver that enables switching speed up to 150 V/ns. TI’s integrated precision gate bias results in higher switching SOA compared to discrete silicon gate drivers. This integration, combined with TI’s low-inductance package, delivers clean switching and minimal ringing in hard-switching power supply topologies. Adjustable gate drive strength allows control of the slew rate from 20 V/ns to 150 V/ns, which can be used to actively control EMI and optimize switching performance. The LMG3425R030 includes ideal diode mode, which reduces third-quadrant losses by enabling adaptive dead-time control.

Advanced power management features include digital temperature reporting and fault detection. The temperature of the GaN FET is reported through a variable duty cycle PWM output, which simplifies managing device loading. Faults reported include overtemperature, overcurrent, and UVLO monitoring.

Download

Similar products you might be interested in

open-in-new Compare products
Pin-for-pin with same functionality to the compared device.
LMG3425R030 PREVIEW 600-V 30-mΩ GaN FET with integrated driver, protection, temperature reporting and ideal diode mode Same on-resistance with ideal diode mode functionality
Same functionality with different pin-out to the compared device.
NEW LMG3522R030-Q1 PREVIEW Automotive 650-V 30-mΩ GaN FET with integrated driver, protection and temperature reporting Automotive grade, same on-resistance, with top-side cooling
Similar functionality to the compared device.
LMG3422R050 PREVIEW 600-V 50-mΩ GaN FET with integrated driver, protection and temperature reporting Same functionality with different on-resistance
NEW LMG3525R030-Q1 PREVIEW Automotive 650-V 30-mΩ GaN FET with integrated driver, protection, temp. reporting, ideal diode mode Automotive grade, same on-resistance, with top-side cooling and with ideal diode mode functionality

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

LMG342X-BB-EVM — LMG342x GaN system-level evaluation motherboard for LMG342x Family

The LMG342X-BB-EVM is an easy to use breakout board to configure any LMG342xR0x0 half bridge boards, such as the LMG3422EVM-043, as a synchronous buck converter. By providing a power stage, bias power and logic circuitry this EVM allows for quick measurements of the GaN device switching. This EVM (...)
In stock
Limit: 5
Daughter card

LMG3422EVM-043 — LMG3422R030 600-V 30-mΩ half-bridge daughter card

LMG3422EVM-043 configures two LMG3422R030 GaN FETs in a half-bridge with the latched over current protection function and all the necessary auxiliary peripheral circuitry. This EVM is designed to work in conjunction with larger systems.
In stock
Limit: 5
Simulation model

LMG3422R030 Unencrypted PSpice Model Package

SNOM704.ZIP (12 KB) - PSpice Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Reference designs

TIDA-010203 — 4-kW single-phase totem pole PFC reference design with C2000 and GaN

This reference design is a 4-kW CCM totem-pole PFC with F280049/F280025 control card and LMG342x EVM board. This design demos a robust PFC solution, which avoids isolated current sense by putting the controller's ground in the middle of a MOSFET leg. Benefitting from non-isolation, AC current (...)
Package Pins Download
(RQZ) 54 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos