SLOS447 Data sheet

SLOS447J September 2004 – June 2025 LMV341 , LMV342 , LMV344

PRODUCTION DATA

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)

D|8
DGK|8

Thermal pad, mechanical data (Package|Pins)

Orderable Information

5.5 Electrical Characteristics: V₊ = 2.7V

V₊ = 2.7V, GND = 0V, V_IC = V_O = V₊/2, R_L > 1MΩ (unless otherwise noted)

PARAMETER		TEST CONDITIONS		T_A	MIN	TYP⁽¹⁾	MAX	UNIT
V_IO	Input offset voltage			25°C		0.25	4	mV
V_IO	Input offset voltage			Full range			4.5	mV
α_VIO	Average temperature coefficient of input offset voltage			Full range		1.7		μV/°C
I_IB	Input bias current			25°C		1	120	pA
				–40°C to 85°C			250	pA
				–40°C to 125°C			3	nA
I_IO	Input offset current			25°C		6.6		fA
CMRR	Common-mode rejection ratio	0 ≤ V_ICR ≤ 1.7V		25°C	56	80		dB
CMRR	Common-mode rejection ratio	0 ≤ V_ICR ≤ 1.6V		Full range	50			dB
k_SVR	Supply-voltage rejection ratio	2.7V ≤ V₊ ≤ 5V		25°C	65	82		dB
k_SVR	Supply-voltage rejection ratio	2.7V ≤ V₊ ≤ 5V		Full range	60			dB
V_ICR	Common-mode input voltage range	Lower range, CMRR ≥ 50dB		25°C		–0.2	0	V
V_ICR	Common-mode input voltage range	Upper range, CMRR ≥ 50dB		25°C	1.7	1.9		V
A_V	Large-signal voltage gain⁽²⁾	R_L = 10kΩ to 1.35V		25°C	78	113		dB
		R_L = 10kΩ to 1.35V		Full range	70
		R_L = 2kΩ to 1.35V		25°C	72	103
		R_L = 2kΩ to 1.35V		Full range	64
V_O	Output swing (delta from supply rails)	R_L = 2kΩ to 1.35V	Low level	25°C		24	60	mV
			Low level	Full range			95
			High level	25°C		26	60
			High level	Full range			95
		R_L = 10kΩ to 1.35V	Low level	25°C		5	30
			Low level	Full range			40
			High level	25°C		5.3	30
			High level	Full range			40
I_CC	Supply current (per channel)			25°C		150	200	μA
I_CC	Supply current (per channel)			Full range			230	μA
I_OS	Output short-circuit current	Sourcing	LMV341, LMV342	25°C	20	32		mA
		Sourcing	LMV344		18	24
		Sinking			15	24
SR	Slew rate	R_L = 10kΩ⁽³⁾		25°C		1		V/μs
GBM	Unity-gain bandwidth	R_L = 10kΩ, C_L = 200pF		25°C		1		MHz
Φ_m	Phase margin	R_L = 100kΩ		25°C		72		°
G_m	Gain margin	R_L = 100kΩ		25°C		20		dB
V_n	Equivalent input noise voltage	f = 1kHz		25°C		40		nV/√ Hz
I_n	Equivalent input noise current	f = 1kHz		25°C		0.001		pA/√ Hz
THD	Total harmonic distortion	f = 1kHz, A_V = 1, R_L = 600Ω, V_I = 1 V_PP		25°C		0.017%

(1) Typical values represent the most likely parametric norm.

(2) GND + 0.2V ≤ V_O ≤ V₊ – 0.2V

(3) Connected as voltage follower with 2V_PP step input. Number specified is the slower of the positive and negative slew rates.

Package Options

Mechanical Data (Package|Pins)

Thermal pad, mechanical data (Package|Pins)

Orderable Information

5.5 Electrical Characteristics: V+ = 2.7V

5.5 Electrical Characteristics: V₊ = 2.7V