SLVSCO4D July 2015 – February 2019 TPS65917-Q1
The TPS65917-Q1 standard I2C 7-bit slave device address is set to 010010xx (binary) where the two least-significant bits are used for page selection.
The device is organized in five internal pages of 256 bytes (registers) as follows:
The device address for the DVS I2C interface is set to 0x12.
If one of the addresses conflicts with another device I2C address, remapping each address to a fixed alternative address is possible as listed in Table 5-13. The I2C for DVS is fixed because it is a dedicated interface.
|I2C_SPI||ID_I2C1||Power registers||ID_I2C1 = 0: 0x48|
|ID_I2C1 = 1: 0x58|
|ID_I2C1||Interfaces and auxiliaries||ID_I2C1 = 0: 0x49|
|ID_I2C1 = 1: 0x59|
|ID_I2C1||Trimming and test||ID_I2C1 = 0: 0x4A|
|ID_I2C1 = 1: 0x5A|
|ID_I2C1||OTP||ID_I2C1 = 0: 0x4B|
|ID_I2C1 = 1: 0x5B|
|ID_IDC2||DVS||ID_I2C2 = 0: 0x12|