SBVS263B July   2017  – June 2025 TPS7A39

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Start-Up Characteristics
    7. 5.7 Timing Diagram
    8. 5.8 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Voltage Regulation
        1. 6.3.1.1 DC Regulation
        2. 6.3.1.2 AC and Transient Response
      2. 6.3.2 User-Settable Buffered Reference
      3. 6.3.3 Active Discharge
      4. 6.3.4 System Start-Up Controls
        1. 6.3.4.1 Start-Up Tracking
        2. 6.3.4.2 Sequencing
          1. 6.3.4.2.1 Enable (EN)
          2. 6.3.4.2.2 Undervoltage Lockout (UVLO) Control
    4. 6.4 Device Functional Modes
      1. 6.4.1 Normal Operation
      2. 6.4.2 Dropout Operation
      3. 6.4.3 Disabled
  8. 7 Application and Implementation
    1. 7.1 Application Information
      1. 7.1.1  Setting the Output Voltages on Adjustable Devices
      2. 7.1.2  Capacitor Recommendations
      3. 7.1.3  Input and Output Capacitor (CINx and COUTx)
      4. 7.1.4  Feed-Forward Capacitor (CFFx)
      5. 7.1.5  Noise-Reduction and Soft-Start Capacitor (CNR/SS)
      6. 7.1.6  Buffered Reference Voltage
      7. 7.1.7  Overriding Internal Reference
      8. 7.1.8  Start-Up
        1. 7.1.8.1 Soft-Start Control (NR/SS)
          1. 7.1.8.1.1 In-Rush Current
        2. 7.1.8.2 Undervoltage Lockout (UVLOx) Control
      9. 7.1.9  AC and Transient Performance
        1. 7.1.9.1 Power-Supply Rejection Ratio (PSRR)
        2. 7.1.9.2 Channel-to-Channel Output Isolation and Crosstalk
        3. 7.1.9.3 Output Voltage Noise
        4. 7.1.9.4 Optimizing Noise and PSRR
        5. 7.1.9.5 Load Transient Response
      10. 7.1.10 DC Performance
        1. 7.1.10.1 Output Voltage Accuracy (VOUT x)
        2. 7.1.10.2 Dropout Voltage (VDO)
      11. 7.1.11 Reverse Current
      12. 7.1.12 Power Dissipation (PD)
        1. 7.1.12.1 Estimating Junction Temperature
    2. 7.2 Typical Applications
      1. 7.2.1 Design 1: Single-Ended to Differential Isolated Supply
        1. 7.2.1.1 Design Requirements
        2. 7.2.1.2 Detailed Design Procedure
          1. 7.2.1.2.1 Switcher Choice
          2. 7.2.1.2.2 Full Bridge Rectifier With Center-Tapped Transformer
          3. 7.2.1.2.3 Total Solution Efficiency
          4. 7.2.1.2.4 Feedback Resistor Selection
        3. 7.2.1.3 Application Curves
      2. 7.2.2 Design 2: Getting the Full Range of a SAR ADC
        1. 7.2.2.1 Design Requirements
        2. 7.2.2.2 Detailed Design Procedure
        3. 7.2.2.3 Detailed Design Description
          1. 7.2.2.3.1 Regulation of –0.2V
          2. 7.2.2.3.2 Feedback Resistor Selection
        4. 7.2.2.4 Application Curves
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
        1. 7.4.1.1 Board Layout Recommendations to Improve PSRR and Noise Performance
        2. 7.4.1.2 Package Mounting
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 Device Support
      1. 8.1.1 Development Support
        1. 8.1.1.1 Evaluation Modules
        2. 8.1.1.2 Spice Models
    2. 8.2 Documentation Support
      1. 8.2.1 Related Documentation
    3. 8.3 Receiving Notification of Documentation Updates
    4. 8.4 Support Resources
    5. 8.5 Trademarks
    6. 8.6 Electrostatic Discharge Caution
    7. 8.7 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

7.1.2 Capacitor Recommendations

The device is designed to be stable using low equivalent series resistance (ESR) ceramic capacitors at the input and output pins. The device is also designed to be stable with aluminum polymer and tantalum polymer capacitors with ESR < 75mΩ.

Electrolytic capacitors (along with higher ESR polymer capacitors) can also be used if capacitors (meeting the minimum capacitance and ESR requirements ) are used in parallel.

Take the effective ESR for stability when the impedance of the capacitor is at minimum. At the minimum level, the capacitance and parasitic inductance cancel each other and provides the DC ESR.

Ceramic capacitors that employ X7R-, X5R-, and COG-rated dielectric materials provide relatively good capacitive stability across temperature, whereas the use of Y5V-rated capacitors is discouraged because of large variations in capacitance.

Regardless of the ceramic capacitor type selected, ceramic capacitance varies with operating voltage and temperature. As a rule of thumb, derate ceramic capacitors by at least 50%. The input and output capacitors recommended herein account for an effective capacitance derating of approximately 50%, but at higher VIN and VOUT conditions (that is, VIN = 5.5V to VOUT = 5.0V) the derating can be greater than 50% and must be taken into consideration.

For high performance applications polymer capacitors are ideal as they do not experience the large deratings of ceramic capacitors.