SWRA466D February 2015 – August 2021 CC1310 , CC1310 , CC1352R , CC1352R , CC2538 , CC2538 , CC2620 , CC2620 , CC2630 , CC2630 , CC2640 , CC2640 , CC2640R2F , CC2640R2F , CC2640R2F-Q1 , CC2640R2F-Q1 , CC2642R , CC2642R , CC2642R-Q1 , CC2642R-Q1 , CC2650 , CC2650 , CC2650MODA , CC2650MODA , CC2652R , CC2652R , CC2652R7 , CC2652R7 , CC2652RB , CC2652RB , CC2652RSIP , CC2652RSIP
To run the firmware after it has been written and verified, the SBL function reset has to be used. The reset function sends the CMD_RESET command to the bootloader to invoke a reset. The connection between the host and the device will break after the CMD_RESET command has been sent and an ACK has been received from the bootloader. The sequence chart for the reset function can be observed in Figure 4-8.