SBASAX3B May   2025  – April 2026 ADS9326 , ADS9327

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Device Comparison
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Thermal Information
    4. 6.4  Recommended Operating Conditions
    5. 6.5  Electrical Characteristics 
    6. 6.6  Electrical Characteristics: AVDD = 5V
    7. 6.7  Electrical Characteristics: AVDD = 3.3V
    8. 6.8  Timing Requirements
    9. 6.9  Switching Characteristics
    10. 6.10 Timing Diagrams
    11. 6.11 Typical Characteristics
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Analog Inputs
      2. 7.3.2 Reference
        1. 7.3.2.1 Internal Reference
          1. 7.3.2.1.1 Selectable Internal Reference with 5V AVDD
        2. 7.3.2.2 External Reference
        3. 7.3.2.3 External Reference With External Reference Buffer
      3. 7.3.3 Burst Sample Operation
      4. 7.3.4 ADC Transfer Function
      5. 7.3.5 Programmable Data Averaging Filter
        1. 7.3.5.1 Simple Average
          1. 7.3.5.1.1 Simple Average with Noncontinuous CONVST
        2. 7.3.5.2 Moving Average
      6. 7.3.6 Channel Averaging
      7. 7.3.7 Common-Mode Voltage Output
      8. 7.3.8 CRC on Output Data Interface
      9. 7.3.9 ADC Output Data Randomizer
    4. 7.4 Device Functional Modes
      1. 7.4.1 Reset
      2. 7.4.2 Normal Operation
      3. 7.4.3 Low-Latency Mode
      4. 7.4.4 CS-CONVST Short Mode
      5. 7.4.5 Register Read Mode
      6. 7.4.6 Initialization Sequence
    5. 7.5 Programming
      1. 7.5.1  Data Interface
      2. 7.5.2  Data Frame Width
      3. 7.5.3  SPI Modes
      4. 7.5.4  CONVST Inversion
      5. 7.5.5  SCLK Echo Mode
      6. 7.5.6  Daisy-Chain Mode
      7. 7.5.7  SPI Frame Length for Register Operations
      8. 7.5.8  Register Map Lock
      9. 7.5.9  Register Write
      10. 7.5.10 Register Read
  9. 8 Register Map
    1. 8.1 Register Bank 0
    2. 8.2 Register Bank 1
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Analog 1VPP Sine-Cosine Encoder Interface
      2. 9.2.2 Design Requirements
      3. 9.2.3 Detailed Design Procedure
    3. 9.3 Power Supply Recommendations
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
      2. 9.4.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 Related Documentation
    2. 10.2 Receiving Notification of Documentation Updates
    3. 10.3 Support Resources
    4. 10.4 Trademarks
    5. 10.5 Electrostatic Discharge Caution
    6. 10.6 Glossary
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information
    1. 12.1 Mechanical Data

7.5.2 Data Frame Width

The ADS932x supports 16-bit, 20-bit, and 24-bit data frame width options. The default output data frame width is 16 bits. As shown in Table 7-11, the output data frame width increases to 20 or 24 bits depending on the use of averaging, XOR, and CRC.

Table 7-11 Output Data Frames
CRC_EN SAVG_EN XOR_EN OUTPUT WIDTH (Bits) OUTPUT DATA FRAME
CRC module disabled No averaging XOR disabled 16 {Conversion result [15:0]}
XOR enabled 20 {Conversion result [15:0], PRBS[3:0]}
Averaging enabled XOR disabled 20 {Conversion result [17:0], 0b00}
XOR enabled 24 {Conversion result [17:0], PRBS[3:0], 0b00}
CRC module enabled No averaging XOR disabled 24 {Conversion result [15:0], CRC[7:0]}
XOR enabled N/A Not supported
Averaging enabled XOR disabled N/A Not supported
XOR enabled N/A Not supported