SBAU470 June   2026

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
    5. 1.5 Getting Started With the ADS124S18EVM
  8. 2Hardware
    1. 2.1 Analog and Digital Power Supplies
    2. 2.2 Analog Input Connections
    3. 2.3 Digital Signal and Connection
    4. 2.4 Serial Interface
    5. 2.5 EEPROM
    6. 2.6 Connecting to an External Controller
  9. 3Software
    1. 3.1 Software Description
    2. 3.2 ADS124S18EVM Software Installation
    3. 3.3 Device Manager Check
  10. 4EVM Operation and Implementation Results
    1. 4.1 Evaluation Setup
    2. 4.2 ADC Capture Settings
    3. 4.3 Register Configurations
    4. 4.4 Time Domain Display
    5. 4.5 Spectral Analysis Display
    6. 4.6 Histogram Analysis Display
  11. 5Hardware Design Files
    1. 5.1 Schematics
    2. 5.2 PCB Layouts
    3. 5.3 Bill of Materials (BOM)
  12. 6Additional Information
    1. 6.1 Trademarks
  13. 7Related Documentation
    1. 7.1 Supplemental Content

3.3 Device Manager Check

Check the device manager and verify that the driver is properly installed on the computer as shown in Figure 3-2. The actual port number for the communication depends on the computer.

ADS124S18EVM-PDK Check the Device Manager for the GUI InstallationFigure 3-2 Check the Device Manager for the GUI Installation