SBOS576C May   2012  – September 2025 INA3221

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Device Comparison Table
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Typical Characteristics
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Basic ADC Functions
      2. 7.3.2 Alert Monitoring
        1. 7.3.2.1 Critical Alert
          1. 7.3.2.1.1 Summation Control Function
        2. 7.3.2.2 Warning Alert
        3. 7.3.2.3 Power-Valid Alert
        4. 7.3.2.4 Timing-Control Alert
        5. 7.3.2.5 Default Settings
      3. 7.3.3 Software Reset
    4. 7.4 Device Functional Modes
      1. 7.4.1 Averaging Function
      2. 7.4.2 Multiple Channel Monitoring
        1. 7.4.2.1 Channel Configuration
        2. 7.4.2.2 Averaging and Conversion-Time Considerations
      3. 7.4.3 Filtering and Input Considerations
    5. 7.5 Programming
      1. 7.5.1 Bus Overview
        1. 7.5.1.1 Serial Bus Address
        2. 7.5.1.2 Serial Interface
      2. 7.5.2 Writing To and Reading From the INA3221
        1. 7.5.2.1 High-Speed I2C Mode
      3. 7.5.3 SMBus Alert Response
    6. 7.6 Register Maps
      1. 7.6.1 Summary of Register Set
      2. 7.6.2 Register Descriptions
        1. 7.6.2.1  Configuration Register (address = 00h) [reset = 7127h]
        2. 7.6.2.2  Channel-1 Shunt-Voltage Register (address = 01h), [reset = 00h]
        3. 7.6.2.3  Channel-1 Bus-Voltage Register (address = 02h) [reset = 00h]
        4. 7.6.2.4  Channel-2 Shunt-Voltage Register (address = 03h) [reset = 00h]
        5. 7.6.2.5  Channel-2 Bus-Voltage Register (address = 04h) [reset = 00h]
        6. 7.6.2.6  Channel-3 Shunt-Voltage Register (address = 05h) [reset = 00h]
        7. 7.6.2.7  Channel-3 Bus-Voltage Register (address = 06h) [reset = 00h]
        8. 7.6.2.8  Channel-1 Critical-Alert Limit Register (address = 07h) [reset = 7FF8h]
        9. 7.6.2.9  Warning-Alert Channel-1 Limit Register (address = 08h) [reset = 7FF8h]
        10. 7.6.2.10 Channel-2 Critical-Alert Limit Register (address = 09h) [reset = 7FF8h]
        11. 7.6.2.11 Channel-2 Warning-Alert Limit Register (address = 0Ah) [reset = 7FF8h]
        12. 7.6.2.12 Channel-3 Critical-Alert Limit Register (address = 0Bh) [reset = 7FF8h]
        13. 7.6.2.13 Channel-3 Warning-Alert Limit Register (address = 0Ch) [reset = 7FF8h]
        14. 7.6.2.14 Shunt-Voltage Sum Register (address = 0Dh) [reset = 00h]
        15. 7.6.2.15 Shunt-Voltage Sum-Limit Register (address = 0Eh) [reset = 7FFEh]
        16. 7.6.2.16 Mask/Enable Register (address = 0Fh) [reset = 0002h]
        17. 7.6.2.17 Power-valid Upper-limit Register (address = 10h) [reset = 2710h]
        18. 7.6.2.18 Power-Valid Lower-Limit Register (address = 11h) [reset = 2328h]
        19. 7.6.2.19 Manufacturer ID Register (address = FEh) [reset = 5449h]
        20. 7.6.2.20 Die ID Register (address = FFh) [reset = 3220]
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curves
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. 9 Device and Documentation Support
    1. 9.1 Device Support
      1. 9.1.1 Development Support
    2. 9.2 Documentation Support
      1. 9.2.1 Related Documentation
    3. 9.3 Receiving Notification of Documentation Updates
    4. 9.4 Support Resources
    5. 9.5 Trademarks
    6. 9.6 Electrostatic Discharge Caution
    7. 9.7 Glossary
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information
7.3.2.1.1 Summation Control Function

The INA3221 also allows the Critical alert pin to be controlled by the summation control function. This function adds the single shunt-voltage conversions for the desired channels (set by SCC1-3 in the Mask/Enable register) to compare the combined sum to the programmed limit.

The SCC bits either disable the summation control function or allow the summation control function to switch between including two or three channels in the Shunt-Voltage Sum register. The Shunt-Voltage Sum Limit register contains the programmed value that is compared to the value in the Shunt-Voltage Sum register to determine if the total summed limit is exceeded. If the shunt-voltage sum limit value is exceeded, the Critical alert pin pulls low. Either the summation alert flag indicator bit (SF) or the individual critical alert limit bits (CF1-3) in the Mask/Enable register determine the source of the alert when the Critical alert pin pulls low.

For the summation limit to have a meaningful value, use the same shunt-resistor value on all included channels. Unless equal shunt-resistor values are used for each channel, do not use this function to add the individual conversion values directly together in the Shunt-Voltage Sum register to report the total current.