SBOU211A October   2018  – July 2025 INA105 , INA106 , INA132 , INA134 , INA137 , INA143 , INA152 , INA154 , INA157 , INA333 , INA592 , INA600

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 General Texas Instruments High Voltage Evaluation (TI HV EMV) User Safety Guidelines
    3. 1.3 Features
    4. 1.4 Diff-amp Pinout
    5. 1.5 Compatible Devices
  7. 2Hardware
    1. 2.1 Power
    2. 2.2 Inputs
    3. 2.3 Output
      1. 2.3.1 Output Filtering
    4. 2.4 Reference
    5. 2.5 Miscellaneous
    6. 2.6 Configurations
      1. 2.6.1 Difference Amplifiers (SOIC-8 and VSSOP-8)
      2. 2.6.2 Difference Amplifiers (SOT23 and SOT-SC70)
      3. 2.6.3 Reference Amplifier
        1. 2.6.3.1 Buffered Reference Voltage Connection
        2. 2.6.3.2 AC Coupled Output
  8. 3Hardware Design Files
    1. 3.1 Schematic
    2. 3.2 PCB Layout
    3. 3.3 Bill of Materials (BOM)
  9. 4Additional Information
    1. 4.1 Trademarks
    2. 4.2 Related Documentation
  10. 5Revision History

2.1 Power

Power is applied to the device with test points VCC and VEE. These test points power both the socketed diff-amp and the onboard reference amplifier. The board is initially populated at U1 with an OPA207 as the reference amplifier, but if a different device is used then take care that the new device can operate with the same supply as the diff-amp.