SDAA489 August   2026 TMCS2100-Q1

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
  5. 2Quick-Start Design Checklist
  6. 3Bus Bar Design
    1. 3.1 Straight Bus Bar
    2. 3.2 Bus Bars with a Bend
  7. 4Surrounding Conductors / Magnetic Materials
    1. 4.1 Straight Bus Bar
    2. 4.2 Bus Bars with a Bend
    3. 4.3 Ambient Fields
  8. 5PCB Cutouts
  9. 6Device Placement
    1. 6.1 Field Strength
      1. 6.1.1 Distance from Bus Bar to Sensor
      2. 6.1.2 Sensor-to-Sensor Spacing
      3. 6.1.3 Full-Scale Range and Device Gain Variants
        1. 6.1.3.1 Device Gain Variants
        2. 6.1.3.2 Full-Scale Range
        3. 6.1.3.3 Plot Similarities
      4. 6.1.4 Gain Considerations
  10. 7Simulation Tools
    1. 7.1 DC Simulation Tool
    2. 7.2 AC Simulation Tool
  11. 8Characterization Requirements
  12. 9References

Simulation Tools

The design guidelines outlined in this document represent best practices for minimizing errors, but they cannot predict the unique electromagnetic environment of a specific system. Bus bar material properties, PCB stack-up details, proximity of other conductors, and thermal management structures all influence the final system performance. Therefore simulations are recommended.

Both of the simulation tools described here are located on the TMCS2100CHAREVM product page.