SLLU371 November   2024

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
  5. 2Getting Started
    1. 2.1 Installation
    2. 2.2 Open Design
    3. 2.3 Configure Hardware
    4. 2.4 Simulate
      1. 2.4.1 Adjust Simulation Inputs
    5. 2.5 Getting Help
      1. 2.5.1 In Tool Help
      2. 2.5.2 Out of Tool Help
  6. 3Home Page
    1. 3.1 About
    2. 3.2 Open an Existing Design
    3. 3.3 Recent Designs
    4. 3.4 Quick Links
    5. 3.5 Update
    6. 3.6 Start a New Design
      1. 3.6.1 Reference Designs
  7. 4Workspace
    1. 4.1 Menus
      1. 4.1.1 File Button
      2. 4.1.2 About
      3. 4.1.3 Restart
      4. 4.1.4 Window Selection
      5. 4.1.5 Elements List
      6. 4.1.6 Static Buttons
      7. 4.1.7 Workspace Toolbar
    2. 4.2 Views
      1. 4.2.1  Problems View
      2. 4.2.2  Generated Files View
      3. 4.2.3  Device View
        1. 4.2.3.1 Switching Device
      4. 4.2.4  History View
      5. 4.2.5  Preferences and Actions View
        1. 4.2.5.1 Device Pin Label
        2. 4.2.5.2 Show Groups as Tabs
        3. 4.2.5.3 Dark Mode
        4. 4.2.5.4 Lock Pinmux
        5. 4.2.5.5 Switch Target
      6. 4.2.6  Design Overview View
      7. 4.2.7  Pin View
      8. 4.2.8  Frequency View
      9. 4.2.9  Power View
      10. 4.2.10 Moving Views
    3. 4.3 Design Space
      1. 4.3.1 Blocks
      2. 4.3.2 Ports
      3. 4.3.3 Connections
    4. 4.4 Configurables
      1. 4.4.1 Text Configurable
      2. 4.4.2 Long Text Configurable
      3. 4.4.3 Dropdown Configurable
      4. 4.4.4 CheckBox Configurable
      5. 4.4.5 Table Configurable
      6. 4.4.6 Equation Configurable
      7. 4.4.7 Number Configurable
  8. 5Simulation
    1. 5.1 Setting Up a Simulation
      1. 5.1.1 Setting Simulation Parameters
      2. 5.1.2 Probing Ports
      3. 5.1.3 Setting Simulation Inputs
      4. 5.1.4 Setting Simulated Load
    2. 5.2 Simulation Window Controls
      1. 5.2.1 Markers
      2. 5.2.2 Zooming
      3. 5.2.3 Reset Axes
      4. 5.2.4 Compress and Expand Graphs
      5. 5.2.5 Pan
      6. 5.2.6 Export Image as PNG

5.1.4 Setting Simulated Load

Select an output pin. In the configurable section of the selected pin select the simulated load checkbox, as shown in Figure 5-2. Once a simulated load is enabled, a box appears below to configure the load on that pin, as shown in Figure 5-5.

Enabling a Simulated Load Figure 5-4 Enabling a Simulated Load
Configuring a Simulated Load Figure 5-5 Configuring a Simulated Load