SLLU371 November   2024

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
  5. 2Getting Started
    1. 2.1 Installation
    2. 2.2 Open Design
    3. 2.3 Configure Hardware
    4. 2.4 Simulate
      1. 2.4.1 Adjust Simulation Inputs
    5. 2.5 Getting Help
      1. 2.5.1 In Tool Help
      2. 2.5.2 Out of Tool Help
  6. 3Home Page
    1. 3.1 About
    2. 3.2 Open an Existing Design
    3. 3.3 Recent Designs
    4. 3.4 Quick Links
    5. 3.5 Update
    6. 3.6 Start a New Design
      1. 3.6.1 Reference Designs
  7. 4Workspace
    1. 4.1 Menus
      1. 4.1.1 File Button
      2. 4.1.2 About
      3. 4.1.3 Restart
      4. 4.1.4 Window Selection
      5. 4.1.5 Elements List
      6. 4.1.6 Static Buttons
      7. 4.1.7 Workspace Toolbar
    2. 4.2 Views
      1. 4.2.1  Problems View
      2. 4.2.2  Generated Files View
      3. 4.2.3  Device View
        1. 4.2.3.1 Switching Device
      4. 4.2.4  History View
      5. 4.2.5  Preferences and Actions View
        1. 4.2.5.1 Device Pin Label
        2. 4.2.5.2 Show Groups as Tabs
        3. 4.2.5.3 Dark Mode
        4. 4.2.5.4 Lock Pinmux
        5. 4.2.5.5 Switch Target
      6. 4.2.6  Design Overview View
      7. 4.2.7  Pin View
      8. 4.2.8  Frequency View
      9. 4.2.9  Power View
      10. 4.2.10 Moving Views
    3. 4.3 Design Space
      1. 4.3.1 Blocks
      2. 4.3.2 Ports
      3. 4.3.3 Connections
    4. 4.4 Configurables
      1. 4.4.1 Text Configurable
      2. 4.4.2 Long Text Configurable
      3. 4.4.3 Dropdown Configurable
      4. 4.4.4 CheckBox Configurable
      5. 4.4.5 Table Configurable
      6. 4.4.6 Equation Configurable
      7. 4.4.7 Number Configurable
  8. 5Simulation
    1. 5.1 Setting Up a Simulation
      1. 5.1.1 Setting Simulation Parameters
      2. 5.1.2 Probing Ports
      3. 5.1.3 Setting Simulation Inputs
      4. 5.1.4 Setting Simulated Load
    2. 5.2 Simulation Window Controls
      1. 5.2.1 Markers
      2. 5.2.2 Zooming
      3. 5.2.3 Reset Axes
      4. 5.2.4 Compress and Expand Graphs
      5. 5.2.5 Pan
      6. 5.2.6 Export Image as PNG

4.1.4 Window Selection

On the far left of the tool there are two icons. The top icon refers to the workspace view and the lower icon refers to the simulation view. While in the workspace, clicking on the second icon initiates the simulation. Once the simulation finishes running, the window shows the waveform results of the simulation. While in simulation view clicking on the top icon return to the workspace to continue creating the design.

Window Selection Location Figure 4-6 Window Selection Location