SLUSFN3B July 2024 – November 2026 BQ25820
PRODUCTION DATA
The battery current sense resistor between SRP and SRN is fixed at 5mΩ; using a different value is not recommended. The input current sense resistor between ACP and ACN is typically 2mΩ, but can be changed to 5mΩ. In USB-PD applications, a 5mΩ sense resistor is recommended to achieve programmability in 50mA/step whereas for power-path applications, a 2mΩ sense resistor is preferred. In addition, if input current limit function is not desired, ACP and ACN can be shorted together. For both of these sense resistors, a filter network is recommended as shown in the Typical Application.
For both the input current and the output current, the limits may be programmed using the I2C interface or an external programming resistor on ILIM_HIZ and ICHG pins, respectively.
The default input sense resistor (RAC_SNS) is 2mΩ, and the register allows for a range of up-to 50A input current limit.If a 5mΩ RAC_SNS is used, and the register is programmed to a value of 0x60, the true maximum current across the RAC_SNS will be: 50A * 2/5= 20A. With a 5mΩ RAC_SNS resistor, a 6A current limit would be achieved as: RILIM = KILIM * (2/5) / 6A = 3.3kΩ.