SLVSHD9A March 2025 – December 2025 DRV8001-Q1
PRODUCTION DATA
If at any time the input logic supply voltage on the DVDD pin falls below the VDVDD_POR threshold for longer than the tDVDD_POR_DG time or the nSLEEP pin is asserted low, the device enters the inactive state disabling the gate drivers, charge pump, OUTx outputs and protection monitors. Normal operation resumes when the DVDD undervoltage condition is removed or the nSLEEP pin is asserted high. After a DVDD power on reset (POR), the POR register bit is asserted until CLR_FLT is issued.