SLVUD42 July   2025

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Modification
    2. 2.2 Connector, Test Point, and Jumper Descriptions
      1. 2.2.1 Connector and Test Point Descriptions
      2. 2.2.2 Jumper Configuration
        1. 2.2.2.1 J10 (ENABLE)
        2. 2.2.2.2 J11 (I2C Target Address Selection)
    3. 2.3 Test Procedure
  9. 3Software
    1. 3.1 Software User Interface
      1. 3.1.1 Install USB2ANY Explorer
      2. 3.1.2 GUI Installation
      3. 3.1.3 Interface Hardware Setup
      4. 3.1.4 User Interface Operation
      5. 3.1.5 Register Map Screen
  10. 4Hardware Design Files
    1. 4.1 Schematic
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1. 5.1 Trademarks

4.2 PCB Layouts

TLV61290EVM-076 TLV61290EVM-076 Top-Side LayoutFigure 4-2 TLV61290EVM-076 Top-Side Layout
TLV61290EVM-076 TLV61290EVM-076 Inner Layer1Figure 4-3 TLV61290EVM-076 Inner Layer1
TLV61290EVM-076 TLV61290EVM-076 Inner Layer2Figure 4-4 TLV61290EVM-076 Inner Layer2
TLV61290EVM-076 TLV61290EVM-076 Bottom-Side LayoutFigure 4-5 TLV61290EVM-076 Bottom-Side Layout