SLVUDD5 July   2025 DAC39RF20

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents (Required Equipment)
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Setup Procedure
      1. 2.1.1  Installing the DAC39RF20EVM Configuration GUI Software
        1. 2.1.1.1 Installing and Setting Up Vivado™ Lab Tools
      2. 2.1.2  Connect the DAC39RF20EVM and TSW14J59EVM
      3. 2.1.3  Connect the Power Supplies to the Boards (Power Off)
      4. 2.1.4  Connect the Spectrum Analyzer to the EVM
      5. 2.1.5  Turn On the TSW14J59EVM Power and Connect to the PC
      6. 2.1.6  Turn On the DAC39RF20EVM Power Supplies and Connect to the PC
      7. 2.1.7  Turn On the Signal Generators
      8. 2.1.8  Launching the DAC39RF20EVM GUI and Programming the DAC EVM - JMODE 0 (Bypass Mode)
      9. 2.1.9  Launching the DAC39RF20EVM GUI and Programming the DAC EVM - JMODE 1 (DUC Mode)
      10. 2.1.10 Configuration Example of DAC39RF20EVM in DDS Mode
    2. 2.2 Evaluation Board Details: Analog Outputs
    3. 2.3 FMC Signal Routing
  7. 3Hardware Design Files
  8. 4Additional Information
    1. 4.1 Trademarks

2.1.1.1 Installing and Setting Up Vivado™ Lab Tools

For the DAC39RF20EVM, Vivado™ Lab Tools needs to be installed. Follow the steps outlined in this section.

  1. Create a user account for AMD and sign in.
    1. Fill out the appropriate information before downloading.
    2. When complete, click the download button.
  2. The download file type is a .tar file. In Windows, open the .tar file and explore.
  3. Next, find <xsetup.exe> in the Vivado_Lab_Win_2024.2_1113_1001 folder.
    1. Right-click and execute. Operating systems with Windows need consent to Extract All.
  4. Once the files are extracted, open the folder and find xsetup.exe.
    1. Right-click on this file and install. Operating systems with Windows need permissions.
  5. Follow the sequence of steps in the figures below to finish the Xilinx Lab Tools installation.
DAC39RF20EVM
DAC39RF20EVM Installing Vivado Lab Tools Figure 2-2 Installing Vivado Lab Tools
DAC39RF20EVM
DAC39RF20EVM
DAC39RF20EVM
DAC39RF20EVM
DAC39RF20EVM
DAC39RF20EVM
DAC39RF20EVM Adding Vivado Lab Tools to the Windows PATH Figure 2-3 Adding Vivado Lab Tools to the Windows PATH
DAC39RF20EVM
DAC39RF20EVM
DAC39RF20EVM
DAC39RF20EVM

Once this is complete, the J59_Server can run.