SLVUDL4 October   2025

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Power Requirements
    2. 2.2 Setup
    3. 2.3 Header Information
    4. 2.4 Jumper Information
    5. 2.5 LED Information
    6. 2.6 Test Points
    7. 2.7 Switches and Push Buttons
  9. 3Software
    1. 3.1 Software Description
  10. 4Application Specific Use Case
    1. 4.1 Application-Specific General Overview
    2. 4.2 TPD4S201 Short-to-Vbus Protection
    3. 4.3 TPS25751AEVM and BQ257xxEVM Setup
      1. 4.3.1 Hardware Setup with BQ25756(E)EVM
      2. 4.3.2 Setting up with BQ25792EVM or BQ25798EVM
      3. 4.3.3 Liquid Detection and Corrosion Mitigation Overview
        1. 4.3.3.1 Liquid Detection and Corrosion Mitigation Hardware Setup
  11. 5Hardware Design Files
    1. 5.1 Schematics
    2. 5.2 PCB Layouts
    3. 5.3 Bill of Materials (BOM)
  12. 6Additional Information
    1. 6.1 Trademarks

5.2 PCB Layouts

TPS25751AEVM TPS25751AEVM Top Layer CompositeFigure 5-2 TPS25751AEVM Top Layer Composite
TPS25751AEVM TPS25751AEVM Ground LayerFigure 5-4 TPS25751AEVM Ground Layer
TPS25751AEVM TPS25751AEVM Bottom Layer CompositeFigure 5-3 TPS25751AEVM Bottom Layer Composite
TPS25751AEVM TPS25751AEVM Power LayerFigure 5-5 TPS25751AEVM Power Layer
TPS25751AEVM TPS25751AEVM Board DimensionsFigure 5-6 TPS25751AEVM Board Dimensions