SNLU237B September   2018  – July 2025 DP83869HM

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
    5. 1.5 Quick Setup
      1. 1.5.1 Onboard Power Supply Operation
      2. 1.5.2 External Power Supply Operation
  6. 2Hardware
    1. 2.1 Board Setup Details
      1. 2.1.1 EVM High-Level Summary
    2. 2.2 Configuration Options
      1. 2.2.1 Bootstrap Options
        1. 2.2.1.1 Straps for PHY Address
        2. 2.2.1.2 Strap for DP83869 Functional Mode Selection
        3. 2.2.1.3 Straps for RGMII/SGMII to Copper
        4. 2.2.1.4 Straps for RGMII to 1000Base-X
        5. 2.2.1.5 Straps for RGMII to 100Base-FX
        6. 2.2.1.6 Straps for Bridge Mode (SGMII-RGMII)
        7. 2.2.1.7 Straps for 100 M Media Converter
        8. 2.2.1.8 Straps for 1000 M Media Convertor
      2. 2.2.2 SGMII/Fiber Interface
      3. 2.2.3 RGMII
      4. 2.2.4 Clock Output
      5. 2.2.5 Clock Input
      6. 2.2.6 Switch Configuration Options
  7. 3Software
    1. 3.1 MSP430 Driver
    2. 3.2 USB-2-MDIO Software
  8. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 Layout
    3. 4.3 Bill of Materials
  9. 5Additional Information
    1. 5.1 Definitions
    2.     Trademarks
  10. 6Revision History

2.2.2 SGMII/Fiber Interface

SGMII Pins from the DUT are multipurpose pins functioning as SGMII and Fiber IO pins. By default, the EVM is configured for Fiber operation.

Note: Fiber Transceiver is not a part of the EVM package. SFP cage and SFP connector need to be mounted.

For routing signals to Fiber Transceiver, populate R31, R38, R45, and R47. Remove C12, C14, C15, and C17.

For routing signals to SGMII SMAs, populate C12, C14, C15, and C17. Remove R31, R38, R45, and R47.