Produktdetails

CPU External MCU, External MPU Type MCU or MPU attach, Module Technology Wi-Fi Protocols Matter, Wi-Fi 2.4 GHz Operating system Android, FreeRTOS, Linux, Zephyr RTOS Certifications CE, FCC, ISED, MIC, Wi-Fi CERTIFIED Chip Throughput UDP (max) (Mbps) 65 Features 802.11ax, AP, COEX, STA Edge AI enabled No Security Secure communication, Secure firmware & software update Rating Catalog Operating temperature range (°C) -40 to 85
CPU External MCU, External MPU Type MCU or MPU attach, Module Technology Wi-Fi Protocols Matter, Wi-Fi 2.4 GHz Operating system Android, FreeRTOS, Linux, Zephyr RTOS Certifications CE, FCC, ISED, MIC, Wi-Fi CERTIFIED Chip Throughput UDP (max) (Mbps) 65 Features 802.11ax, AP, COEX, STA Edge AI enabled No Security Secure communication, Secure firmware & software update Rating Catalog Operating temperature range (°C) -40 to 85
QFM (MOZ) 65 121 mm² (11 mm × 11 mm)

Key Features

  • Wi-Fi 6 (802.11ax)
  • Bluetooth Low Energy 5.4 in CC33x1MOD
  • Companion module to any processor or MCU host capable of running a TCP/IP stack
  • Integrated 2.4GHz PA for a complete wireless system with up to +18.4dBm output power
  • Operating temperature: –40°C to +85°C
  • Application throughput up to 50Mbps
  • Regulatory Certification
    • FCC: Z64-CC33SBMOD
    • IC/ISED: 451I-CC33SBMOD
    • ETSI/CE
    • MIC (TELEC): 201-250389 (Test Grade: 01), 201-250390 (Test Grade: 00)
  • Based on CC3301 QuickTrack Qualified chipset
  • Bluetooth Controller Subsystem Qualified
Extended Features

  • Wi-Fi 6
    • 2.4GHz, 20MHz, single spatial stream
    • MAC, baseband, and RF transceiver with support for IEEE 802.11 b/g/n/ax
    • Target wake time (TWT), OFDMA, MU-MIMO (downlink), Basic Service Set Coloring, and trigger-based transmission for improved efficiency
    • Hardware-based encryption and decryption supporting WPA2 and WPA3
    • Excellent interoperability
    • Support for 4-bit SDIO or SPI host interfaces
  • Bluetooth Low Energy 5.4
    • LE Coded PHYs (long range), LE 2M PHY (high speed), and Advertising Extension
    • Host controller interface (HCI) transport with an option for UART or shared SDIO
    • Internal coexistence mechanism with Wi-Fi to share the same RF chains and antenna
  • Enhanced Security
    • Secured host interface
    • Firmware authentication
    • Anti-rollback protection
  • Multirole support (for example, concurrent STA and AP) to connect with Wi-Fi devices on different RF channels (Wi-Fi networks)
  • Optional antenna diversity or selection
  • 3-wire or 1-wire PTA for external coexistence with additional 2.4GHz radios (for example, Thread or Zigbee)
  • Clock sources

    • 40MHz XTAL fast clock (Integrated into the module)
    • Internal slow clock or external 32.768kHz slow clock
  • Small package size
    • Easy to design with 65-pin, 11mm × 11mm LGA package, 0.65mm pitch

Key Features

  • Wi-Fi 6 (802.11ax)
  • Bluetooth Low Energy 5.4 in CC33x1MOD
  • Companion module to any processor or MCU host capable of running a TCP/IP stack
  • Integrated 2.4GHz PA for a complete wireless system with up to +18.4dBm output power
  • Operating temperature: –40°C to +85°C
  • Application throughput up to 50Mbps
  • Regulatory Certification
    • FCC: Z64-CC33SBMOD
    • IC/ISED: 451I-CC33SBMOD
    • ETSI/CE
    • MIC (TELEC): 201-250389 (Test Grade: 01), 201-250390 (Test Grade: 00)
  • Based on CC3301 QuickTrack Qualified chipset
  • Bluetooth Controller Subsystem Qualified
Extended Features

  • Wi-Fi 6
    • 2.4GHz, 20MHz, single spatial stream
    • MAC, baseband, and RF transceiver with support for IEEE 802.11 b/g/n/ax
    • Target wake time (TWT), OFDMA, MU-MIMO (downlink), Basic Service Set Coloring, and trigger-based transmission for improved efficiency
    • Hardware-based encryption and decryption supporting WPA2 and WPA3
    • Excellent interoperability
    • Support for 4-bit SDIO or SPI host interfaces
  • Bluetooth Low Energy 5.4
    • LE Coded PHYs (long range), LE 2M PHY (high speed), and Advertising Extension
    • Host controller interface (HCI) transport with an option for UART or shared SDIO
    • Internal coexistence mechanism with Wi-Fi to share the same RF chains and antenna
  • Enhanced Security
    • Secured host interface
    • Firmware authentication
    • Anti-rollback protection
  • Multirole support (for example, concurrent STA and AP) to connect with Wi-Fi devices on different RF channels (Wi-Fi networks)
  • Optional antenna diversity or selection
  • 3-wire or 1-wire PTA for external coexistence with additional 2.4GHz radios (for example, Thread or Zigbee)
  • Clock sources

    • 40MHz XTAL fast clock (Integrated into the module)
    • Internal slow clock or external 32.768kHz slow clock
  • Small package size
    • Easy to design with 65-pin, 11mm × 11mm LGA package, 0.65mm pitch

The SimpleLink™ Wi-Fi CC33xx family of devices is where affordability meets reliability, enabling engineers to connect more applications with confidence. CC330xMOD devices are certified modules designed to simplify hardware design and reduce time-to-market.

  • CC3300MOD: A 2.4GHz Wi-Fi 6 companion module
  • CC3301MOD: A 2.4GHz Wi-Fi 6 and Bluetooth Low Energy 5.4 companion module

The CC330xMOD offers the latest standards from Wi-Fi and BLE while maintaining compatibility with Wi-Fi 4 (802.11 b/g/n). These CC330xMOD devices are based on the 10th-generation connectivity combo chip from Texas Instruments. As such, the CC330xMOD is based on proven technology. These modules are an excellent choice to use in cost-sensitive embedded applications with a Linux or RTOS host running TCP/IP. CC330xMOD brings the efficiency of Wi-Fi 6 to embedded device applications for the Internet of Things (IoT).

The SimpleLink™ Wi-Fi CC33xx family of devices is where affordability meets reliability, enabling engineers to connect more applications with confidence. CC330xMOD devices are certified modules designed to simplify hardware design and reduce time-to-market.

  • CC3300MOD: A 2.4GHz Wi-Fi 6 companion module
  • CC3301MOD: A 2.4GHz Wi-Fi 6 and Bluetooth Low Energy 5.4 companion module

The CC330xMOD offers the latest standards from Wi-Fi and BLE while maintaining compatibility with Wi-Fi 4 (802.11 b/g/n). These CC330xMOD devices are based on the 10th-generation connectivity combo chip from Texas Instruments. As such, the CC330xMOD is based on proven technology. These modules are an excellent choice to use in cost-sensitive embedded applications with a Linux or RTOS host running TCP/IP. CC330xMOD brings the efficiency of Wi-Fi 6 to embedded device applications for the Internet of Things (IoT).

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 4
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt CC330xMOD SimpleLink™ Wi-Fi 6 and Bluetooth® Low Energy Companion Module datasheet (Rev. A) PDF | HTML 12.08.2025
Benutzerhandbuch CC33xx Hardware Integration User's Guide (Rev. B) PDF | HTML 17.06.2026
Zertifikat Module Certification Request Form (Change in ID / Change in Multiple Listing) (Rev. A) 29.05.2026
Benutzerhandbuch CC33xx WLAN Features User's Guide (Rev. B) PDF | HTML 15.04.2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

BP-CC3301MOD — Plug-In-Modul für SimpleLink™ CC3301MOD Wi-Fi 6 und energieeffizientes Bluetooth® BoosterPack™

Die SimpleLink™ CC3301MOD Wi-Fi 6 und Bluetooth® Low Energy-Bausteine ermöglichen erschwingliche, zuverlässige und sichere Konnektivität in Embedded-Anwendungen mit einem Prozessor-Host unter Linux® oder einem MCU-Host unter RTOS. Das CC3301MOD BoosterPack™-Steckmodul (BP-CC3301MOD) ist ein Test- (...)

Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
IDE, Konfiguration, Compiler oder Debugger

CCSTUDIO — Code Composer Studio integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

Unterstützte Produkte und Hardware
Anwendungssoftware und Frameworks

SIMPLELINK-WIFI-TOOLBOX — SimpleLink Wi-Fi Toolbox collection of tools to help development and testing of the CC33xx and CC35xxE Devices

Das WLAN-Toolbox-Paket bietet alle Funktionen, die zum Debuggen und Überwachen von WLAN-/Bluetooth®-Low-Energy-Firmware mit einem Host, zum Durchführen von HF-Validierungstests, zum Durchführen von Vorabtests für regulatorische Zertifizierungsprüfungen und zum Debuggen von Problemen bei der (...)

Unterstützte Produkte und Hardware
Treiber oder Bibliothek

CC33XX-LINUX-MPU — CC33xx device driver source for MPUs running Linux OS.

Die CC33XX-Bausteine sind Ein- und Dualband-Begleitbausteine für Wi-Fi 6 und Bluetooth Low Energy 5.4, die sowohl für Linux- als auch RTOS-basierte Systeme geeignet sind. CC33XX-SOFTWARE ist eine Sammlung von Quellen für die Softwareentwicklung, die die schnelle Einrichtung und den sofortigen (...)

Unterstützte Produkte und Hardware
Treiber oder Bibliothek

CC33XX-LINUX-MPU-PORTS-SW — CC33XX-LINUX-MPU Ports to LTS kernels and other HW platforms

Die CC33XX-Bausteine sind Ein- und Dualband-Begleitbausteine für Wi-Fi 6 und Bluetooth Low Energy 5.4, die sowohl für Linux- als auch RTOS-basierte Systeme geeignet sind. CC33XX-SOFTWARE ist eine Sammlung von Quellen für die Softwareentwicklung, die die schnelle Einrichtung und den sofortigen (...)

Unterstützte Produkte und Hardware
Treiber oder Bibliothek

CC33XX-RTOS-MCU — CC33xx device driver for MCU and RTOS platforms

Die CC33XX-Bausteine sind Ein- und Dualband-Begleitbausteine für Wi-Fi 6 und Bluetooth Low Energy 5.4, die sowohl für Linux- als auch RTOS-basierte Systeme geeignet sind. CC33XX-SOFTWARE ist eine Sammlung von Quellen für die Softwareentwicklung, die die schnelle Einrichtung und den sofortigen (...)

Unterstützte Produkte und Hardware
Support-Software

CC33XX-QUICKTRACK-CONTROL-TOOL — Die CC33XX QuickTrack Control App ist ein Testtool für die WLAN-Automatisierung, das für die Wi-Fi®-Zertifizierung verwendet wird

Die CC33XX-Bausteine sind Ein- und Dualband-Begleitbausteine für Wi-Fi 6 und Bluetooth Low Energy 5.4, die sowohl für Linux- als auch RTOS-basierte Systeme geeignet sind. CC33XX-SOFTWARE ist eine Sammlung von Quellen für die Softwareentwicklung, die die schnelle Einrichtung und den sofortigen (...)

Unterstützte Produkte und Hardware
Zertifizierung

SIMPLELINK-CC33XX-REPORTS — Reports: CC33xx Regulatory Certification

Suchen Sie nach Unterstützung bei der Zertifizierung für CC3XXX-Module? SIMPLELINK-CC3XXX-CERTIFICATION bietet die relevanten Informationen und Unterstützung für eine erfolgreiche Zertifizierung von CC31XX-, CC32XX- und CC33XX-Produkten. Auf dieser Seite finden Sie die neuesten (...)

Unterstützte Produkte und Hardware
Designtool

CC33XX-DESIGN-TOOLS — Design resources for CC33xx and CC33xxMOD Devices

Design resources for CC33xx devices including design files and design checklists
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
QFM (MOZ) 65 Ultra Librarian

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos