Home Verstärker Operationsverstärker (OpAmps) Universal-Operationsverstärker
Home
Verstärker
Operationsverstärker (OpAmps)
Universal-Operationsverstärker

LF444QML

AKTIV

Energieeffizienter Vierfach-Operationsverstärker, 30 V, 1 MHz, militärtauglich

Jetzt bestellen
Datenblatt

LF444QML

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 18 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 6 Rail-to-rail No GBW (typ) (MHz) 1 Slew rate (typ) (V/µs) 1 Vos (offset voltage at 25°C) (max) (mV) 10 Iq per channel (typ) (mA) 0.15 Vn at 1 kHz (typ) (nV√Hz) 35 Rating Military Operating temperature range (°C) -55 to 125 Offset drift (typ) (µV/°C) 10 Input bias current (max) (pA) 100 CMRR (typ) (dB) 100 Iout (typ) (A) 0.02 Architecture FET Input common mode headroom (to negative supply) (typ) (V) 3 Input common mode headroom (to positive supply) (typ) (V) -1 Output swing headroom (to negative supply) (typ) (V) 2 Output swing headroom (to positive supply) (typ) (V) -2
Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 18 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 6 Rail-to-rail No GBW (typ) (MHz) 1 Slew rate (typ) (V/µs) 1 Vos (offset voltage at 25°C) (max) (mV) 10 Iq per channel (typ) (mA) 0.15 Vn at 1 kHz (typ) (nV√Hz) 35 Rating Military Operating temperature range (°C) -55 to 125 Offset drift (typ) (µV/°C) 10 Input bias current (max) (pA) 100 CMRR (typ) (dB) 100 Iout (typ) (A) 0.02 Architecture FET Input common mode headroom (to negative supply) (typ) (V) 3 Input common mode headroom (to positive supply) (typ) (V) -1 Output swing headroom (to negative supply) (typ) (V) 2 Output swing headroom (to positive supply) (typ) (V) -2
CDIP_SB (NAK) 14 117.3753 mm² (— mm × — mm)

  • ¼ supply current of a LM148:  250 μA/Amplifier (max)
  • Low input bias current: 100 pA (max)
  • High gain bandwidth: 1 MHz
  • High slew rate: 1 V/μs
  • Low noise voltage for low power 
  • Low input noise current 
  • High input impedance: 10 12Ω
  • High gain, VO = ±10V, RL = 10KΩ: 25K (min)

  • ¼ supply current of a LM148:  250 μA/Amplifier (max)
  • Low input bias current: 100 pA (max)
  • High gain bandwidth: 1 MHz
  • High slew rate: 1 V/μs
  • Low noise voltage for low power 
  • Low input noise current 
  • High input impedance: 10 12Ω
  • High gain, VO = ±10V, RL = 10KΩ: 25K (min)

    • The LF444 quad low power operational amplifier provides many of the same AC characteristics as the industry standard LM148 while greatly improving the DC characteristics of the LM148. The amplifier has the same bandwidth, slew rate, and gain (10 kΩ load) as the LM148 and only draws one fourth the supply current of the LM148. In addition the well matched high voltage JFET input devices of the LF444 reduce the input bias and offset currents by a factor of 10,000 over the LM148. The LF444 also has a very low equivalent input noise voltage for a low power amplifier.

    The LF444 is pin compatible with the LM148 allowing an immediate 4 times reduction in power drain in many applications. The LF444 should be used wherever low power dissipation and good electrical characteristics are the major considerations.

    The LF444 quad low power operational amplifier provides many of the same AC characteristics as the industry standard LM148 while greatly improving the DC characteristics of the LM148. The amplifier has the same bandwidth, slew rate, and gain (10 kΩ load) as the LM148 and only draws one fourth the supply current of the LM148. In addition the well matched high voltage JFET input devices of the LF444 reduce the input bias and offset currents by a factor of 10,000 over the LM148. The LF444 also has a very low equivalent input noise voltage for a low power amplifier.

    The LF444 is pin compatible with the LM148 allowing an immediate 4 times reduction in power drain in many applications. The LF444 should be used wherever low power dissipation and good electrical characteristics are the major considerations.

    filter Andere Universal-Operationsverstärker suchen
    Herunterladen Video mit Transkript ansehen Video

    Technische Dokumentation

    Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
    Alle anzeigen 2
    Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
    * Datenblatt LF444QML Quad Low Power JFET Input Operational Amplifier datasheet 16.12.2010
    E-book The Signal e-book: A compendium of blog posts on op amp design topics PDF | HTML 28.03.2017

    Design und Entwicklung

    Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

    Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
    CDIP_SB (NAK) 14 Ultra Librarian
    Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

    Bestellen & Qualität

    Support und Schulungen

    TI E2E™-Foren mit technischem Support von TI-Ingenieuren

    Alle Forenthemen auf Englisch anzeigen

    Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

    Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

    Videos