Startseite Energiemanagement AC/DC & DC/DC converters (integrated FET)
Startseite
Energiemanagement
AC/DC & DC/DC converters (integrated FET)

LM26420

AKTIV

Zweifacher synchroner DC/DC-Wandler, 2 A, hoher Wirkungsgrad

Jetzt bestellen
Datenblatt

Eine neuere Version dieses Produkts ist verfügbar

open-in-new Alternativen vergleichen
Gleiche Funktionalität, andere Pinbelegung als verglichener Baustein
NEU TPS62442 AKTIV 2,75-V-zu-6-V-Zweifach-Abwärtswandler mit 2 A oder 3 A im QFN-Gehäuse Next generation dual buck with smaller size wand broader VIN range.

LM26420

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Iout (max) (A) 2 Vin (min) (V) 3 Vin (max) (V) 5.5 Topology Buck Type Converter Switching frequency (min) (kHz) 550 Switching frequency (max) (kHz) 2200 Features Enable, Light Load Efficiency, Light load efficiency, Phase Interleaving, Power good, Pre-Bias Start-Up, Synchronous Rectification Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 4.5 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0009
Iout (max) (A) 2 Vin (min) (V) 3 Vin (max) (V) 5.5 Topology Buck Type Converter Switching frequency (min) (kHz) 550 Switching frequency (max) (kHz) 2200 Features Enable, Light Load Efficiency, Light load efficiency, Phase Interleaving, Power good, Pre-Bias Start-Up, Synchronous Rectification Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 4.5 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0009
HTSSOP (PWP) 20 41.6 mm² 6.5 x 6.4 WQFN (RUM) 16 16 mm² 4 x 4
  • Compliant with CISPR25 Class 5 Conducted Emissions
  • Input Voltage Range of 3 V to 5.5 V
  • Output Voltage Range of 0.8 V to 4.5 V
  • 2-A Output Current per Regulator
  • High Switching Frequency: 2.2 MHz (LM26420X)
        0.55 MHz (LM26420Y)
  • 0.8 V, 1.5% Internal Voltage Reference
  • Internal Soft Start
  • Independent Power Good and Precision Enable for Each Output
  • Current Mode, PWM Operation
  • Thermal Shutdown
  • Overvoltage Protection
  • Start-up into Prebiased Output Loads
  • Regulators are 180° Out of Phase
  • Create a Custom Design Using the LM26420 With the WEBENCH® Power Designer
  • Compliant with CISPR25 Class 5 Conducted Emissions
  • Input Voltage Range of 3 V to 5.5 V
  • Output Voltage Range of 0.8 V to 4.5 V
  • 2-A Output Current per Regulator
  • High Switching Frequency: 2.2 MHz (LM26420X)
        0.55 MHz (LM26420Y)
  • 0.8 V, 1.5% Internal Voltage Reference
  • Internal Soft Start
  • Independent Power Good and Precision Enable for Each Output
  • Current Mode, PWM Operation
  • Thermal Shutdown
  • Overvoltage Protection
  • Start-up into Prebiased Output Loads
  • Regulators are 180° Out of Phase
  • Create a Custom Design Using the LM26420 With the WEBENCH® Power Designer

The LM26420 regulator is a monolithic, high-efficiency dual PWM step-down DC/DC converter. This device has the ability to drive two 2-A loads with an internal 75-mΩ PMOS top switch and an internal 50-mΩ NMOS bottom switch using state-of-the-art BICMOS technology results in the best power density available. The world-class control circuitry allow on times as low as 30 ns, thus supporting exceptionally high-frequency conversion over the entire 3-V to 5.5-V input operating range down to the minimum output voltage of 0.8 V.

Although the operating frequency is high, efficiencies up to 93% are easy to achieve. External shutdown is included, featuring an ultra-low standby current. The LM26420 utilizes current-mode control and internal compensation to provide high performance regulation over a wide range of operating conditions.

The LM26420 regulator is a monolithic, high-efficiency dual PWM step-down DC/DC converter. This device has the ability to drive two 2-A loads with an internal 75-mΩ PMOS top switch and an internal 50-mΩ NMOS bottom switch using state-of-the-art BICMOS technology results in the best power density available. The world-class control circuitry allow on times as low as 30 ns, thus supporting exceptionally high-frequency conversion over the entire 3-V to 5.5-V input operating range down to the minimum output voltage of 0.8 V.

Although the operating frequency is high, efficiencies up to 93% are easy to achieve. External shutdown is included, featuring an ultra-low standby current. The LM26420 utilizes current-mode control and internal compensation to provide high performance regulation over a wide range of operating conditions.

open-in-new Andere AC/DC & DC/DC converters (integrated FET) suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 9
Typ Titel Datum
* Data sheet LM26420 Dual 2-A, High-Efficiency Synchronous DC/DC Converter datasheet (Rev. L) PDF | HTML 13 Apr 2018
Selection guide Buck Converter Quick Reference Guide (Rev. B) 08 Apr 2021
Technical article Design an automotive cluster power supply PDF | HTML 16 Okt 2015
Technical article How to overcome automotive front-end design challenges PDF | HTML 10 Sep 2015
Technical article How to design a quiet and compact industrial power supply PDF | HTML 21 Jul 2015
Technical article Spread Spectrum: Headache tablet or vitamin pill? PDF | HTML 18 Mai 2015
White paper Power Management IC (PMIC) Guide for Automotive (Rev. A) 29 Okt 2014
EVM User's guide AN-1870 LM26420 Evaluation Board (Rev. B) 24 Apr 2013
Application note AN-1973 Benefits and Challenges of High-Frequency Regulators (Rev. A) 23 Apr 2013

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LM26420XMHEVAL — Evaluierungsplatine für synchrone eTSSOP-Abwärtswandler, LM26420 2,2 MHz

The LM26420 Evaluation board was designed to provide two 2A outputs, VOUT1 and VOUT2 . It is available in either the eTSSOP package option of the LM26420 for easier probing or the LLP version for evaluating the smaller package. The design emphasizes on the compactness of the LM26420 PCB layout and (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Evaluierungsplatine

LM26420XSQEVAL — LM26420 2,2 MHz, LLP-Synchron-Abwärtswandler – Evaluierungsplatine

The LM26420 Evaluation board was designed to provide two 2A outputs, VOUT1 and VOUT2 . It is available in either the eTSSOP package option of the LM26420 for easier probing or the LLP version for evaluating the smaller package. The design emphasizes on the compactness of the LM26420 PCB layout and (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Simulationsmodell

LM26420X PSpice Transient Model

SNVMA16.ZIP (132 KB) - PSpice Model
Herunterladen
Simulationsmodell

LM26420X Unencrypted PSpice Transient Model

SNVMA15.ZIP (5 KB) - PSpice Model
Herunterladen
Simulationsmodell

LM26420Y PSpice Transient Model

SNVMA14.ZIP (140 KB) - PSpice Model
Herunterladen
Simulationsmodell

LM26420Y Unencrypted PSpice Transient Model

SNVMA13.ZIP (5 KB) - PSpice Model
Herunterladen
Referenzdesigns

PMP9458 — Referenzdesign für14-W-Stromversorgung mit mehreren Ausgängen gemäß CISPR 25 Klasse 5 für Kombiinstr

The PMP9458 reference design is a conducted EMI optimized 2-layer board power supply for automotive cluster units. The power supply has two buck regulators in cascaded connection: the first stage buck generates a 5V, 2A output using the LM26003, and the second stage generates two outputs of 2.8V, (...)
Test report: PDF
Schaltplan: PDF
Referenzdesigns

TIDM-HAHSCPTO — Hochverfügbarer Hochgeschwindigkeitszähler (HSC) und Impulswellenausgang (PTO) 0 Referenzdesign

This reference design provides firmware and test platform for two different industrial input/output functions related to motion control: high-speed counter (HSC) and pulse-train output (PTO). The design is based on a microcontroller platform that is suitable for use in industrial applications (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

TIDA-01322 — Low-Dropout- (LDO), Hochstrom- und No-Bias-Rail-Referenzdesign für industrielle Anwendungen

This reference design demonstrates a low-noise, low-dropout (LDO), high-current power stage with no voltage-bias-rail requirement utilizing the LP5922 LDO linear regulator. The power stage demonstrated is ideal for industrial applications. Within industrial applications, low-noise power is (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

PMP9477 — Stromversorgung mit mehreren Ausgängen nach CISPR 25 Klasse 5 mit Vorverstärker für Fahrzeug-Kombiin

The PMP9477 design is a conducted EMI optimized multi-output power supply for automotive cluster units.  The power supply has a pre-boost stage for cold crank and start-stop operation and two buck regulators.  The pre-boost stage features the LM3481 boost controller and will start to (...)
Test report: PDF
Schaltplan: PDF
Referenzdesigns

PMP9492 — CISPR 25 Klasse 5-Stromversorgungs-Referenzdesign für Rückfahrkamera mit mehreren Ausgängen, ADAS-Sy

PMP9492 is a conducted EMI optimized (CISPR 25 Class 5) 9 W Multi output Design for  Wide Range Vin automotive ADAS application that supports Cold –Cranking Conditions . The design uses an LM53603 regulator IC (used as Buck), LM26420 (used as dual Buck) and TPS60150 regulator IC (used as (...)
Test report: PDF
Schaltplan: PDF
Referenzdesigns

PMP9462 — Referenzdesign für rauscharmen Abwärtswandler mit Dreifach-Ausgang und breitem VIN-Bereich

The reference design PMP9462 is a single input step-down converter with three low-noise outputs. The module uses LM43603, a synchronous step-down DC-DC converter capable of driving up to 3A of load current from an input voltage ranging 7V to 36V. The 5V output from LM43603 enables the LM26420 which (...)
Test report: PDF
Schaltplan: PDF
Gehäuse Pins Herunterladen
HTSSOP (PWP) 20 Optionen anzeigen
WQFN (RUM) 16 Optionen anzeigen
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos