Gehäuseinformationen
| Gehäuse | Pins SOIC (D) | 8 |
| Betriebstemperaturbereich (°C) 0 to 70 |
| Gehäusemenge | Träger 95 | TUBE |
Merkmale von LM392-N
- Wide Power Supply Voltage
Range
- Single Supply: 3V to 32V
- Dual Supply: ±1.5V to ±16V
- Low Supply Current Drain—Essentially Independent of Supply Voltage: 600 μA
- Low Input Biasing Current: 50 nA
- Low Input Offset Voltage: 2 mV
- Low Input Offset Current: 5 nA
- Input Common-Mode Voltage Range Includes Ground
- Differential Input Voltage Range Equal to the Power Supply Voltage
- ADDITIONAL OP AMP FEATURES
- Internally Frequency Compensated for Unity Gain
- Large DC Voltage Gain: 100 dB
- Wide Bandwidth (Unity Gain): 1 MHz
- Large Output Voltage Swing: 0V to V+ − 1.5V
- ADDITIONAL COMPARATOR
FEATURES
- Low Output Saturation Voltage: 250 mV at 4 mA
- Output Voltage Compatible with all Types of Logic Systems
Advantages
- Eliminates Need for Dual Power Supplies
- An Internally Compensated Op Amp and a Precision Comparator in the Same Package
- Allows Sensing at or Near Ground
- Power Drain Suitable for Battery Operation
- Pin-Out is the Same as Both the LM358 Dual Op Amp and the LM393 Dual Comparator
All trademarks are the property of their respective owners.
Beschreibung von LM392-N
The lm392-N series consists of 2 independent building block circuits. One is a high gain, internally frequency compensated operational amplifier, and the other is a precision voltage comparator. Both the operational amplifier and the voltage comparator have been specifically designed to operate from a single power supply over a wide range of voltages. Both circuits have input stages which will common-mode input down to ground when operating from a single power supply. Operation from split power supplies is also possible and the low power supply current is independent of the magnitude of the supply voltage.
Application areas include transducer amplifier with pulse shaper, DC gain block with level detector, VCO, as well as all conventional operational amplifier or voltage comparator circuits. Both circuits can be operated directly from the standard 5 VDC power supply voltage used in digital systems, and the output of the comparator will interface directly with either TTL or CMOS logic. In addition, the low power drain makes the lm392-N extremely useful in the design of portable equipment.