LMC6482

AKTIV

Dual-Operationsverstärker mit extrem niedrigem Bias-Strom und CMOS-Rail-to-Rail-Eingang und -Ausgang

Jetzt bestellen

Datenblatt

document-pdfAcrobat LMC648x CMOS Rail-to-Rail Input and Output Operational Amplifiers datasheet (Rev. J) (Englisch) PDF | HTML

Eine neuere Version dieses Produkts ist verfügbar

open-in-new

Alternativen vergleichen

Drop-In-Ersatz mit gegenüber dem verglichenen Baustein verbesserter Funktionalität.

TLV9152

AKTIV

Energieeffizienter Zweifach-Operationsverstärker, 16 V, 4,5 MHz 16-V general purpose amplifier with higher bandwidth (4.5 MHz), faster slew rate (21 V/µs) and lower noise (10.8 nV/√Hz)

LMC6482

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

15.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

3

Vos (offset voltage at 25°C) (max) (mV)

0.75

Offset drift (typ) (µV/°C)

1

GBW (typ) (MHz)

1.5

Slew rate (typ) (V/µs)

1.3

Rail-to-rail

In, Out

Iq per channel (typ) (mA)

0.5

Vn at 1 kHz (typ) (nV√Hz)

37

CMRR (typ) (dB)

82

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Iout (typ) (A)

0.015

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.3

Input common mode headroom (to positive supply) (typ) (V)

0.3

Output swing headroom (to negative supply) (typ) (V)

0.3

Output swing headroom (to positive supply) (typ) (V)

-0.3

THD + N at 1 kHz (typ) (%)

0.01

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

15.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

3

Vos (offset voltage at 25°C) (max) (mV)

0.75

Offset drift (typ) (µV/°C)

1

GBW (typ) (MHz)

1.5

Slew rate (typ) (V/µs)

1.3

Rail-to-rail

In, Out

Iq per channel (typ) (mA)

0.5

Vn at 1 kHz (typ) (nV√Hz)

37

CMRR (typ) (dB)

82

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Iout (typ) (A)

0.015

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.3

Input common mode headroom (to positive supply) (typ) (V)

0.3

Output swing headroom (to negative supply) (typ) (V)

0.3

Output swing headroom (to positive supply) (typ) (V)

-0.3

THD + N at 1 kHz (typ) (%)

0.01

SOIC (D)

8

29.4 mm² (4.9 mm × 6 mm)

VSSOP (DGK)

8

14.7 mm² (3 mm × 4.9 mm)

PDIP (P)

8

92.5083 mm² (9.81 mm × 9.43 mm)

Rail-to-rail input common-mode voltage range (specified over temperature)
Rail-to-rail output swing (within 20mV of supply rail, 100kΩ load)
Specified 3V, 5V, and 15V performance
Excellent CMRR and PSRR: 82dB
Ultra-low input current: 20fA
Specified for 2kΩ and 600Ω loads
Improved replacement for TLC272, TLC277

Rail-to-rail input common-mode voltage range (specified over temperature)
Rail-to-rail output swing (within 20mV of supply rail, 100kΩ load)
Specified 3V, 5V, and 15V performance
Excellent CMRR and PSRR: 82dB
Ultra-low input current: 20fA
Specified for 2kΩ and 600Ω loads
Improved replacement for TLC272, TLC277

The LMC6482 and LMC6484 (LMC648x) devices provide a common-mode range that extends to both supply rails. This rail-to-rail performance combined with excellent accuracy, due to a high CMRR, makes these devices unique among rail-to-rail input amplifiers. The devices are an excellent choice for systems that require a large input signal range, such as data acquisition. The LMC648x are also an excellent upgrade for circuits using limited common-mode range amplifiers, such as the TLC272, TLC274, TLC277 and TLC279.

Maximum dynamic signal range is provided in low voltage and single supply systems by the rail-to-rail output swing of the LMC648x. The rail-to-rail output swing is maintained for loads down to 600Ω of the device. Specified low-voltage characteristics and low-power dissipation make the LMC648x a great choice for battery-operated systems.

The LMC648x devices are available in PDIP, SOIC, and VSSOP packages.

The LMC6482 and LMC6484 (LMC648x) devices provide a common-mode range that extends to both supply rails. This rail-to-rail performance combined with excellent accuracy, due to a high CMRR, makes these devices unique among rail-to-rail input amplifiers. The devices are an excellent choice for systems that require a large input signal range, such as data acquisition. The LMC648x are also an excellent upgrade for circuits using limited common-mode range amplifiers, such as the TLC272, TLC274, TLC277 and TLC279.

Maximum dynamic signal range is provided in low voltage and single supply systems by the rail-to-rail output swing of the LMC648x. The rail-to-rail output swing is maintained for loads down to 600Ω of the device. Specified low-voltage characteristics and low-power dissipation make the LMC648x a great choice for battery-operated systems.

The LMC648x devices are available in PDIP, SOIC, and VSSOP packages.

filter

Andere Präzisionsoperationsverstärker (Vos < 1 mV) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 6

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Datenblatt	LMC648x CMOS Rail-to-Rail Input and Output Operational Amplifiers datasheet (Rev. J)	PDF \| HTML	30.09.2024
	E-book	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	28.03.2017
	Anwendungshinweis	AN-1237 RSDS™ Flat Panel Display Design Guidelines Part 2 (Rev. A)		06.05.2013
	Anwendungshinweis	AN-1234 RSDS™ Flat Panel Display Design Guidelines Part 1 (Rev. A)		06.05.2013
	Anwendungshinweis	AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)		26.04.2013
	Anwendungshinweis	Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)		22.04.2013

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

AMP-PDK-EVM — Evaluierungsmodul für das Verstärker-Leistungs-Entwicklungskit

Das Verstärker-Leistungs-Entwicklungskit (PDK) ist ein Evaluierungsmodul (EVM) zum Testen gängiger Operationsverstärker (OpAmp)-Parameter und ist mit den meisten Operationsverstärkern und Komparatoren kompatibel. Das EVM-Kit bietet eine Hauptplatine mit verschiedenen gesockelten (...)

Benutzerhandbuch: PDF | HTML