Home Energiemanagement DC/DC-Schaltregler DC/DC-Wandler
Home
Energiemanagement
DC/DC-Schaltregler
DC/DC-Wandler
NEU

LMR70410-Q1

VORSCHAU
Jetzt bestellen
Datenblatt

LMR70410-Q1

VORSCHAU
Datenblatt Jetzt bestellen

Produktdetails

Rating Catalog Topology Buck Iout (max) (A) 1 Vin (max) (V) 40 Vin (min) (V) 4 Vout (max) (V) 28 Vout (min) (V) 0.8 Features Enable, Forced PWM, Light-load efficiency, Overcurrent protection, Pre-bias startup, Synchronous rectification, UVLO fixed Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000005 Duty cycle (max) (%) 98 TI functional safety category Functional Safety-Capable
Rating Catalog Topology Buck Iout (max) (A) 1 Vin (max) (V) 40 Vin (min) (V) 4 Vout (max) (V) 28 Vout (min) (V) 0.8 Features Enable, Forced PWM, Light-load efficiency, Overcurrent protection, Pre-bias startup, Synchronous rectification, UVLO fixed Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000005 Duty cycle (max) (%) 98 TI functional safety category Functional Safety-Capable
SOT-23-THN (DDC) 6 8.12 mm² (2.9 mm × 2.8 mm)
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40ºC to 125ºC ambient operating temperature range
  • Configured for rugged automotive applications
    • 4V to 40V input voltage range
    • 1A continuous output current
    • 60ns minimum on-time
    • 2.1MHz fixed switching frequency
    • –40ºC to 150ºC junction temperature range
    • Cycle-by-cycle short-circuit protection
    • Precision enable
    • ±1% voltage reference accuracy
    • 1.8ms internal soft start
  • Small design size and ease of use
    • Integrated synchronous rectification
    • Internal compensation for ease of use
    • SOT23-6 package
  • Forced pulse width modulation (FPWM) and pulse frequency modulation (PFM) modes available
  • Pin-to-pin compatibility with existing SOT23-6 devices
    • LMR50410-Q1, TPS560430-Q1
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40ºC to 125ºC ambient operating temperature range
  • Configured for rugged automotive applications
    • 4V to 40V input voltage range
    • 1A continuous output current
    • 60ns minimum on-time
    • 2.1MHz fixed switching frequency
    • –40ºC to 150ºC junction temperature range
    • Cycle-by-cycle short-circuit protection
    • Precision enable
    • ±1% voltage reference accuracy
    • 1.8ms internal soft start
  • Small design size and ease of use
    • Integrated synchronous rectification
    • Internal compensation for ease of use
    • SOT23-6 package
  • Forced pulse width modulation (FPWM) and pulse frequency modulation (PFM) modes available
  • Pin-to-pin compatibility with existing SOT23-6 devices
    • LMR50410-Q1, TPS560430-Q1

LMR70410-Q1 is a 40V, 1A synchronous buck switching regulator in an easy to use SOT23-6 package. LMR70410-Q1 can deliver up to 1A DC load current in a small design size and can operate between 4V to 40V DC supply voltage. LMR70410-Q1 operates at a fixed 2.1MHz switching frequency to support the use of relatively small inductors to optimize overall design size.

LMR70410-Q1 features precision enable UVLO which allows the designer to program the input voltage at which the device is turned on or off through the use of a resistor divider between VIN and GND. LMR70410-Q1 implements cycle-by-cycle overcurrent protection which limits the maximum output current even as the output voltage falls to zero. Thermal shutdown is implemented to turn off the LMR70410-Q1 if the junction temperature exceeds the thermal shutdown threshold.

LMR70410-Q1 features both FPWM and PFM variants allowing designs to be optimized for either fixed frequency across load or higher light load efficiency. The internal soft-start time is set internally to be 1.8ms (typical).

LMR70410-Q1 is part of a family of pin-to-pin devices that support load currents ranging from 0.6A to 1A. This family is pin-to-pin compatible with other SOT23-6 devices, such as TPS560430-Q1 and LMR50410-Q1.

LMR70410-Q1 is a 40V, 1A synchronous buck switching regulator in an easy to use SOT23-6 package. LMR70410-Q1 can deliver up to 1A DC load current in a small design size and can operate between 4V to 40V DC supply voltage. LMR70410-Q1 operates at a fixed 2.1MHz switching frequency to support the use of relatively small inductors to optimize overall design size.

LMR70410-Q1 features precision enable UVLO which allows the designer to program the input voltage at which the device is turned on or off through the use of a resistor divider between VIN and GND. LMR70410-Q1 implements cycle-by-cycle overcurrent protection which limits the maximum output current even as the output voltage falls to zero. Thermal shutdown is implemented to turn off the LMR70410-Q1 if the junction temperature exceeds the thermal shutdown threshold.

LMR70410-Q1 features both FPWM and PFM variants allowing designs to be optimized for either fixed frequency across load or higher light load efficiency. The internal soft-start time is set internally to be 1.8ms (typical).

LMR70410-Q1 is part of a family of pin-to-pin devices that support load currents ranging from 0.6A to 1A. This family is pin-to-pin compatible with other SOT23-6 devices, such as TPS560430-Q1 and LMR50410-Q1.
filter Andere DC/DC-Wandler suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt LMR70410-Q1 4V to 40V, 1A Automotive Synchronous Buck Converter datasheet PDF | HTML 09.10.2026

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LMR70410QEVM — LMR70410-Q1 – Evaluierungsmodul

Das LMR70410-Q1-Evaluierungsmodul (EVM) bietet einen Arbeitsschaltplan und eine Plattform zur Evaluierung der Leistung der Bausteinfamilie LMR704XX-Q1. Das EVM arbeitet über einen großen Eingangsspannungsbereich von 5,5 V bis 40 V und bietet einen geregelten 5-V-Ausgang. Dieses EVM ist für Lasten (...)
Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOT-23-THN (DDC) 6 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos