LPV542

AKTIV

Dual-RRIO-Operationsverstärker mit 5,5 V, 8 kHz, extrem niedrigen Ruhestrom (480 nA), min. Versorgun

Jetzt bestellen

Datenblatt

document-pdfAcrobat LPV542 Dual Nanopower 1.8 V, 490nA, RRIO CMOS Operational Amplifier datasheet (Rev. A) (Englisch) PDF | HTML

Eine neuere Version dieses Produkts ist verfügbar

open-in-new

Alternativen vergleichen

Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung.

TLV8542

AKTIV

Dual-RRIO-Operationsverstärker mit 3,6 V, 8 kHz, extrem niedrigem Ruhestrom (500 nA) Lower supply range (1.7 V to 3.6 V), higher power (.0005 mA)

LPV542

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.6

Rail-to-rail

In, Out

GBW (typ) (MHz)

0.008

Slew rate (typ) (V/µs)

0.0037

Vos (offset voltage at 25°C) (max) (mV)

3

Iq per channel (typ) (mA)

0.00048

Vn at 1 kHz (typ) (nV√Hz)

250

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

1

Features

EMI Hardened

CMRR (typ) (dB)

101

Iout (typ) (A)

0.03

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

0.00085

Input common mode headroom (to positive supply) (typ) (V)

0.00048

Output swing headroom (to negative supply) (typ) (V)

0.002

Output swing headroom (to positive supply) (typ) (V)

-0.003

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.6

Rail-to-rail

In, Out

GBW (typ) (MHz)

0.008

Slew rate (typ) (V/µs)

0.0037

Vos (offset voltage at 25°C) (max) (mV)

3

Iq per channel (typ) (mA)

0.00048

Vn at 1 kHz (typ) (nV√Hz)

250

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

1

Features

EMI Hardened

CMRR (typ) (dB)

101

Iout (typ) (A)

0.03

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

0.00085

Input common mode headroom (to positive supply) (typ) (V)

0.00048

Output swing headroom (to negative supply) (typ) (V)

0.002

Output swing headroom (to positive supply) (typ) (V)

-0.003

VSSOP (DGK)

8

14.7 mm² (3 mm × 4.9 mm)

X1SON (DNX)

8

9 mm² (3 mm × 3 mm)

Wide Supply Range: 1.6 V to 5.5 V
Low Supply Current: 490 nA (typical/channel)
Good Offset Voltage: 3 mV (maximum/room)
Good TcVos: 1µV/°C (typical)
Gain-Bandwidth: 8 kHz (typical)
Rail-to-Rail Input and Output
Unity-Gain Stable
Low Input Bias Current : 1 pA (typ)
EMI Hardened
Temperature Range: –40°C to 125°C
Thin 3 mm × 3 mm × 0.45 mm X1SON package

Wide Supply Range: 1.6 V to 5.5 V
Low Supply Current: 490 nA (typical/channel)
Good Offset Voltage: 3 mV (maximum/room)
Good TcVos: 1µV/°C (typical)
Gain-Bandwidth: 8 kHz (typical)
Rail-to-Rail Input and Output
Unity-Gain Stable
Low Input Bias Current : 1 pA (typ)
EMI Hardened
Temperature Range: –40°C to 125°C
Thin 3 mm × 3 mm × 0.45 mm X1SON package

The LPV542 is an ultra-low-power, dual operational amplifier that provides 8kHz of bandwidth from 490nA of quiescent current making it well suited for battery-powered applications such as health and fitness wearables, building automation, and remote sensing nodes.

Each amplifier has a CMOS input stage with pico-amp bias currents which reduces errors commonly introduced in megaohm feedback resistance topologies such as photodiode and charge sense applications. In addition, the input common-mode range extends to the power supply rails and the output swings to within 3 mV of the rails, maintaining the widest dynamic range possible. Likewise, EMI protection is designed into the LPV542 in order to reduce system sensitivity to unwanted RF signals from mobile phones, WiFi, radio transmitters, and tag readers.

The LPV542 operates on a supply voltage as low as 1.6 V, ensuring continuous superior performance in low battery situations. The device is available in an 8-pad, low-profile, leadless 3 mm × 3 mm × 0.45 mm X1SON package and a standard 8 pin VSSOP.

The LPV542 is an ultra-low-power, dual operational amplifier that provides 8kHz of bandwidth from 490nA of quiescent current making it well suited for battery-powered applications such as health and fitness wearables, building automation, and remote sensing nodes.

Each amplifier has a CMOS input stage with pico-amp bias currents which reduces errors commonly introduced in megaohm feedback resistance topologies such as photodiode and charge sense applications. In addition, the input common-mode range extends to the power supply rails and the output swings to within 3 mV of the rails, maintaining the widest dynamic range possible. Likewise, EMI protection is designed into the LPV542 in order to reduce system sensitivity to unwanted RF signals from mobile phones, WiFi, radio transmitters, and tag readers.

The LPV542 operates on a supply voltage as low as 1.6 V, ensuring continuous superior performance in low battery situations. The device is available in an 8-pad, low-profile, leadless 3 mm × 3 mm × 0.45 mm X1SON package and a standard 8 pin VSSOP.

filter

Andere Universal-Operationsverstärker suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 3

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Datenblatt	LPV542 Dual Nanopower 1.8 V, 490nA, RRIO CMOS Operational Amplifier datasheet (Rev. A)	PDF \| HTML	25.11.2015
	E-book	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	28.03.2017
	Anwendungshinweis	Precision Voltage Offset: When Does it Matter? (Rev. A)		02.11.2016

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

AMP-PDK-EVM — Evaluierungsmodul für das Verstärker-Leistungs-Entwicklungskit

Das Verstärker-Leistungs-Entwicklungskit (PDK) ist ein Evaluierungsmodul (EVM) zum Testen gängiger Operationsverstärker (OpAmp)-Parameter und ist mit den meisten Operationsverstärkern und Komparatoren kompatibel. Das EVM-Kit bietet eine Hauptplatine mit verschiedenen gesockelten (...)

Benutzerhandbuch: PDF | HTML

Unterstützte Produkte und Hardware

Ansichtsoptionen

Evaluierungsplatine

DIP-ADAPTER-EVM — Evaluierungsmodul für DIP-Adapter

Schnelleres Entwickeln von Operationsverstärker-Prototypen und Testen derselben mit dem DIP-Adapter-EVM, welches eine schnelle, einfache und preiswerte Möglichkeit zum Verbinden mit kleinen, oberflächenmontierbaren ICs über eine Schnittstelle bietet. Sie können jeden unterstützten (...)

Unterstützte Produkte und Hardware

Vorrätig

Limit:

Zum Bestellen bitte anmelden

lock

Melden Sie sich an, um den Lagerbestand einzusehen

??asset.out-of-stock-ti_de_DE??

Nicht verfügbar

Simulationsmodell