OPA4137

AKTIV

Vierfach-RRI-Operationsverstärker, 36 V, 1 MHz

Jetzt bestellen

Datenblatt

document-pdfAcrobat OPA137, OPA2137, OPA4137 Low Cost FET-Input Operational Amplifiers Micro Amplifier™ Series datasheet (Rev. A) (Englisch) PDF | HTML

Eine neuere Version dieses Produkts ist verfügbar

open-in-new

Alternativen vergleichen

Drop-In-Ersatz mit gegenüber dem verglichenen Baustein verbesserter Funktionalität.

OPA4990

AKTIV

Energieeffizienter (0,12 mA) Vierfach-Operationsverstärker, 40 V, 1,1 MHz Pin-to-pin upgrade with improved performance: lower Vos(1.5mV), higher slew rate(4.5V/us) and output current(80mA)

OPA4137

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

36

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

4.5

Rail-to-rail

In to V+

GBW (typ) (MHz)

1

Slew rate (typ) (V/µs)

3.5

Vos (offset voltage at 25°C) (max) (mV)

3

Iq per channel (typ) (mA)

0.22

Vn at 1 kHz (typ) (nV√Hz)

45

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Offset drift (typ) (µV/°C)

15

Input bias current (max) (pA)

100

CMRR (typ) (dB)

84

Iout (typ) (A)

0.025

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

3

Input common mode headroom (to positive supply) (typ) (V)

0

Output swing headroom (to negative supply) (typ) (V)

1.2

Output swing headroom (to positive supply) (typ) (V)

-1.1

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

36

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

4.5

Rail-to-rail

In to V+

GBW (typ) (MHz)

1

Slew rate (typ) (V/µs)

3.5

Vos (offset voltage at 25°C) (max) (mV)

3

Iq per channel (typ) (mA)

0.22

Vn at 1 kHz (typ) (nV√Hz)

45

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Offset drift (typ) (µV/°C)

15

Input bias current (max) (pA)

100

CMRR (typ) (dB)

84

Iout (typ) (A)

0.025

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

3

Input common mode headroom (to positive supply) (typ) (V)

0

Output swing headroom (to negative supply) (typ) (V)

1.2

Output swing headroom (to positive supply) (typ) (V)

-1.1

PDIP (N)

14

181.42 mm² (19.3 mm × 9.4 mm)

SOIC (D)

14

51.9 mm² (8.65 mm × 6 mm)

FET Input: IB = ±10pA
Low offset voltage: ±300mV
Wide supply range: ±2.25 V to ±18 V
Low quiescent current: 120µA/channel
Excellent speed/power: 1.1MHz
Input to positive supply
Single, dual, and quad

FET Input: IB = ±10pA
Low offset voltage: ±300mV
Wide supply range: ±2.25 V to ±18 V
Low quiescent current: 120µA/channel
Excellent speed/power: 1.1MHz
Input to positive supply
Single, dual, and quad

OPA137 series FET- input operational amplifiers are designed for low cost and miniature applications. In addition to small size (SOT-23-5 and MSOP-8 packages), amplifiers provide low input bias current (±10pA), low quiescent current (120µA/ channel), and high open-loop gain (145dB).

Either single (+4.5V to +36V) or dual (±2.25V to ±18V) supplies can be used. The input common-mode voltage range includes the positive supply an excellent choice for many single-supply applications. Single, dual, and quad versions have identical specifications for maximum design flexibility.

OPA137 op amps are easy to use and free from phase inversion and overload problems found in some FET- input amplifiers. High performance, including linearity, is maintained as the amplifiers swing to the specified limits. In addition, the combination of high slew rate (4.5V/µs) and wide bandwidth (1.1MHz) provide fast settling time verifies good dynamic response. Dual and quad designs feature completely independent circuitry for lowest crosstalk and freedom from interaction.

The single (OPA137) packages are the tiny 5-lead SOT-23-5 surface mount, SO-8 surface mount, and 8-pin DIP. The dual (OPA2137) comes in the miniature MSOP-8 surface mount, and the SO-8 surface mount. The quad (OPA4137) packages are the SO-14 surface mount and the 14-pin DIP. All are specified from – 40°C to +85°C and operate from – 55°C to +125°C. A SPICE macro-model is available for design analysis.

OPA137 series FET- input operational amplifiers are designed for low cost and miniature applications. In addition to small size (SOT-23-5 and MSOP-8 packages), amplifiers provide low input bias current (±10pA), low quiescent current (120µA/ channel), and high open-loop gain (145dB).

Either single (+4.5V to +36V) or dual (±2.25V to ±18V) supplies can be used. The input common-mode voltage range includes the positive supply an excellent choice for many single-supply applications. Single, dual, and quad versions have identical specifications for maximum design flexibility.

OPA137 op amps are easy to use and free from phase inversion and overload problems found in some FET- input amplifiers. High performance, including linearity, is maintained as the amplifiers swing to the specified limits. In addition, the combination of high slew rate (4.5V/µs) and wide bandwidth (1.1MHz) provide fast settling time verifies good dynamic response. Dual and quad designs feature completely independent circuitry for lowest crosstalk and freedom from interaction.

The single (OPA137) packages are the tiny 5-lead SOT-23-5 surface mount, SO-8 surface mount, and 8-pin DIP. The dual (OPA2137) comes in the miniature MSOP-8 surface mount, and the SO-8 surface mount. The quad (OPA4137) packages are the SO-14 surface mount and the 14-pin DIP. All are specified from – 40°C to +85°C and operate from – 55°C to +125°C. A SPICE macro-model is available for design analysis.

filter

Andere Universal-Operationsverstärker suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 2

Top-Dokumentation	Typ	Titel	Format-Optionen	Neueste englische Version herunterladen	Datum
*	Datenblatt	OPA137, OPA2137, OPA4137 Low Cost FET-Input Operational Amplifiers Micro Amplifier™ Series datasheet (Rev. A)	PDF \| HTML		30.03.2026
	E-book	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML		28.03.2017

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

AMP-PDK-EVM — Evaluierungsmodul für das Verstärker-Leistungs-Entwicklungskit

Das Verstärker-Leistungs-Entwicklungskit (PDK) ist ein Evaluierungsmodul (EVM) zum Testen gängiger Operationsverstärker (OpAmp)-Parameter und ist mit den meisten Operationsverstärkern und Komparatoren kompatibel. Das EVM-Kit bietet eine Hauptplatine mit verschiedenen gesockelten (...)

Benutzerhandbuch: PDF | HTML